เงื่อนไขการค้นหา

ประเภทงาน:

งานประจำ

• Under supervision and with minimal assistance define, specify, qualify, install, support and optimize test process and test equipment solutions for manufacturing.
• Lead test process optimization, with a focus on productivity improvements to cycle time and yield for a specific set of equipment within an Operations value stream.
• Debug of test process and equipment solutions using design of experiments, tools, and failure analysis methodologies.
• Collaborate with Quality, Process and Equipment engineers to detect and solve product and test yield and performance issues.
• Develop improvement roadmaps for test coverage, diagnosability, reparability, test time reductions and OEE.
• Analyze and interpret data and information from yield reports and equipment logs and product diagnostics to determine sources of yield loss.
• Provide solution support to process engineers to improve detection of known defect types as part of a Process Control plan.
• Support development of test equipment integration into Manufacturing Execution Systems including yield, tester log and product parametric information.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Typical Experience.
• 4 to 8 years.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Software Development, TypeScript, MongoDB, English

ประเภทงาน:

งานประจำ

• Collaborate with the product team to ensure effective implementation of products.
• Perform full lifecycle software development, from design to testing.
• Take ownership and accountability for assigned tasks and projects.
• Design, code, document, and test software using accepted languages and frameworks.
• Follow established coding standards and processes.
• Commit to delivering high-quality products to end-users.
• Bachelor's degree in Computer Science, Engineering, or related field.
• At least 3-5+ years of relevant work experience in software development.
• Professional proficiency in written and verbal English.
• Demonstrated track record in building efficient and scalable architectural solutions.
• Strong expertise with Javascript, ECMAScript, and Typescript.
• Strong expertise with backend technologies and Node.js runtime.
• Strong expertise with React and frontend technologies.
• Preferred experience with NestJS and Next.js.
• Knowledge of design patterns, object-oriented programming (OOP), and functional programming concepts.
• Experience with backend performance optimization.
• Experience in handling, configuring, optimizing, and monitoring MongoDB, PostgreSQL, Elasticsearch.
• Experience in test automation techniques.
• Experience in REST and third-party API integrations.
• Familiarity with secure software development practices.
• Exposure to DevOps practices.
• Exposure to collaborating tools like GitHub, JIRA, Confluence.
• Compensation and Benefits.
• Competitive base salary.
• 10 days of annual leave in the first year, growing by 1 day per year to 15 days per year.
• 5 days of business leave.
• 10 - 20% Share of commission from owner and client referral.
• Health insurance on top of standard social security.
• BOI-sponsored visa & work permit for expats.
• Work Culture.
• International work environment and culture.
• 5 work days per week with 2 days work-from-home.
• Open communication that encourages feedback and idea-sharing.
• Innovative mindset that empowers creativity and new ideas.
• Established and defined career paths.
• Monthly Celebration & Parties.
• Company Values.
• Customers & Partners First.
• Integrity & Reliability.
• Team Collaboration & Innovation.
• Proactive Ownership.
• Performance Culture: Work hard, have fun, make history.
• Send your application now!.
• Please email your updated English CV to [email protected] using the format below.
• Email Subject: Senior Software Engineer - [Your Name].
• Please introduce yourself and answer the following questions in English.
• Relocation is mandatory. Are you comfortable relocating to Thailand?
• Why is this position interesting for you?
• What experience and skills will you bring to make you successful in this position?
• What is your current salary and your expected salary range?
• When can you start?.

ทักษะ:

Windows Server, VMware, DevOps, English

ประเภทงาน:

