เงื่อนไขการค้นหา

ทักษะ:

Research, Product Design, English

ประเภทงาน:

งานประจำ

• Develop and implement technical solutions in two or more technical areas. Lead smaller projects and may coordinate other engineers including reviews of their work.
• Reviews and interprets customer documentation, conducts appropriate research, analysis and experiments with minimal direction from senior staff.
• Creates technical proposals (solution and timelines) based on requirements.
• Provide high level test hardware and software solution architecture.
• Create structural or functional test strategy and test plan to meet project goals and requirements.
• Create technical proposals with costed BOM and hours estimates.
• Create product test requirements with guidance from senior staff and collaboration with customer designers.
• Provides Technical program management for small projects.
• Develop production test strategies based on product design specification.
• Design and develop test solutions including hardware & software elements and then system integration, qualification, and installation to meet product, quality and test requirements outlined in the test plan.
• Debug of tester issues using design of experiments, tools, and failure analysis methodologies.
• Execute all validation/qualification requirements by applying statistical and common industry methods.
• Stabilization of Test Solutions for manufacturing working to optimize with process teams focusing on cycle time and yield.
• Test developers may also work with product design teams with feedback from product testability, test coverage, diagnosability, reparability, firmware/diagnostics and user experience.
• Keeping up to date with relevant industry knowledge and regulations.
• Knowledge/Skills/Competencies.
• DIGITAL/LOGIC: Familiarity of EE-Embedded such as FPGA, DSP and Microcontroller 8-bit, 32-bit ARM Cortex, Familiarity of communications protocols such as RS-232, UART, SPI, I2C, USB and PCIE Gen 3 and higher,.
• Knowledge of Timming diagram of Digital signal analysis.
• POWER: EE-POWER Switching power supplies, Familiarity of Power efficiency in AC-DC converter, EE-POINT of Load Supplies, Power Integrity-CoreSim.
• PCB/LAYOUT: Signal Integrity, Power Integrity, Tolerance Analysis, Cadence, Mentor Xpedition, Mentor PADS, Altium Designer, Other Layout tools (Preferably Altium Designer), Print Circuit Board Fabrication.
• SCHEMATIC DESIGN/SIGNAL INTEGRITY: EE-Digital, EE-Analog, Tolerance Analysis, Static Timing, Schematic Modeling.
• ANALOG: EE-Analog, Tolerance Analysis, Mixed signals of digital and Analog, Grounding balance of multiple systems.
• RF: RF Design(20Ghz).
• Typical Experience.
• Minimum of 5+ yrs of experience Structural and Functional Test development / support for electronic / automotive industry.
• Strong knowledge on test development (SW and Test fixtures).
• Proven strong knowledge on test programming development.
• Familiarity with Altium Designer and PCB fabrication.
• Knowledge on fixtures design, setup/integration.
• Good verbal, and written communication skills in English.
• Must have experience with disciplined operations.
• Must have experience working with and coordinating well with multiple intercompany organizations.
• Typical Education.
• Degree or higher in Electronics Engineering or equivalent.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Research, Linux, Data Entry

ประเภทงาน:

งานประจำ

• Design and develop technical solutions without assistance in a limited number of technical fields supporting common segments/technologies. May also solve complex problems in cooperation with a team of other engineers.
• Attend and interact in technical customer meetings.
• Research systems ideas and will draw up plans for these systems.
• Design, modify and implement systems that meet customer and Celestica needs.
• Create designs in line with Celesticas procedures, regulations and customer standards.
• Keep up to date with relevant industry knowledge and regulations.
• Solve complex problems.
• Design hardware circuit by using Allegro Cadence Concept HDL tool.
• BOM / ECO /DVN Management.
• Support Hardware bring up in NPI phase and validation of Networking, Storage, and Server products per Design Test Plan.
• Qualify alternative components for compatibility, cost-effectiveness and benchmarking.
• Work with cross-function teams to identify root cause of the design issue.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Familiar with electrical design tools such as Cadence, OrCad.
• Knowledge in Analog circuit design and Digital circuit design ( low speed and high speed ).
• Hands-on lab debugging and troubleshooting.
• Knowledge of Network switch product, x86 or ARM platform.
• Knowledge of BOM structure and Engineering change process.
• Knowledge of Linux command.
• Self-motivated with a strong multidisciplinary background.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 3 to 5 years of related experienc;Experience in similar job roles.
• Typical Education.
• Bachelors Degree in Electronic Engineering or equivalent.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Assembly, English

