เงื่อนไขการค้นหา

ทักษะ:

Research, Product Design, English

ประเภทงาน:

งานประจำ

• Develop and implement technical solutions in two or more technical areas. Lead smaller projects and may coordinate other engineers including reviews of their work.
• Reviews and interprets customer documentation, conducts appropriate research, analysis and experiments with minimal direction from senior staff.
• Creates technical proposals (solution and timelines) based on requirements.
• Provide high level test hardware and software solution architecture.
• Create structural or functional test strategy and test plan to meet project goals and requirements.
• Create technical proposals with costed BOM and hours estimates.
• Create product test requirements with guidance from senior staff and collaboration with customer designers.
• Provides Technical program management for small projects.
• Develop production test strategies based on product design specification.
• Design and develop test solutions including hardware & software elements and then system integration, qualification, and installation to meet product, quality and test requirements outlined in the test plan.
• Debug of tester issues using design of experiments, tools, and failure analysis methodologies.
• Execute all validation/qualification requirements by applying statistical and common industry methods.
• Stabilization of Test Solutions for manufacturing working to optimize with process teams focusing on cycle time and yield.
• Test developers may also work with product design teams with feedback from product testability, test coverage, diagnosability, reparability, firmware/diagnostics and user experience.
• Keeping up to date with relevant industry knowledge and regulations.
• Knowledge/Skills/Competencies.
• DIGITAL/LOGIC: Familiarity of EE-Embedded such as FPGA, DSP and Microcontroller 8-bit, 32-bit ARM Cortex, Familiarity of communications protocols such as RS-232, UART, SPI, I2C, USB and PCIE Gen 3 and higher,.
• Knowledge of Timming diagram of Digital signal analysis.
• POWER: EE-POWER Switching power supplies, Familiarity of Power efficiency in AC-DC converter, EE-POINT of Load Supplies, Power Integrity-CoreSim.
• PCB/LAYOUT: Signal Integrity, Power Integrity, Tolerance Analysis, Cadence, Mentor Xpedition, Mentor PADS, Altium Designer, Other Layout tools (Preferably Altium Designer), Print Circuit Board Fabrication.
• SCHEMATIC DESIGN/SIGNAL INTEGRITY: EE-Digital, EE-Analog, Tolerance Analysis, Static Timing, Schematic Modeling.
• ANALOG: EE-Analog, Tolerance Analysis, Mixed signals of digital and Analog, Grounding balance of multiple systems.
• RF: RF Design(20Ghz).
• Typical Experience.
• Minimum of 5+ yrs of experience Structural and Functional Test development / support for electronic / automotive industry.
• Strong knowledge on test development (SW and Test fixtures).
• Proven strong knowledge on test programming development.
• Familiarity with Altium Designer and PCB fabrication.
• Knowledge on fixtures design, setup/integration.
• Good verbal, and written communication skills in English.
• Must have experience with disciplined operations.
• Must have experience working with and coordinating well with multiple intercompany organizations.
• Typical Education.
• Degree or higher in Electronics Engineering or equivalent.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Research, Linux, Data Entry

ประเภทงาน:

งานประจำ

• Design and develop technical solutions without assistance in a limited number of technical fields supporting common segments/technologies. May also solve complex problems in cooperation with a team of other engineers.
• Attend and interact in technical customer meetings.
• Research systems ideas and will draw up plans for these systems.
• Design, modify and implement systems that meet customer and Celestica needs.
• Create designs in line with Celesticas procedures, regulations and customer standards.
• Keep up to date with relevant industry knowledge and regulations.
• Solve complex problems.
• Design hardware circuit by using Allegro Cadence Concept HDL tool.
• BOM / ECO /DVN Management.
• Support Hardware bring up in NPI phase and validation of Networking, Storage, and Server products per Design Test Plan.
• Qualify alternative components for compatibility, cost-effectiveness and benchmarking.
• Work with cross-function teams to identify root cause of the design issue.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Familiar with electrical design tools such as Cadence, OrCad.
• Knowledge in Analog circuit design and Digital circuit design ( low speed and high speed ).
• Hands-on lab debugging and troubleshooting.
• Knowledge of Network switch product, x86 or ARM platform.
• Knowledge of BOM structure and Engineering change process.
• Knowledge of Linux command.
• Self-motivated with a strong multidisciplinary background.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 3 to 5 years of related experienc;Experience in similar job roles.
• Typical Education.
• Bachelors Degree in Electronic Engineering or equivalent.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Assurance, Cost Estimation, Procurement, English