งานประจำ

• Be accountable for the successful delivery of Microsoft Azure and M365 projects for enterprise customer including Windows server and Active Directory deployment.
• Communicate and manage senior stakeholders across multiple business lines and suppliers.
• Establish an understanding of the business, develop a deep understanding of business needs to create deployment and migration delivery plans.
• Lead and inspire teams.
• Bachelor s degree or higher in Computer science, Computer engineering, IT or other related fields.
• 5+ years experience in the field of Azure, M365 and Microsoft server implementation.
• Experience with Microsoft implementation team leading or delivery team manager.
• Troubleshooting and analytical skills.
• Good communication and collaboration skills.
• Client management skills.
• Good command of English.
• Engineering Specialist.
• Provisioning and delivery strategic and complex IaaS cloud services to Enterprise customer.
• Container service implementation.
• Backup and disaster recovery site implementation.
• IaaS cloud migration and hand-over to related team.
• Validation of Cloud services solution and architect.
• Co-operation with stakeholder and perform technical planning to ensure on-time delivery.
• At least 5 years experience on VMware Cloud platform implementation and solution design.
• Experience with vCenter, vCloud Director, VMware Tanzu, SDDC, VCF or Veeam Backup and Replication.
• Ability to take on multiple assignments.
• Ability to occasionally work or assign work during nights/weekends during critical incidents per on-call rotation or major project implementations.
• Good command of English.
• VMware VCP certification is an advantage.
• Senior Engineer; (Cloud; AWS).
• Building and operating apps on AWS using tech such as API Gateway, Lambda, RDS, Automated deployment tooling and CI/CD.
• Participate in deep architectural discussions and design exercises to create solutions built on AWS while ensuring solutions are designed.
• Migration of the server loads from on-prem to Cloud working under The direction of Migration Architect.
• Conceptualizing and architecting Cloud Migration solutions.
• Build deep relationships with senior technical individuals within customers toenable them to be Cloud advocates.
• Bachelor s degree or higher in Computer science, Computer engineering, IT or other related fields.
• Good working knowledge of AWS environment and various resources/services.
• Good working knowledge of AWS DevOps Experience.
• Good Infrastructure and server management experience.
• Preferably Knowledge of AWS Migration Hub & AWS Server Migration Services.
• Experience with private and public cloud architectures, pros/cons, and migration considerations.
• Ability to occasionally work or assign work during nights/weekends during critical incidents per on-call rotation or major project implementations.
• Good command of English.

ทักษะ:

Cloud Computing, RESTful, JSON

ประเภทงาน:

งานประจำ

• Bachelor or master s degree in computer and Telecommunication Engineering, Computer Science, IT or in a related field.
• 8 - 13 years of experience in the Computer or Telecommunication field.
• Good Knowledge on cloud computing & edge computing technology.
• Good understanding on infrastructure technic that related of TCP/IP, Switch, Router, Firewall, LBS, and DNS.
• Good understanding technic that related of IoT/M2M/MEC Network Protocols - HTTP, HTTPS, Restful, MQTT, COAP, JSON objects, API, SNMP.
• Operating System knowledge: Linux-Redhat, CenOS, Windows Server.
• Database knowledge - Mongo DB, NoSQL DB, SQL, PostgreSQL.
• Good understanding of Docker and Kubernetes operations.

ประสบการณ์:

6 ปีขึ้นไป

ทักษะ:

Oracle, Java, SQL, English

ประเภทงาน:

งานประจำ

• Be familiar with oracle technology such Oracle DB and related programming language such as java, pl/sql and linux script.
• Be advantage if you are familiar with Oracle Retail Suite or Oracle ERP.
• Create data flow/system flow/detail design to make the team clear in backlog and acceptance criteria.
• Create related documents as knowledge management for team and stakeholder.
• Co-ordinate with stakeholder (Business Team/Developer/QA/TPM/DEVOPS/Solution Architect) to solve any blocking issue in software development.
• Understand and adapt testing methodology and work with QA team to delivery software with Quality.
• Understand and adapt Agile methodology in software development.
• Understand and adapt CI/CD and be familiar with DEVOPS tools in software development.
• Work with L1/L2 support team as L3 to solve any production issues within SLA.
• Be senior team member and work with teammate to delivery software with quality. And be consultant for Jr. team member to solve some blocking problems.
• Bachelor s in Computer Science or related field.
• 6+ years in Developer/System Analyst with leadership experience.
• Proficient in Oracle Database, PL/SQL, Java, and Linux scripting. Experience with Oracle Retail Suite or Oracle ERP/Oracle Retail is a strong advantage.
• Skilled in creating data flows, system flows, and detailed design documentation to clarify requirements and acceptance criteria for the team.
• Strong coordination skills to work effectively with business teams, developers, QA, DevOps, and Solution Architects to resolve development issues and remove blockers.
• Experienced in Agile methodology.
• Ability to serve as L3 support for production issues, providing mentorship to junior team members and ensuring high-quality delivery.
• Good English proficiency.
• CP AXTRA | Lotus's
• CP AXTRA Public Company Limited.
• Nawamin Office: Buengkum, Bangkok 10230, Thailand.
• By applying for this position, you consent to the collection, use and disclosure of your personal data to us, our recruitment firms and all relevant third parties for the purpose of processing your application for this job position (or any other suitable positions within Lotus's and its subsidiaries, if any). You understand and acknowledge that your personal data will be processed in accordance with the law and our policy. .