ประเภทงาน:

งานประจำ

• Take ownership for Environmental, Health and Safety (EHS) issues on site for the company s undertaking.
• Lead and coordinate erection and assembly activities in accordance with time schedule and cost estimate.
• Coordinate erection/assembly activities in accordance with valid instructions, check lists, specifications and regulations.
• Reports technical investigations (non-conformance reports).
• Participate in order specific reviews for larger project.
• Reports or updates on product related faults and improvements and gives feedback to product line responsible.
• Supervision and co-ordination of consultants, contractors, and customer staff.
• Keep availability of all training courses and certificates e.g. LOTO, Electrical Safety at Work, H2S, Confined spaces, Hot work and First aid.
• be available for field service assignments.
• follow established safe work methods and ensure that the work is carried out in accordance with valid EHS regulations.
• always act as an ambassador within Siemens Energy. Always collaborate and communicate with our internal customers.
• collaborate with foreign colleagues, third party and customer personnel in a respectful and professional manner.
• practice Siemens ownership culture and take responsibility for a task or a fault until it is addressed accordingly.
• What You Bring.
• Bachelor s degree in mechanical engineering, Aerospace Engineering, Marine Engineering or any related field.
• Minimum 5 years working experience in gas turbine or related engineering field.
• Ability to handle pressure and have service mind.
• Communication and problem-solving skills.
• Good command of English both written & spoken skills and proficient in MS Office.
• Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet.
• Who is Siemens Energy?.
• At Siemens Energy, we are more than just an energy technology company. We meet the growing energy demand across 90+ countries while ensuring our climate is protected. With more than 94,000 dedicated employees, we not only generate electricity for over 16% of the global community, but we re also using our technology to help protect people and the environment.
• Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.
• Find out how you can make a difference at Siemens Energy: https://www.siemens-energy.com/employeevideo.
• Our Commitment to Diversity.
• Lucky for us, we are not all the same. Through diversity, we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character - no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences.
• https://jobs.siemens-energy.com/jobs.

ประสบการณ์:

3 ปีขึ้นไป

ประเภทงาน:

งานประจำ

• At least 0-3 years in maintenance or piping construction work.At least 0-3 years in maintenance or piping construction work.
• EDUCATION.
• Bachelor or Master degree in Mechanical Engineering.
• OTHER REQUIREMENTS.
• Having skill in technical software.
• ROLE & RESPONSIBILITY.
• To plan, organize, manage, and execute maintenance of Mechanical to ensure to obtain maximum reliability, integrity and availability of equipment and minimize impact of process operation and performance as well as the efficiency of equipment to be improved or maintained at maximum.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

English

ประเภทงาน:

งานประจำ

• Responsible for planning preventive maintenance schedules for air condition & Fire protection systems.
• Responsible for coordinating and managing vendors and suppliers to preventive maintenance and payment plans.
• 2nd Level support to Data Center Operation (FOC), on site to solve Incident and Problem management.
• 2nd Level support to engineer team all site, Data Center (TT1, TT2, MTG, BNA).
• To create & update reports and documents to comply with ISO 20k, 22k, 27k, 50k & TCOS standards.
• Review PUE, cost saving energy and report.
• Measured Efficiency air system and record annual report.
• Responsible for implementation of Mechanical such as comfort air, precision air.
• Responsible for implementation of Fire suppression such as FM200, NOVEC, CO2, Fire Sprinkler, Fire Pump, Fire alarm, and Vesda.
• Working period office time 9:00 - 18:00 and able to standby on call or onsite to work on holiday.
• Bachelor degree of Engineering, Mechanical engineering or related field.
• At Least 3 years experience in maintenance air conditioning such as comfort air, precision air, chiller air cool, water cool, pump motor: implement and support for mechanics-air condition systems in buildings or Data Centers.
• At least 1 years experience in designing air conditioners such as comfort air, precision air, chiller air cool, water cool, pump motor: implement, and support for mechanics-air condition systems in building.
• Able to Air - Diagram and Psychrometric chart knowledge.
• Able to work as a team and work in and standby on call on holiday.
• Able to work overtime if required and a hotline arrives (Less than 1 hour on site from your home).
• Proficiency in English communication is beneficial.
• Work Location: TrueIDC - Bangna Site (KM26).