ประเภทงาน:

งานประจำ

• Provide technical solution, technical assurance, and consultation to Asset, on the new or modification project, with regards to Electrical Engineering discipline, including engineering study and evaluation (feasibility study, conceptual design, basic and detailed engineering) engineering cost estimation, problem analysis, field troubleshooting, as well as implementation of new technologies.
• Be representative in technical meeting for facility engineering part to provide advice/ recommendation in own expertise, including to any technical review sessions, HAZ ...
• Provide advice/ recommendation and perform necessary procurement process.
• Provide inputs to support the study of new technology and renewable energy.
• Provide inputs to support the development/review of related engineering standards, procedures, guidelines, etc.
• Ensure work quality to be aligned with Engineering standard, policy, procedures, and guidelines.
• Promote and ensure an effective implementation of SSHE rules and procedures as well as engineering best practices.
• Professional Knowledge & Experiences.
• Bachelor s Degree or higher in Electrical Engineering or related fields.
• Minimum 10 years experience in the engineering and design of the electrical systems preferably in the oil and gas or a similar industry.
• Experiences in working on construction and modification projects.
• Has strongly knowledge in the engineering/design, especially the electrical equipment, generators, transformers, switchgear, motor control centers, uninterruptible power supply, DC chargers, batteries, variable frequency drives, motors, solar and wind power generation, explosion proof equipment, cables, and electrical control system, interface requirements, specifications, codes & standards.
• Be able to design, select, and develop electrical document such as SLD, power generation and distribution sizing, cable sizing, load list, lighting and earthing layout, power layout, interconnection diagram, heat tracing diagram.
• Be able to select explosive protected equipment as per hazardous area classification.
• Be able to perform technical clarification, and technical bid evaluation.
• Be able to prepare material take off within project timeline.
• Be able to participate and supervise FAT, SAT, pre-commissioning, and the commissioning work of electrical equipment or package to comply with the applicable specifications, procedures, codes, and standards.
• Be able to prepare scope of work for construction.
• Ability to use engineering detailed design and analysis software such as ETAP.
• Good communication, interpersonal and presentation skills.
• Good command of both written and spoken English.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

AutoCAD, Visio, English

ประเภทงาน:

งานประจำ

• Responsible for planning preventive maintenance schedules for the electrical system.
• Responsible for coordinating and managing vendors and suppliers to preventive maintenance and payment plans.
• 2nd Level support to Data Center Operation (FOC), on site to solve Incident and Problem management.
• 2nd Level support to engineer team all site, Data Center (TT1, TT2, MTG, BNA).
• To create & update reports and documents to comply with ISO 20k, 22k, 27k, 50k & TCOS standards.
• Review PUE, cost saving energy and report.
• Measured Efficiency air system and record annual report.
• Responsible for implementing Electrical such as MU, TR, MDB, GEN, UPS, RECT, BATT, ATS.
• Bachelor degree of Engineering, Electrical engineering or related field.
• More than 5 years of experience in maintenance of electrical systems such as RMU, TR, MDB, GEN, UPS, RECT, BATT, ATS: implement and support electrical systems in buildings or Data Centers.
• At least 1 years experience in designing electrical systems (such as RMU, TR, MDB, GEN, UPS, RECT, BATT, ATS). implement, and support for electrical systems in building.
• Able to use the program AutoCAD, Visio.
• Able to work as a team and work in and standby on call on holiday.
• Able to work overtime if required and a hotline arrives (Less than 1 hour on site from your home).
• Proficiency in English communication is beneficial for both reading and writing.
• Work Location: TrueIDC - Bangna Site (KM26).