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Data Analysis, English

ประเภทงาน:

งานประจำ

• Deep dive analysis and monitoring credit performance of new acquisition by analyzing first year default cases, trigger actions if vintage reaches critical levels. Coordinate all parties to provide mitigation steps.
• Revise underwriting standard to manage default rate within MOB12 to be acceptable ratio (products are profitable).
• Quality check when account is default in the first year. To investigate and analyze root cause of credit risk default and to recommend improving credit process.
• Summarize key findings and report it to the Team Head of Retail Credit Policy & Portfolio Management for further actions.
• Perform analysis to find opportunity on selective segment with acceptable risk level and prepare underwriting standard according to initiatives. Plan and perform A-B testing of different underwriting policies in combination with credit scoring, provide comparative study of the champion challenger approach. Closely monitor initiatives/ test programs and adjust underwriting rules if it requires.
• Plan and manage risk related change requests in the approval process, organize UAT and coordinate amongst the different stakeholders.
• Act as an expert of data interpretation, perform data investigation related to the portfolio management, help the analytics team by liaising with CRI or Datawarehouse in defining new or changed fields, data structuring and definition.
• Manage the development of the credit risk data self-service platform by drafting requirements and approving results.
• Continuously improving reporting ability by actively coming up with aspects and dimensions that are to be monitored.
• Regularly provide comprehensive and high-quality portfolio risk measurement, analysis and reporting on retail segment to Senior Managements and Committees within target dates or timelines to take the right strategic decisions on timely manners through deep-dive analysis.
• Provide recommendation according to deep dive analysis for loss mitigation.
• Support all portfolio management strategy & associated risk reward optimization initiatives across Acquisition, Account management & debt collection & recovery functions.
• Bachelor s degree or Higher in Finance & Banking, Economics, Business Administration, Engineering.
• At least total 5 years experienced in retail credit policy, portfolio monitoring, retail risk management, Finance.
• Strong computer skills required, proficiency in Excel, SAS enterprise guide, Power BI.
• Demonstrated aptitude for analytics and exceptional problem-solving skills.
• Ability to communicate complex ideas effectively - both verbally and in writing - in English.

ทักษะ:

Quality Assurance, Assurance, Data Analysis, English

ประเภทงาน:

งานประจำ

• Review Test cases, Test Instruction/Procedure and all documents, including with quality assurance and UAT. (Manual Testing 90%).
• Coordinate with users, stakeholders, related team to query testing questions and/or provide advice and direction for all testing activities on a project.
• Performs moderately complex to complex test data conditioning, functional testing, regression testing and testing validation.
• Provides specific guidance on defects to developers.
• Logs, tracks, and verifies resolution of software and specification defects.
• Executes data analysis of reference data to ensure completeness of fact data used for reporting.
• Mentoring and guiding to junior team members.
• Bachelor s degree or higher in area of Computer Science, Computer Engineering, Information Technology or related fields.
• 1-3 years' experience in IT(Quality Assurance) and Software testing or related fields.
• Solid organizational skills including attention to detail and multitasking skills.
• Experience of working within both Agile and Waterfall frameworks.
• Solid knowledge and practical experience working within the SDLC (Software Development Life Cycle) and STLC (Software Test Life Cycle), as well as standard processes and industry best practice.
• Experience in creating, executing and maintaining test cases including test plans/strategies.
• Good command of English.

ทักษะ:

Java, Scala, Product Owner

ประเภทงาน:

งานประจำ

• Design and develop business logic, frameworks, and APIs to create new features and enhance existing ones using one or more backend programming languages such as Java, Scala, Go, and NodeJS.
• Write clean, scalable, maintainable, and well-structured codes for backend applications and services.
• Deliver consistently high-quality work products with high test coverage on time as planned.
• Work closely and partner with Head of Engineering and Product Owner to size and break down requirements for new features and improvements.
• Use CI/CD tools to automate the working process in software development and deployment.
• Collaborate with team members effectively, conduct code reviews, and knowledge sharing regularly.
• Inspire team members to strive for improvement of their skills with passion in building our business platform and products.
• Manage and lead backend development team(s) to achieve the division s goals and build up a productive team culture.
• Degree in Computer Science, Computer Engineering, Information Technology, or a related field.
• At least 3 years of experience as a Senior Backend developer or similar role.
• At least 1 year of experience as Backend developer lead or similar role.
• At least 4 years of experience in software development using any programming languages such as Java, Scala, Go, and NodeJS.
• Extensive experience in using Java, Scala, Go, and NodeJS with web frameworks for building web services.
• Experience in using standard and open-source libraries as unit and integration testing tools.
• Experience in any open-source projects is a big plus.
• Strong understanding of API design, OOP, design patterns, and clean architecture.
• Strong understanding of server-side application development, and microservice architecture.
• Experience in using Messaging Queue / Kafka and event-driven architecture design.
• Experience in working with both SQL and NoSQL database technologies.
• Experience in using version control systems and source code management tools.
• Experience in using and building CI/CD pipeline and workflow.
• Experience in Docker and Kubernetes on cloud infrastructure.
• Knowledge of online security practices and protocols is a plus.
• Familiarity with Agile software development and methodology.
• Ability to see and explain the big picture of the implementation progress.
• Excellent communication and people management skills.
• Exceptional problem solving, troubleshooting, analytical and logical thinking skills.
• Strong interpersonal skills to work smoothly across functions and coach the team members.

ทักษะ:

Project Management, Quantitative Analysis, Industrial Engineering

ประเภทงาน:

งานประจำ

• Work closely with senior management team to develop initiatives on operations efficiency through innovation, process improvement and retail productivity.
• Apply deep knowledge of trend, financial data, process standard and translate into actionable insight.
• Plan and develop report/ presentation to support project for trial and roll out.
• Lead, collaborate and facilitate stakeholders across the business to ensure joined up approach and achieve targets together with process and budget owners.
• Track and updated project process on a regular basis, ensure the project is able to achieve milestone. Including develop mitigation plan for any critical issues occurred.
• 5 years+ working experience in process improvement, project management, and/or quantitative analysis.
• Experience with process improvement strategies and analytical techniques of Six Sigma, Lean, Cost saving etc.
• Experience in defining and leading multiple change programs in a dynamic environment.
• Experience as a consultant for internal or external clients is a PLUS.
• Degree in Industrial Engineering, Supply Chain, Finance, IT or related field.
• Knowledge of basic statistical techniques for hypothesis testing or prediction (Correlation, Regression, etc.).
• Skilled in process improvement, project management, and data analysis.
• Ability to use data and metrics to test theories, back up assumptions, develop business cases, complete root cause analysis and measure success.
• Ability to work independently and under pressure with a business-partnering mindset.
• Good presentation, communication and influencing skills.
• Six Sigma Green Belt certification preferred.
• CP Axtra | Lotus's
• CP Axtra Public Company Limited.
• Nawamin Office: Buengkum, Bangkok 10230, Thailand.
• By applying for this position, you consent to the collection, use and disclosure of your personal data to us, our recruitment firms and all relevant third parties for the purpose of processing your application for this job position (or any other suitable positions within Lotus's and its subsidiaries, if any). You understand and acknowledge that your personal data will be processed in accordance with the law and our policy. .

ทักษะ:

Data Analysis, Industrial Engineering, Finance

ประเภทงาน:

งานประจำ

• Insight Generation & Strategic Recommendations: Utilize deep knowledge of market trends, financial data, and process standards to generate actionable insights. Develop analysis models and provide strategic recommendations that drive business decisions and improvements in operations efficiency.
• Business Analysis & Reporting: Collaborate with senior management to analyze internal and external data sources. Develop comprehensive reports and presentations that support key initiatives and guide the business in trial projects and rollouts.
• Model Development & Data Integrity: Develop and maintain robust analytical models that support business analysis. Ensure data integrity and create best-practice reports based on thorough data analysis and visualization.
• Stakeholder Collaboration & Facilitation: Lead and facilitate collaboration across the business, ensuring alignment and engagement among stakeholders. Work closely with process and budget owners to achieve business objectives and implement strategic recommendations.
• Project Tracking & Risk Mitigation: Regularly monitor and update project progress, ensuring milestones are met. Develop and execute mitigation plans for any critical issues, ensuring the successful delivery of projects.
• Consultation & End-User Support: Provide initial consultation and tailored solutions to stakeholders based on business analysis. Occasionally develop dashboards and train end users to ensure effective use of insights and tools.
• 2-5 years+ working experience in Data Analytics, Process Improvement.
• Degree in Industrial Engineering, Supply Chain, Finance, IT or related field.
• Knowledge of basic statistical techniques for hypothesis testing or prediction (Correlation, Regression, etc.).
• Skilled in process improvement, project management, and data analysis.
• Ability to use data and metrics to test theories, back up assumptions, develop business cases, complete root cause analysis and measure success.
• Ability to work independently and under pressure with business-partnering mindset.
• Good presentation, communication and influencing skills.
• Six Sigma Green Belt certification preferred.
• CP AXTRA | Lotus's
• CP AXTRA Public Company Limited.
• Nawamin Office: Buengkum, Bangkok 10230, Thailand.
• By applying for this position, you consent to the collection, use and disclosure of your personal data to us, our recruitment firms and all relevant third parties for the purpose of processing your application for this job position (or any other suitable positions within Lotus's and its subsidiaries, if any). You understand and acknowledge that your personal data will be processed in accordance with the law and our policy. .