ทักษะ:

Compliance, Assembly, Purchasing, English

ประเภทงาน:

งานประจำ

• Specialist in plastic component and associated tool / mould: specifying, implementing, and qualifying the tool & manufacturing process in compliance with Schneider Performance System principles.
• Ensure the pourability and manufacturability of plastic components used in the assembly or fabricated process. Design choices based on industrial and technological capabilities to meet customers and Schneiders requirements (quality / delivery / cost).
• For new offer, ensures the manufacturability of the plastic component and tool. For ...
• Select, validate, introduce, and standardize new technologies/processes locally in plastic components domain.
• Define needs of new tool (renewal, capacity, productivity, localization) each year and review quarterly.
• Launch tools with technical and financial study then follow up according to the needs and schedule.
• Continuously monitor execution of projects,.
• Buy off tools, keep all related document and establish maintenance plan.
• Follow tool condition and perform tooling appraisal periodically with follow up actions.
• Maintain & manage tooling database via Vendor Tooling Management system.
• Support CS&Q, SCM, Production, Technical and Purchasing team for tooling aspects.
• Provide technical support to the factories.
• Ensure the robustness of our parts and tooling developed.
• Bachelor's degree in Tooling, Manufacturing, Mechanical Engineering, or related field or equivalent.
• 5 years or above experience in Molding / tooling industry in international manufacturing company.
• Tools/Molds management skills, Tooling issue solving skill, Tools/Molds structure, Stamping/Plastic/Die Casting process,.
• Material selection, Engineering drawing (ISO8015).
• Good command in Thai and English.
• Location: Bangpoo Industrial Estate, Samutprakarn, Thailand.
• Primary Location: TH-11-Samut Prakan.
• Schedule: Full-time Unposting Date: Ongoing

ทักษะ:

Project Management, Problem Solving, Assembly, English

ประเภทงาน:

งานประจำ

• Review process, product and identify the new technology, new component, new process. Then provide a solution and development for the new component/ new process/ new technology for PCBA..
• Project management for the development and key contact for customers and internal communication..
• Work closely with the design team, customers, supplier, and CTH internal team..
• Centralize for chemical qualification across the site..
• Work with CFT and customer on NPI development, process validation with FA lab technique to make successful transfer from NPI to mass production..
• Work with CFT on problem solving, root cause analysis to improve quality yield and prevent in field failure..
• Provide the technical consultant / FA lab result to CFT and customer for process/ material issue / Reliability.
• Knowledge/Skills/Competencies.
• Knowledge in NPI, new product, new process and new component qualification..
• Skilled in lab analysis and able to interpret the result link to PCBA and/or material issues..
• Good leadership and self-motivation.
• Fluent in English and communicate well..
• Typical Experience.
• 7-10 years of work experience in PCBA manufacturing with good knowledge of SMT, wave soldering, pressfit and mechanical assembly..
• Typical Education.
• Bachelor degree or Master degree in Material engineer, Chemical Engineer or Mechanical Engineer.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Assembly, Excel, Compliance

ประเภทงาน:

งานประจำ

• Quality Issue Resolution: Address body assembly quality issues using effective problem-solving methods and quality control (QC) tools.
• New Model Development: Support the development of new models by ensuring precision in body dimensions and production processes.
• 3D Drawing Proficiency: Read and create 3D drawings to facilitate design changes and improvements.
• Process Improvement: Enhance production processes to boost efficiency and quality in body assembly.
• Defect Investigation: Investigate defects and implement solutions to achieve quality targets (DPHU).
• Cross-Functional Collaboration: Work with cross-functional teams from R&D, production, and suppliers to meet project objectives.
• Data Tracking and Reporting: Track and report key quality data using Microsoft Excel, and present findings using PowerPoint.
• Technical Support: Provide technical assistance to the production team to uphold high standards in body assembly.
• Continuous Improvement: Participate in Kaizen activities to foster ongoing improvements in body assembly.
• Safety and Compliance: Adhere to safety, quality, and environmental regulations in all tasks.
• Qualifications Bachelor's degree in Mechanical Engineering, Mechatronic Engineering, Automotive Engineering, or a related field.
• Strong problem-solving skills with experience in using QC tools.
• QC Tools Knowledge: Familiarity with QC tools such as Fishbone diagrams, Pareto charts, 5 Whys, Fault Tree Analysis (FTA), root cause analysis.
• Proficient in reading and creating 3D drawings using AutoCAD, CATIA, or similar software.
• Skilled in Microsoft Excel for data analysis and PowerPoint for presentations.
• Able to communicate, discuss, and present in English (TOEIC score of 550 or higher).
• Strong collaboration skills and the ability to work effectively with various departments.
• Excellent interpersonal relations, positive attitude, punctuality, responsibility, and the ability to work under high pressure.
• Logical thinking, analytical skills, problem solving skills & decision making, proactive approach to challenges and learn new things.
• If you are interested in this job role, please prepare your updated resume or LinkedIn profile for the application process through the Nissan Job Portal.
• Only shortlisted candidate will be contacted for an interview".
• For more information about Nissan's products, services, and commitment to sustainable mobility, visit nissan-global.com. You can also follow us on Facebook, Instagram, X and LinkedIn and see all our latest videos on YouTube.
• Why Nissan?.
• You will definitely get the right answers why you should join us through watching the video on YouTube.
• Samut Prakan Thailand

ประสบการณ์:

7 ปีขึ้นไป

ทักษะ:

Contracts, Procurement, AutoCAD

ประเภทงาน:

งานประจำ

• Maintain and assure the asset integrity, maintenance and inspection for subsea facilities, topside structure, and equipment by professional execution of subsea work as planned with best practice implementation.
• Support lead Subsea Engineer to prepare, negotiate, manage and execute all subsea Contracts (Service Standards, Competencies, Quality, SSHE, Costs and Audits).
• Create, update, and implement a Structural Integrity Management and Risk Base Inspection (SIM-RBI) program acceptable to Company and DMF in order to reduce and optimize ...
• Create, update, and implement a Pipeline External Integrity Management and Risk Base External Inspection (RBEI) program acceptable to Company and DMF in order to reduce and optimize all costs.
• Manage, update the database of SIM-RBI study reports, subsea inspection report, subsea anomaly list and dashboard.
• Review the technical dossier of any new contractors asking to be pre-qualified.
• Manage and execute all offshore operations on the vessels as a Superintendent, Offshore Manager and/or Company Site Representative.
• Supervise the cost control of the intervention of subsea works and participate in budget preparation.
• Ensure that all works are conducted along the recommendations of the IMCA.
• Design, fabricate and test specific ROV or diving tool. Conduct the relevant audits on vessels, ROV and diving systems.
• Keep up to date on new regulations in the ROV and diving industry as well as cost saving and new technologies.
• Execute subsea maintenance and inspection campaign using ROV, saturation, air diving and any other new technologies.
• Prepare short and long term planning of routine inspection programs. Evaluate and demonstrate that subsea inspection program is done in a cost-effective manner.
• Key Accountabilities (Continued).
• Prepare and conduct the offshore campaigns.
• Report on findings and issue all relevant work orders for corrective action.
• Maintain the Underwater Inspection Database of all anomalies, repairs and modifications.
• Prepare and process the procurement for the routine and specific contracts of subsea inspection.
• Technically assist asset in the engineering analysis of damages of incidents.
• Provide recommendation on mitigation plan for reported anomalies/damages/ incidents and follow up with concerned parties to close out all the needed actions.
• Design and update the EPRS philosophy, identify the possible worst case scenarios and their corrective actions.
• Identify the needed equipment, materials and specialized tools.
• Prepare budget, stock and maintenance of all purchased EPRS items.
• Locate, contract and mobilize the marine spread for initial inspection at the best cost.
• Participate in the establishment/review of related procedures.
• Participate in the technical review as well as the operability/security audits.
• Promote the implementation of company s SSHE policy and regulations in all works under responsibility.
• Professional Knowledge & Experiences.
• Bachelor s degree in any field with a preference in Subsea, Civil, Mechanical or Offshore Engineering.
• A minimum of 7 years working experience.
• A minimum of 5 years working in the offshore and/or Oil and Gas industry with a cumulated offshore time of no less than 2 years.
• Possess AutoCAD skills and full computer proficiency.
• Capable of drafting the specific contractual clauses in an ROV and/or diving contract.
• Well up to date and connected with all known Sub Sea contractors and vendors, capable of selecting the right marine spread and equipment for each specific operation. Keep up to date on the pre-qualification program of Contractors.
• Fully conversant on all Sub Sea inspection and NDE techniques, tools and equipment.
• Fully competent on all EPRS equipment and tools.
• Fully conversant on all ROV and diving techniques, rules and regulation and the IMCA.
• Have prepared, organized and conducted alone a minimum of 2 full routine inspection campaigns.