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Compliance, Procurement, Project Management, English

ประเภทงาน:

งานประจำ

• Lead the preparation of bids for substation control and protection systems, including both technical and commercial components.
• Develop and implement bid strategies to ensure competitiveness and compliance with client specifications.
• Collaborate with engineering, procurement, and project management teams to capture vital information for bid proposals.
• Provide technical expertise in the design and implementation of control and protection systems for substations.
• Ensure that all technical aspects of the bid meet industry standards and client requirements.
• Engage with clients to understand their specific needs and requirements for control and protection systems.
• Present and explain bid proposals to clients, addressing any technical and commercial questions or concerns.
• Prepare detailed cost estimates for control and protection systems, including hardware, software, labor, and other associated costs.
• Analyze and optimize costs to ensure driven pricing while maintaining quality and compliance.
• Ensure all bid documentation is complete, accurate, and submitted within the required timelines.
• Maintain comprehensive records of all bid proposals and related communications.
• Identify and assess potential risks associated with control and protection system projects.
• Develop and implement risk mitigation strategies to address identified risks.
• Work closely with multi-functional teams, including engineering, procurement, and project management, to ensure alignment on bid proposals.
• Provide mentorship and support to team members involved in the bidding process.
• Conduct market research to identify trends, opportunities, and the competitive landscape in control and protection systems.
• Use market insights to advise bid strategies and improve competitiveness.
• Ensure all bid proposals align with company policies, industry standards, and regulatory requirements.
• Stay updated on relevant regulations and standards affecting control and protection systems (e.g., IEC, IEEE).
• What You Bring.
• Bachelor s degree in Electrical Engineering or a related field.
• Proven at least 5 years of experience in bid management, specifically in control and protection systems for substations.
• Strong understanding of substation control and protection system design, implementation, and operation.
• Excellent project management and organizational skills.
• Strong analytical and problem-solving abilities.
• Fluence in English for communication and presentation skills.
• Our Grid Technologies division enables a reliable, sustainable, and digital grid. The power grid is the backbone of the energy transition. Siemens Energy offers a leading portfolio and solutions in HVDC transmission, grid stabilization and storage, high voltage switchgears and transformers, and digital grid technology.
• Who is Siemens Energy?.
• At Siemens Energy, we are more than just an energy technology company. We meet the growing energy demand across 90+ countries while ensuring our climate is protected. With more than 98,000 dedicated employees, we not only generate electricity for over 16% of the global community, but we re also using our technology to help protect people and the environment.
• Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.
• Find out how you can make a difference at Siemens Energy: https://www.siemens-energy.com/employeevideo.
• Our Commitment to Diversity.
• Lucky for us, we are not all the same. Through diversity, we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character - no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences.
• Rewards/Benefits.
• The compensation and benefits shall follow SE Thailand policy.
• Jobs & Careers: https://jobs.siemens-energy.com/jobs.

ประสบการณ์:

2 ปีขึ้นไป

ทักษะ:

Production Engineering, Electrical Engineering, Problem Solving

ประเภทงาน:

งานประจำ

• Design & Innovate: Develop and enhance the processes and facilities of our production line for both current and new models.
• Collaborate & Coordinate: Work closely with production, maintenance, quality, and safety teams to support project implementation and ensure seamless operations.
• Global Engagement: Oversee and collaborate with our international production plants, focusing on benchmarking best practices, introducing new models, and driving continuous improvement through Kaizen methodologies.
• Qualifications to consider: Bachelor's degree in Mechanical / Industrial / Automotive / Electrical Engineering or related field.
• 2 years experience in Automotive business or New graduated are welcome.
• Experience in production / manufacturing engineering, preferably in the automotive industry.
• Strong Logical thinking, analytical skills, problem solving skills & decision making.
• Able to communicate, discuss, and present in English (TOEIC score of 550 or higher).
• Proactive approach to challenges and learn new things.
• Strong interpersonal skills, positive attitude, punctuality, and the ability to work under high pressure.
• If you are interested in this job role, please prepare your updated resume or LinkedIn profile for the application process through the Nissan Job Portal.
• Only shortlisted candidate will be contacted for an interview".
• For more information about Nissan's products, services, and commitment to sustainable mobility, visit nissan-global.com. You can also follow us on Facebook, Instagram, X and LinkedIn and see all our latest videos on YouTube.
• Why Nissan?.
• You will definitely get the right answers why you should join us through watching the video on YouTube.
• Samut Prakan Thailand

ทักษะ:

Project Management, Financial Reporting, Accounting

ประเภทงาน:

งานประจำ

• Responsible for understanding and implementing the customers technical roadmap and related process development projects.
• Lead and implement the development and release of the full manufacturing process for new customer products.
• Understand and provide feedback on customers technical requirements to team members and management.
• Responsible for developing and implementing costed and optimized feedback using Design for manufacturability (DFX) tools and processes, with the goal of reducing manufacturing cost and improving quality and reliability of product.
• Develop, plan and lead the assessment of the capability of process applications using Design of Experiments.
• Devise process controls and data collection strategies and evaluate complex data to assist with reporting yield, reliability and diagnoses to root causes failures impacting product quality.
• Ensure accurate and timely communication to management on critical technical and business issues.
• Set yearly plans and goals for the department and give direction on expected performance and provide regular performance evaluations and ongoing feedback. Accountable for all department objectives and achieving agreed targets for key performance indicators.
• Knowledge/Skills/Competencies.
• Project Management - Ability to manage/lead complex, multiple line engineering projects that may also involve other functions. Demonstrate solid understanding of the technical, financial and people aspects of the project. Able to create a project/change management plan and ensure that the project is delivered within the assigned time and budget. Ability to recognize project barriers and develop mitigation plans.
• Leadership - Demonstrate "People & Team Leadership Behaviors" as per Celestica Leadership Imperatives.
• Financial Acumen / Business Planning - Ability to create financial plans for your projects, align them internally with your line of management and other functions and externally if needed. Create project plans, profitability calculations, risk and sensitivity analysis, able to recognize barriers and mitigate profitability risks. Fully knowledgeable about internal and external financial reporting, accounting and tax requirements relevant to your area of expertise.
• The following competencies may also be required: Coaching/Mentoring; Communication/Negotiation/Presentation; Creative Problem Solving; Customer Interaction/Stakeholder Management; Quality & Lean; Working Effectively with Others; D/PFMEA; 8D/Corrective Action; Equipment Safety; Design of Experiments (DOE).
• Typical Experience.
• 10+ years of work experience in PCB assembly manufacturing field.
• Typical Education.
• Degree or higher in Mechanical/Chemical/Electrical Engineering or equivalent.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Electronics, English

ประเภทงาน:

งานประจำ

• Under supervision and with assistance develop, qualify, and install test applications into manufacturing operations.
• Optimize the Test process focusing on productivity improvements to cycle time and yield.
• Debug of solutions provided by external vendors or customers based on training supplied.
• Assist with test optimization based on feedback from customers and operations partners based on a solid unstinting of the test coverage, diagnosability, reparability, firmware/diagnostics and user experience.
• Maintain with minimal supervision, the continuing performance of the Testers and participate in the OEE improvement plans, yield and test time optimization.
• Knowledge/Skills/Competencies.
• Good logical thinking and analytical skills.
• Good command of English and Thai speaking.
• Ability to work in Laem Chabang, Chonburi.
• Typical Experience.
• 0-3 years of working experience in testing and debug in both electrical and optical level.
• Welcome new graduated.
• Typical Education.
• Degree or higher in Telecommunication Engineering or Electronics Engineering.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Electronics, English

ประเภทงาน:

งานประจำ

• Under supervision and with minimal assistance define, specify, qualify, install, support and optimize test process and test equipment solutions for manufacturing.
• Lead test process optimization, with a focus on productivity improvements to cycle time and yield for a specific set of equipment within an Operations value stream.
• Debug of test process and equipment solutions using design of experiments, tools, and failure analysis methodologies.
• Collaborate with Quality, Process and Equipment engineers to detect and solve product and test yield and performance issues.
• Develop improvement roadmaps for test coverage, diagnosability, reparability, test time reductions and OEE.
• Analyze and interpret data and information from yield reports and equipment logs and product diagnostics to determine sources of yield loss.
• Provide solution support to process engineers to improve detection of known defect types as part of a Process Control plan.
• Support development of test equipment integration into Manufacturing Execution Systems including yield, tester log and product parametric information.
• Knowledge/Skills/Competencies.
• Good logical thinking and analytical skills.
• Good command of English and Thai speaking.
• Ability to work in Laem Chabang, Chonburi.
• Typical Experience.
• 4-8 years of working experience in testing and debug in both electrical and optical level.
• Typical Education.
• Degree or higher in Telecommunication Engineering or Electronics Engineering.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

8 ปีขึ้นไป

ทักษะ:

Project Management, Industrial Engineering, English

ประเภทงาน:

งานประจำ

• Bachelor's degree in a technical field, or equivalent practical experience.
• 8 years of experience in program management.
• Experience with technical teams, project management, engineering, and construction of data centers or mission facilities.
• Experience with data center equipment/environments (e.g., civil/structural, electrical switchgear, generators, chillers, security monitoring).
• Ability to communicate in Thai and English fluently to support vendor and contractor management in this region.
• Preferred qualifications:Master's degree in Architectural, Electrical, Mechanical or Industrial Engineering, Construction Management, or related technical field.
• Certification in Construction manager, Project Management Professional (PMP), registered architect, etc.
• 10 years of experience managing multi-group/disciplinary construction projects with civil, architectural, electrical, mechanical, controls, security monitoring, fire safety, networking/fiber, server equipment, systems, and infrastructure.
• Experience in requirements gathering, resource organization, task prioritization, and scheduling and achieving objectives within set goals.
• Experience managing vendor relationships and an understanding of standard practices in the design and construction industry, and pursuit of industry leading practices.
• Knowledge of fast track design build processes.
• Google's projects, like our users, span the globe and require managers to keep the big picture in focus while being able to dive into the unique engineering challenges we face daily. As a Technical Program Manager at Google, you lead complex, multi-disciplinary engineering projects using your engineering expertise. You plan requirements with internal customers and usher projects through the entire project lifecycle. This includes managing project schedules, identifying risks and clearly communicating them to project stakeholders. You're equally at home explaining your team's analyses and recommendations to executives as you are discussing the technical trade-offs in product development with engineers.Using your extensive technical and leadership expertise, you manage projects of various size and scope, identifying future opportunities, improving processes and driving the technical directions of your programs.
• Behind everything our users see online is the architecture built by the Technical Infrastructure team to keep it running. From developing and maintaining our data centers to building the next generation of Google platforms, we make Google's product portfolio possible. We're proud to be our engineers' engineers and love voiding warranties by taking things apart so we can rebuild them. We keep our networks up and running, ensuring our users have the best and fastest experience possible.
• ResponsibilitiesProvide management of data centers at multiple scales.
• Manage and coordinate the needs of multiple partner teams, while managing changes and maintaining a focus on keeping the project on schedule, budget, quality, and safety.
• Manage technical projects in a rapidly changing industry.
• Deliver data center facility from start to commissioning and understand the nuances and risks that will need to be managed.
• Google is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. We also consider qualified applicants regardless of criminal histories, consistent with legal requirements. See alsoGoogle's EEO Policy andEEO is the Law. If you have a disability or special need that requires accommodation, please let us know by completing ourAccommodations for Applicants form.

ทักษะ:

Assurance, Cost Estimation, Mechanical Engineering, English

ประเภทงาน:

งานประจำ

• Provide technical support, technical assurance and consultation on power and renewables project, with regards to engineering discipline, including engineering study and evaluation (feasibility study, conceptual engineering design, basic and detailed, engineering) engineering cost estimation, problem analysis, field troubleshooting, project acquisition due diligence as well as implementation of new technologies.
• Review, evaluate and recommend development concepts, facility design and decommissioning.
• Study, analyse, review, and recommend construction options and solutions to the process that will enhance/ optimize operations at minimum costs and with proper safety considerations. Determine effect of such construction on the process and report the findings and feasibility.
• Ensure work quality to be aligned with engineering standard, policy, procedures and guidelines.
• Work in close coordination with Project Team in developing and reviewing the project s work plan and scheduling. Carry out technical and economic justification of the proposed work plan and budgets as well as provide comments and recommendation for approval.
• Monitor project performance, progress, and expenditure by reviewing the operation activities report and statement of expenditure to achieve the project s objectives.
• Participate in commercial & financial, and technical meetings in order to obtain all necessary information, problems or obstacles for further study and analysis in terms of project return and value added and follow up the project s achievement and improvement.
• Integrate the overall of project work plan to minimize production loss and shutdown time of operation.
• Generate monitoring and following report to ensure required project deliverable and performance.
• Manage engineers, contractors, vendors, and all stakeholders to execute projects and ensure that the projects performance in terms of technical quality, work progress, and cost control are aligned with the defined strategies and approved plans.
• Prepare bidding package for construction, operations and maintenance, project material/ equipment, and others as per project requirements.
• Professional Knowledge & Experiences.
• Bachelor s Degree or higher in Electrical Engineering or Mechanical Engineering or related fields (Preferable Master s Degree in Energy/ Renewables related).
• Minimum 10 years experience in Power and Renewables Engineering.
• Experiences in Project Development, Project Management and/ or M&A is preferable.
• Has strongly knowledge in the engineering/ design, especially the electrical equipment, generators (including gas turbines, solar panal, and wind turbines), transformers, switchgear, motor control centers, uninterruptible power supply, DC chargers, batteries, variable frequency drives, motors, solar and wind power generation, explosion proof equipment, cables, and electrical control system, interface requirements, specifications, codes & standards.
• Good command of both written and spoken English.
• Ability to use engineering detailed design and analysis software such as Smart Plant Electrical and ETAP.
• Good communication, interpersonal and presentation skills.
• Additional Desirable Qualification.
• CORE Competencies.