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Electronics, English

ประเภทงาน:

งานประจำ

• Under supervision and with assistance develop, qualify, and install test applications into manufacturing operations.
• Optimize the Test process focusing on productivity improvements to cycle time and yield.
• Debug of solutions provided by external vendors or customers based on training supplied.
• Assist with test optimization based on feedback from customers and operations partners based on a solid unstinting of the test coverage, diagnosability, reparability, firmware/diagnostics and user experience.
• Maintain with minimal supervision, the continuing performance of the Testers and participate in the OEE improvement plans, yield and test time optimization.
• Knowledge/Skills/Competencies.
• Good logical thinking and analytical skills.
• Good command of English and Thai speaking.
• Ability to work in Laem Chabang, Chonburi.
• Typical Experience.
• 0-3 years of working experience in testing and debug in both electrical and optical level.
• New graduated is welcome.
• Typical Education.
• Degree or higher in Telecommunication Engineering or Electronics Engineering.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Data Entry

ประเภทงาน:

งานประจำ

• Under supervision and with minimal assistance define, specify, qualify, install, support and optimize test process and test equipment solutions for manufacturing.
• Lead test process optimization, with a focus on productivity improvements to cycle time and yield for a specific set of equipment within an Operations value stream.
• Debug of test process and equipment solutions using design of experiments, tools, and failure analysis methodologies.
• Collaborate with Quality, Process and Equipment engineers to detect and solve product and test yield and performance issues.
• Develop improvement roadmaps for test coverage, diagnosability, reparability, test time reductions and OEE.
• Analyze and interpret data and information from yield reports and equipment logs and product diagnostics to determine sources of yield loss.
• Provide solution support to process engineers to improve detection of known defect types as part of a Process Control plan.
• Support development of test equipment integration into Manufacturing Execution Systems including yield, tester log and product parametric information.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 1 to 3 years.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Electronics, English

ประเภทงาน:

งานประจำ

• Under supervision and with assistance develop, qualify, and install test applications into manufacturing operations.
• Optimize the Test process focusing on productivity improvements to cycle time and yield.
• Debug of solutions provided by external vendors or customers based on training supplied.
• Assist with test optimization based on feedback from customers and operations partners based on a solid unstinting of the test coverage, diagnosability, reparability, firmware/diagnostics and user experience.
• Maintain with minimal supervision, the continuing performance of the Testers and participate in the OEE improvement plans, yield and test time optimization.
• Knowledge/Skills/Competencies.
• Good logical thinking and analytical skills.
• Good command of English and Thai speaking.
• Ability to work in Laem Chabang, Chonburi.
• Typical Experience.
• 0-3 years of working experience in testing and debug in both electrical and optical level.
• Welcome new graduated.
• Typical Education.
• Degree or higher in Telecommunication Engineering or Electronics Engineering.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประเภทงาน:

งานประจำ

We're committed to bringing passion and customer focus to the business. If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us! Support test engineering for sustaining products, product qualification testing process, product transfer. Test Yield monitoring and yield improvement. Root cause analysis and Failure Analysis, document known failure and distribute to production team. Lead product's team members to improve process, reduce downtime and scrap cost. We are an equal opportunity employer and value diversity at our company. ...