ประสบการณ์:

2 ปีขึ้นไป

ทักษะ:

Production Engineering, Electrical Engineering, Problem Solving

ประเภทงาน:

งานประจำ

• Design & Innovate: Develop and enhance the processes and facilities of our production line for both current and new models.
• Collaborate & Coordinate: Work closely with production, maintenance, quality, and safety teams to support project implementation and ensure seamless operations.
• Global Engagement: Oversee and collaborate with our international production plants, focusing on benchmarking best practices, introducing new models, and driving continuous improvement through Kaizen methodologies.
• Qualifications to consider: Bachelor's degree in Mechanical / Industrial / Automotive / Electrical Engineering or related field.
• 2 years experience in Automotive business or New graduated are welcome.
• Experience in production / manufacturing engineering, preferably in the automotive industry.
• Strong Logical thinking, analytical skills, problem solving skills & decision making.
• Able to communicate, discuss, and present in English (TOEIC score of 550 or higher).
• Proactive approach to challenges and learn new things.
• Strong interpersonal skills, positive attitude, punctuality, and the ability to work under high pressure.
• If you are interested in this job role, please prepare your updated resume or LinkedIn profile for the application process through the Nissan Job Portal.
• Only shortlisted candidate will be contacted for an interview".
• For more information about Nissan's products, services, and commitment to sustainable mobility, visit nissan-global.com. You can also follow us on Facebook, Instagram, X and LinkedIn and see all our latest videos on YouTube.
• Why Nissan?.
• You will definitely get the right answers why you should join us through watching the video on YouTube.
• Samut Prakan Thailand

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Assembly, CAD

ประเภทงาน:

งานประจำ

• Supervise Technician to support company goals.
• WI, Control plan, PFMEA and FA documents support.
• Continuous process improvement activities utilizing wide variety of analytical techniques (such as SPC, DOE, Gauge R&R), lean manufacturing and six sigma concepts.
• Leader in Product quality improvement, DFM, DFA, Engineering Evaluation.
• Process out control for problem solving.
• Evaluation of new material or component part use in production.
• Evaluation and develop Process and new Technology.
• Overseas travel is required, ~30% work load.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Typical Experience.
• 3+ years Experience in die bonding, flip chip attach, glob top, underfill, and die attach process development.
• Work Experience and understand in optoelectronics assembly, microelectronics assembly.
• Strong Knowledge of transceiver, modulator is an advantage.
• Hands-on experience in machine set-up and operation for die bonders (DataCon, MRSI, Finetech, Amicra) is an advantage.
• Proficient in root cause and failure mode Analysis.
• Familiar with cleanroom and ESD protocols.
• Knowledge of Auto CAD 2D, 3D or Solid work program.
• Excellent interpersonal skills and demonstrated communication skills.
• Self-motivated, proactive and innovative problem-solving capabilities, Management skill and Presentation skill.
• Typical Education.
• Bachelor or Master degree in Mechanical, Mechatronic, Electronics or relates Engineering degree.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Project Management, Financial Reporting, Accounting

ประเภทงาน:

งานประจำ

• Responsible for understanding and implementing the customers technical roadmap and related process development projects.
• Lead and implement the development and release of the full manufacturing process for new customer products.
• Understand and provide feedback on customers technical requirements to team members and management.
• Responsible for developing and implementing costed and optimized feedback using Design for manufacturability (DFX) tools and processes, with the goal of reducing manufacturing cost and improving quality and reliability of product.
• Develop, plan and lead the assessment of the capability of process applications using Design of Experiments.
• Devise process controls and data collection strategies and evaluate complex data to assist with reporting yield, reliability and diagnoses to root causes failures impacting product quality.
• Ensure accurate and timely communication to management on critical technical and business issues.
• Set yearly plans and goals for the department and give direction on expected performance and provide regular performance evaluations and ongoing feedback. Accountable for all department objectives and achieving agreed targets for key performance indicators.
• Knowledge/Skills/Competencies.
• Project Management - Ability to manage/lead complex, multiple line engineering projects that may also involve other functions. Demonstrate solid understanding of the technical, financial and people aspects of the project. Able to create a project/change management plan and ensure that the project is delivered within the assigned time and budget. Ability to recognize project barriers and develop mitigation plans.
• Leadership - Demonstrate "People & Team Leadership Behaviors" as per Celestica Leadership Imperatives.
• Financial Acumen / Business Planning - Ability to create financial plans for your projects, align them internally with your line of management and other functions and externally if needed. Create project plans, profitability calculations, risk and sensitivity analysis, able to recognize barriers and mitigate profitability risks. Fully knowledgeable about internal and external financial reporting, accounting and tax requirements relevant to your area of expertise.
• The following competencies may also be required: Coaching/Mentoring; Communication/Negotiation/Presentation; Creative Problem Solving; Customer Interaction/Stakeholder Management; Quality & Lean; Working Effectively with Others; D/PFMEA; 8D/Corrective Action; Equipment Safety; Design of Experiments (DOE).
• Typical Experience.
• 10+ years of work experience in PCB assembly manufacturing field.
• Typical Education.
• Degree or higher in Mechanical/Chemical/Electrical Engineering or equivalent.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

8 ปีขึ้นไป

ทักษะ:

Project Management, Industrial Engineering, English

ประเภทงาน:

งานประจำ

• Bachelor's degree in a technical field, or equivalent practical experience.
• 8 years of experience in program management.
• Experience with technical teams, project management, engineering, and construction of data centers or mission facilities.
• Experience with data center equipment/environments (e.g., civil/structural, electrical switchgear, generators, chillers, security monitoring).
• Ability to communicate in Thai and English fluently to support vendor and contractor management in this region.
• Preferred qualifications:Master's degree in Architectural, Electrical, Mechanical or Industrial Engineering, Construction Management, or related technical field.
• Certification in Construction manager, Project Management Professional (PMP), registered architect, etc.
• 10 years of experience managing multi-group/disciplinary construction projects with civil, architectural, electrical, mechanical, controls, security monitoring, fire safety, networking/fiber, server equipment, systems, and infrastructure.
• Experience in requirements gathering, resource organization, task prioritization, and scheduling and achieving objectives within set goals.
• Experience managing vendor relationships and an understanding of standard practices in the design and construction industry, and pursuit of industry leading practices.
• Knowledge of fast track design build processes.
• Google's projects, like our users, span the globe and require managers to keep the big picture in focus while being able to dive into the unique engineering challenges we face daily. As a Technical Program Manager at Google, you lead complex, multi-disciplinary engineering projects using your engineering expertise. You plan requirements with internal customers and usher projects through the entire project lifecycle. This includes managing project schedules, identifying risks and clearly communicating them to project stakeholders. You're equally at home explaining your team's analyses and recommendations to executives as you are discussing the technical trade-offs in product development with engineers.Using your extensive technical and leadership expertise, you manage projects of various size and scope, identifying future opportunities, improving processes and driving the technical directions of your programs.
• Behind everything our users see online is the architecture built by the Technical Infrastructure team to keep it running. From developing and maintaining our data centers to building the next generation of Google platforms, we make Google's product portfolio possible. We're proud to be our engineers' engineers and love voiding warranties by taking things apart so we can rebuild them. We keep our networks up and running, ensuring our users have the best and fastest experience possible.
• ResponsibilitiesProvide management of data centers at multiple scales.
• Manage and coordinate the needs of multiple partner teams, while managing changes and maintaining a focus on keeping the project on schedule, budget, quality, and safety.
• Manage technical projects in a rapidly changing industry.
• Deliver data center facility from start to commissioning and understand the nuances and risks that will need to be managed.
• Google is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. We also consider qualified applicants regardless of criminal histories, consistent with legal requirements. See alsoGoogle's EEO Policy andEEO is the Law. If you have a disability or special need that requires accommodation, please let us know by completing ourAccommodations for Applicants form.