ทักษะ:

Python, Git, Electrical Engineering, English

ประเภทงาน:

งานประจำ

• Design and develop digital logic and firmware for FPGA-based systems.
• Lead the bring-up and verification of functionality in new FPGA-based systems.
• Collaborate closely with hardware and software teams throughout the design and integration phases.
• Provide support to Integration Testing and Product Verification teams.
• Ensure that all designed modules meet required specifications and integrate seamlessly with the overall system architecture.
• This role offers the chance to work alongside world-class experts in multiple disciplines, contributing to high-impact design applications.
• Knowledge/Skills/Competencies.
• Proficiency in Verilog or VHDL programming.
• Proficiency in Python or C programming is a plus.
• Practical experience with hardware (e.g., soldering, oscilloscopes, power supplies, wiring, troubleshooting).
• Solid understanding of circuits and electronics, with the ability to read schematics and component datasheets.
• Experience with version control systems (e.g., Git) and development methodologies.
• Exceptional problem-solving, analytical, and critical thinking skills.
• Excellent documentation skills.
• Proficiency in English, both written and verbal.
• Passion for emerging technologies and enthusiasm for tackling new challenges.
• Self-motivated and capable of driving development projects to completion.
• Ability to work in Laemchabang, Chonburi.
• Typical Experience.
• 0 to 6 years.
• Typical Education.
• Bachelor's degree in Computer Engineering, Electronics Engineering, Electrical Engineering, or a related field.
• Fresh graduates are encouraged to apply.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Automation, Assembly, AutoCAD, English

ประเภทงาน:

งานประจำ

• Concept and architect automation stations and assembly lines.
• Analysis and the creation of User Requirement Specification (URS) in order to determine feasibility of using one or more machines.
• Perform engineering calculations with respect to cycle time, strength of materials, speeds, horsepower, temperature, pressure, force, etc.
• Analyze engineering drawings (mechanical and electrical) and specifications to determine if it meets process and products specifications.
• Formalize and update drawing documentation.
• Work with Celestica Global Machinery Standards.
• Liaise with vendors (local and abroad) for technical information and specifications.
• Communicate all requested design changes to various teams (within Celestica).
• Knowledge of AutoCAD and SolidWorks is an asset.
• Understanding of machinery safety and safety devices.
• Understanding of the use of pneumatics and hydraulics.
• Understanding of the use of electrical and motion devices (i.e. servo, VFDs, switches, load cells, etc.).
• Experience with robotic programming is an asset.
• An understanding of machine vision (2D, 3D and machine learning) as it applied to automation stations for identification, quality, robotic offset and alignment.
• Concept and architect automation stations and assembly lines.
• Analysis and the creation of User Requirement Specification (URS) in order to determine feasibility of using one or more machines.
• Perform engineering calculations with respect to cycle time, strength of materials, speeds, horsepower, temperature, pressure, force, etc.
• Analyze engineering drawings (mechanical and electrical) and specifications to determine if it meets process and products specifications.
• Formalize and update drawing documentation.
• Work with Celestica Global Machinery Standards.
• Liaise with vendors (local and abroad) for technical information and specifications.
• Communicate all requested design changes to various teams (within Celestica).
• Knowledge of AutoCAD and SolidWorks is an asset.
• Understanding of machinery safety and safety devices.
• Understanding of the use of pneumatics and hydraulics.
• Understanding of the use of electrical and motion devices (i.e. servo, VFDs, switches, load cells, etc.).
• Experience with robotic programming is an asset.
• An understanding of machine vision (2D, 3D and machine learning) as it applied to automation stations for identification, quality, robotic offset and alignment.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Typical Experience.
• Minimum 5 years in automation design at a machine integrator, or equivalent, designing and concepting machines from small table top to large stations.
• Basic knowledge of printed circuit board assembly/electronics manufacturing are an asset.
• Fluent in English.
• Able to work based in Laem Chabang, Chonburi, Thailand.
• Typical Education.
• Degree in Mechanical Engineering/ Electrical Control Engineering / Robotics/ Mechatronics Automation Technology or related field.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Sales, Marketing Strategy, Business Development, Laos, English