ทักษะ:

Research, Product Design, Python, English

ประเภทงาน:

งานประจำ

• Develop and implement technical solutions in two or more technical areas. Lead smaller projects and may coordinate other engineers including reviews of their work.
• Reviews and interprets customer documentation, conducts appropriate research, analysis and experiments with minimal direction from senior staff.
• Creates technical proposals (solution and timelines) based on requirements.
• Provide high level test hardware and software solution architecture.
• Create structural or functional test strategy and test plan to meet project goals and requirements.
• Create technical proposals with costed BOM and hours estimates.
• Create product test requirements with guidance from senior staff and collaboration with customer designers.
• Provides Technical program management for small projects.
• Develop production test strategies based on product design specification.
• Design and develop test solutions including hardware & software elements and then system integration, qualification, and installation to meet product, quality and test requirements outlined in the test plan.
• Debug of tester issues using design of experiments, tools, and failure analysis methodologies.
• Execute all validation/qualification requirements by applying statistical and common industry methods.
• Stabilization of Test Solutions for manufacturing working to optimize with process teams focusing on cycle time and yield.
• Test developers may also work with product design teams with feedback from product testability, test coverage, diagnosability, reparability, firmware/diagnostics and user experience.
• Keeping up to date with relevant industry knowledge and regulations.
• Knowledge/Skills/Competencies.
• Strong knowledge on test development (SW and Test fixtures).
• Proven strong knowledge on test programming development (Python).
• Knowledge on fixtures design, setup/integration.
• Ability to create technical proposals (solution and timelines) based on requirements.
• Ability to multitask and operate in cross functional development teams.
• Good verbal, and written communication skills in English.
• Typical Experience.
• Minimum of 5+ yrs of experience Structural or Functional Test development / support for electronic / automotive industry.
• Must have experience with disciplined operations.
• Must have experience working with and coordinating well with multiple intercompany organizations.
• Typical Education.
• Degree or higher in Electronics Engineering or equivalent.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Product Design, Data Entry

ประเภทงาน:

งานประจำ

• Works as a team member who understands/interprets technical problems and provides technical support.
• Solves assigned problems under guidance of more senior engineers.
• Help provide high level test hardware and software solution architecture.
• Review equipment data sheets and select appropriate equipment based on requirements.
• Support completion of product structural or functional specific test strategy.
• Develop production test strategies based on product design specification.
• Design and develop test solutions including hardware & software elements and then system integration, qualification, and installation to meet product, quality and test requirements outlined in the test plan.
• Debug of tester issues using design of experiments, tools, and failure analysis methodologies.
• Execute all validation/qualification requirements by applying statistical and common industry methods.
• Stabilization of Test Solutions for manufacturing working to optimize with process teams focusing on cycle time and yield.
• Test developers may also work with product design teams with feedback from product testability, test coverage, diagnosability, reparability, firmware/diagnostics and user experience.
• Keeping up to date with relevant industry knowledge and regulations.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• Entry level to 1 year.
• Typical Education.
• Bachelor's Degree.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

7 ปีขึ้นไป

ทักษะ:

Nutrition, Product Development, Project Management

ประเภทงาน:

งานประจำ

• Mainly responsible for process development and product qualifications for infant, children and adult nutrition products for Asean and South Asia manufactured at third party subcontractors and MJN plants.
• Responsible for process development, commissioning and qualification for equipment in R&D technology centers.
• Make use of internal and external technical resources, perform technical assessments, experiments and testing, implement process development from product concept, formu ...
• Prepare technical documents necessary for each phase of the development from initiation stage, process validation to post launch and handover for product maintenance after launch.
• Interactions with cross-functions include market, regional and global R&D functions of Regulatory Affairs, Product Development, Process Engineering, R&D Operations, Analytical Science, Sensory Teams, Packaging Managers, R&D Technical Centers Teams, Project Management, Quality Managers, Quality Laboratory Staff, Compliance Managers, Procurement, Finance, Supply Chain, Marketing, Suppliers, Technology Providers, Research Institutions, third-party service providers, R&D technicians/consultants/temp staff (leased).
• The experience we're looking for.
• B.S. in Engineering, such as and not limited to, Chemical Engineering, Food Engineering, Biochemical Engineering, Mechanical Engineering, or any other Engineering related course. Master s Degree is an advantage.
• At least 7 years of experience in food/pharmaceutical/beverage manufacturing industry in R&D, QA or production functions with at least 5 years of those spent working in aspects of manufacturing process, process engineering, or process development.
• At least 3 years of experience as Process Engineer operating key process technologies related to food and beverage manufacturing such as dry powder blending, powder conveying, liquid processing and spray drying; experience in any one of aseptic process and packaging, membrane filtration and separation technologies, enzymatic and hydrolysis processes is an advantage.
• Demonstrate working knowledge on key unit operations and process technologies used in food and beverage industry and its relationship to overall product functionality and quality.
• Demonstrate application of mass balance, heat transfer, process flow, process specification of one or more technology platforms.
• Applies statistical design concepts towards the execution of process studies.
• Demonstrate skill creating process flow diagrams and related engineering diagrams.
• Demonstrates understanding of technical and industry practices, manufacturing industries, relevant unit operations necessary for successful qualification of new and improved processes.
• The skills for success.
• Business Strategy, Task Execution Under Pressure, Makes strategic Business Decisions, Business Accumen, Commercial Awareness, Objective Setting, Accountability, Adaptability, Consumer Insight, Creative Direction, Consumer Needs, R&D, Product Lifecycle Management, Change Leadership, Intellectual Property, Business Partnership, Collaboration and partnership building, Collaborator, Relationship Management, Adapt to changes in technological development plans, Product vision and strategy development, Ability to challenge the status quo and propose improvement, Innovation Processes, Predictive Analytics, Digital transformation for R&D, Quality and Manufacturing.
• What we offer.
• With inclusion at the heart of everything we do, working alongside our four global Employee Resource Groups, we support our people at every step of their career journey, helping them to succeed in their own individual way.
• We invest in the wellbeing of our people through parental benefits, an Employee Assistance Program to promote mental health, and life insurance for all employees globally. We have a range of other benefits in line with the local market. Through our global share plans we offer the opportunity to save and share in Reckitt's potential future successes. For eligible roles, we also offer short-term incentives to recognise, appreciate and reward your work for delivering outstanding results. You will be rewarded in line with Reckitt's pay for performance philosophy.
• Equality.
• We recognise that in real life, great people don't always 'tick all the boxes'. That's why we hire for potential as well as experience. Even if you don't meet every point on the job description, if this role and our company feels like a good fit for you, we still want to hear from you.
• All qualified applicants will receive consideration for employment without regard to age, disability or medical condition; colour, ethnicity, race, citizenship, and national origin; religion, faith; pregnancy, family status and caring responsibilities; sexual orientation; sex, gender identity, gender expression, and transgender identity; protected veteran status; size or any other basis protected by appropriate law.

ทักษะ:

Compliance, Assembly, Purchasing, English

ประเภทงาน:

งานประจำ

• Specialist in plastic component and associated tool / mould: specifying, implementing, and qualifying the tool & manufacturing process in compliance with Schneider Performance System principles.
• Ensure the pourability and manufacturability of plastic components used in the assembly or fabricated process. Design choices based on industrial and technological capabilities to meet customers and Schneiders requirements (quality / delivery / cost).
• For new offer, ensures the manufacturability of the plastic component and tool. For ...
• Select, validate, introduce, and standardize new technologies/processes locally in plastic components domain.
• Define needs of new tool (renewal, capacity, productivity, localization) each year and review quarterly.
• Launch tools with technical and financial study then follow up according to the needs and schedule.
• Continuously monitor execution of projects,.
• Buy off tools, keep all related document and establish maintenance plan.
• Follow tool condition and perform tooling appraisal periodically with follow up actions.
• Maintain & manage tooling database via Vendor Tooling Management system.
• Support CS&Q, SCM, Production, Technical and Purchasing team for tooling aspects.
• Provide technical support to the factories.
• Ensure the robustness of our parts and tooling developed.
• Bachelor's degree in Tooling, Manufacturing, Mechanical Engineering, or related field or equivalent.
• 5 years or above experience in Molding / tooling industry in international manufacturing company.
• Tools/Molds management skills, Tooling issue solving skill, Tools/Molds structure, Stamping/Plastic/Die Casting process,.
• Material selection, Engineering drawing (ISO8015).
• Good command in Thai and English.
• Location: Bangpoo Industrial Estate, Samutprakarn, Thailand.
• Primary Location: TH-11-Samut Prakan.
• Schedule: Full-time Unposting Date: Ongoing

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Java, MongoDB, NoSQL, English

ประเภทงาน:

งานประจำ

• You have a good understanding of Object-Oriented Programming concepts.
• You have experience working on Distributed Systems / Microservices.
• You should be able to produce clean, efficient code based on specifications.
• You will be working with an existing product.
• Knowledge of and adherence to best practices for writing maintainable code and unit-testing is a must.
• You possess analytical and problem-solving skills.
• You should be able to work independently as a contributing member in a high-paced and focused team.
• Bachelor's Degree in Computer Science or Information Technology, or equivalent experience.
• At least five years of experience writing programs in C#.NET Framework or Java.
• At least two years of experience working with MongoDB or other NoSQL databases.
• Able to learn and understand various API services.
• Self-motivated, eager to solve problems, driven to completion, and willing to work with others. We encourage pair programming and require collaboration on design, code reviews, and testing.
• A hybrid engineer, capable of designing and implementing your own code as well as reviewing, testing, and writing test automation for other engineers' code.
• Enjoys exploring new technologies and programming techniques, with a "willing to learn" attitude.
• Fluent in written and spoken English.
• This role is open for both Thai and non-Thai candidates. We can provide full VISA sponsorship if required.

ทักษะ:

node.js, Golang, Python

ประเภทงาน:

งานประจำ

• Design, develop, and maintain scalable and robust advertising systems across the stack (frontend, backend, mobile, and infrastructure).
• Build and optimize core features such as PPC models, bidding algorithms, and real-time ad delivery systems.
• Collaborate with product managers to understand advertiser needs and deliver impactful solutions.
• Experiment with new tools, frameworks, and methodologies to discover innovative advertising solutions.
• Develop intuitive dashboards and tools for advertisers using frameworks like React (Next.js) and Svelte (SvelteKit).
• Create and maintain backend services for ad targeting, campaign management, and analytics using Node.js, Golang, or Python.
• Contribute to mobile app features related to ad placements and reporting using Flutter.
• Ensure the stability and scalability of our advertising infrastructure using Kubernetes, Docker, and cloud platforms (GCP, AWS).
• Implement and uphold high-quality testing practices, including unit and integration tests for ad-related features.
• Proactively participate in code reviews, offering and receiving constructive feedback.
• Collaborate with cross-functional teams to integrate new advertising technologies effectively.
• Basic Qualifications We value skills and a willingness to learn. You should have proficiency in some of the following or be eager to learn them:Backend languages (e.g., Node.js, Golang, Elixir, Python).
• Frontend frameworks (e.g., React, Svelte).
• Mobile development tools (e.g., Flutter).
• Data pipeline for advertisement systems.
• In addition, you should:Focus on making the product successful and helping users achieve their goals, not just completing tasks.
• Have experience with Docker, Kubernetes, and cloud infrastructure (GCP, AWS).
• Be familiar with CI/CD pipelines and source control tools like GitHub.
• Understand database systems that are suitable for advertisement systems.
• Be curious, experimental, and open to learning from failure.
• Possess strong communication skills and thrive in collaborative Agile environments.
• Be self-motivated, adaptable, and team-oriented, with a strong work ethic.
• Preferred Qualifications We re especially excited if you bring:Proficiency in at least one backend language, one frontend framework, and mobile development tools.
• Experience building advertising platforms, including PPC models, bidding systems, or ad delivery networks.
• A deep understanding of ad performance metrics and optimization techniques.
• Strong system design skills, including the ability to make logical, long-term trade-offs.
• An eye for detail and a passion for creating user-centric advertising tools.
• The ability to adapt to a fast-paced, rapidly changing environment, driven by our vision to empower advertisers and businesses alike.
• Perks & Benefits Flat Structure As we continue to grow fast, we strive to retain our culture where everyone is heard, contributes, and grows with the company..
• Work-life Harmony We believe that quality time outside of work is important to sustaining a healthy and happy lifestyle.
• Remote Work Hybrid-mode activated! It comes with the package: flexibility, focus and productivity!.
• Urban Office One breath from Phrom Phong BTS. No sweat whatsoever! The office should also feel like a second home so we dedicated a lot of care and resources into building the best environment for you to wake up to every morning.
• Fun Workshop The best relationships are built over new experiences, that s why we have workshops filled with a range of activities for you to look forward to and enjoy.
• Game Tournament It s getting fun and competitive! Challenge doesn t only have to come from work. Own the championship and show the peeps how great of a gamer (and player) you are.
• Group Insurance Health comes first, we know, don t worry, we ve got you covered.
• Health & Wellness Only a healthy army wins the war. We invest to take care of you from physical, mental and happiness-level. Adopted health & wellness applications plus activities to make sure everyone here is on cloud nine