ประเภทงาน:

งานประจำ

• Responsible for Professional Installed (Project) & Commercial (Distribution) sales, coordination of all sales activities with customers to reach the sales targets of Thailand and Laos.
• Growing business through channel expansion, distribution and geographical coverage within Thailand & Laos.
• Perform market & competitor analysis and product positioning.
• Propose, design and explain a complete Installed sound system to End User, Consultants and customer.
• Develop Distribution business, channel expansion, marketing strategy online/offline for commercial sound.
• Provide technical assistant for customers to support design and tender clarification.
• Conduct presentation of Installed sound system to end user, consultant, customer and during events.
• Qualifications Bachelor s degree in Electrical, Mechanical, Electronic Engineering or other related field.
• At least 5 years sales related experience in the Prosound Industry with proven sales record.
• Experienced in Prosound Industry is an advantage.
• Experienced in project business, channel management, distribution, marketing strategy for online/offline and business development.
• In depth knowledge of local markets, channels and competitors.
• Able to work independently to achieve the sales target.
• General project sales skills in Installed sound system Project.
• Fluency in both spoken and written English.
• Additional InformationBy choice, we are committed to a diverse workforce and are an equal opportunity employer. Robert Bosch welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in the selection process.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Automation, XML, JSON, English

ประเภทงาน:

งานประจำ

• Coding and test programming for software of automation machine applications.
• Develop and deploy software applications for automation machine controlling.
• Execute code builds to test and production environments.
• Fix bugs in existing code.
• Collaborate with product, design, and automation/operation teams.
• Maintain documentation and provide machine instruction manual and training.
• Provide testing, documentation, training, and support for third-party software products.
• Resolve user-submitted problems and questions.
• Knowledge/Skills/Competencies.
• Knowledge and experience with good programming language with C#, C++, xml, API, JSON.
• Additional experience with JavaScript, HTML, VB.NET, Python, database is a plus.
• Track record of successful application development is a plus.
• Ability to write clean, well-documented code.
• Excellent complex problem solving and critical thinking skills.
• Solid troubleshooting and communication skills.
• Demonstrated analytical and critical thinking abilities.
• Basic Knowledge with image processing/machine vision, robot programming for automation is a plus.
• Have a passion for this automation job.
• Result-oriented, hard-working, and reliable person.
• Good command of speaking, writing and reading in Thai and English.
• Typical Experience.
• 0-3 years of experience in software development.
• Typical Education.
• Bachelor's Degree or Master's Degree in Computer Science or Electrical Engineering, or related filed.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Compliance, Procurement, Meet Deadlines, English

ประเภทงาน:

งานประจำ

• Prepare Tender for project and other Critical Infrastructure.
• Design & Develop cost effective solution with resonable risk evaluation.
• Generate BOQ.
• Estimate QTY required as per designed solution for Electrical.
• Ensure Specification compliance, Generate deviation list and lead technical clarification.
• Quality & Evaluation supplier.
• Coordinator scope of work definition with vendor and customer.
• Influence customer & all involving parties to accept the proposal solution.
• QualificationsBachelor Degree in Engineering, Electrical Engineering.
• 3 -5 years experience in Project Tendering, Estimating, preferably with an Engineering Procurement Construction field.
• Understanding of electrical distribution system design.
• Understanding of electrical system components such as HV, MV, LV distribution, Switchgears, Panel Design Standards, Grounding, Generator system.etc.
• Understanding of mechanical design (including cooling, piping, fire alarm.).
• Understanding on best practices and standards in electrical systems design, installation and operation requirement.
• Understanding of engineering system documentation.
• Proven skill in project estimating.
• Ability to meet deadlines and demonstration effective time management sklills.
• Execellent business ethics and integrity.
• Demonstration a flexibility in operational style to meet the requirements or multi-culture position.
• Good command in English.
• Good in Negotiation skill, Technical influence skill and presentation skill.
• Primary Location: TH-10-Bangkok.
• Schedule: Full-time Unposting Date: Ongoing