ประสบการณ์:

2 ปีขึ้นไป

ทักษะ:

Market Research, Research, Business Development, English

ประเภทงาน:

งานประจำ

• Work closely across industries with client business team.
• Review and evaluate current state of Supply Chain and Operations by using a robust set of data analytics and assessment tools.
• Identify gaps in client operations and recommend resolutions for further improvements.
• Design deliverables content to reflect client needs and strive to develop deliverable quality through verification and validation of results.
• Manage engagement to ensure the project is on track and all milestones are met under supervision from project manager, and report to client s top management.
• Conduct market research, feasibility study, and business development.
• Support project manager/ team leader in executing projects and other tasks.
• Thai nationality only.
• Bachelor or Master of Engineering (Industrial, Mechanical, or Production), BBA, or Supply Chain related.
• 0 - 2 years of professional experience with at least one of the following areas: Sales and Operations Planning, Procurement, Manufacturing, or Distribution. New Graduated are also welcome!.
• Preferably consulting professional experience either through internship or past professional background.
• Hardworking, self-motivated individual, and team player with excellent interpersonal skills.
• Strong analytical, problem solving, and managerial skills.
• Able to work under pressure, aggressive timeframe, and consulting lifestyle.
• Very good Thai and English communication skills.
• Preferably Lean Operations experience, Six Sigma educated, and/or TPS practiced.
• Equipped with MS office, and capable of analysis applications is advantageous.
• Preferably experience in VBA.
• Ability to travel to upcountry or abroad is required.
• If you are looking for a challenging job with dynamic fast-paced environment, we invite you joining our hands and building a better working world!.

ทักษะ:

Data Entry

ประเภทงาน:

งานประจำ

• Develop and implement new manufacturing applications to support customer products.
• Focus on developing application software and tooling for a complex machine or a series of several simpler, mechanical process steps.
• Define process problems that lead to throughput or quality issues, evaluate cause of problem, and implement solutions to stabilize processes.
• Support the evaluation of new equipment, coordinate software and hardware upgrades, set equipment specifications and qualification tests with supervision.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• Entry level to 1 year.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Assurance, Cost Estimation, Mechanical Engineering, English

ประเภทงาน:

งานประจำ

• Provide technical support, technical assurance and consultation on power and renewables project, with regards to engineering discipline, including engineering study and evaluation (feasibility study, conceptual engineering design, basic and detailed, engineering) engineering cost estimation, problem analysis, field troubleshooting, project acquisition due diligence as well as implementation of new technologies.
• Review, evaluate and recommend development concepts, facility design and decommissioning.
• Study, analyse, review, and recommend construction options and solutions to the process that will enhance/ optimize operations at minimum costs and with proper safety considerations. Determine effect of such construction on the process and report the findings and feasibility.
• Ensure work quality to be aligned with engineering standard, policy, procedures and guidelines.
• Work in close coordination with Project Team in developing and reviewing the project s work plan and scheduling. Carry out technical and economic justification of the proposed work plan and budgets as well as provide comments and recommendation for approval.
• Monitor project performance, progress, and expenditure by reviewing the operation activities report and statement of expenditure to achieve the project s objectives.
• Participate in commercial & financial, and technical meetings in order to obtain all necessary information, problems or obstacles for further study and analysis in terms of project return and value added and follow up the project s achievement and improvement.
• Integrate the overall of project work plan to minimize production loss and shutdown time of operation.
• Generate monitoring and following report to ensure required project deliverable and performance.
• Manage engineers, contractors, vendors, and all stakeholders to execute projects and ensure that the projects performance in terms of technical quality, work progress, and cost control are aligned with the defined strategies and approved plans.
• Prepare bidding package for construction, operations and maintenance, project material/ equipment, and others as per project requirements.
• Professional Knowledge & Experiences.
• Bachelor s Degree or higher in Electrical Engineering or Mechanical Engineering or related fields (Preferable Master s Degree in Energy/ Renewables related).
• Minimum 10 years experience in Power and Renewables Engineering.
• Experiences in Project Development, Project Management and/ or M&A is preferable.
• Has strongly knowledge in the engineering/ design, especially the electrical equipment, generators (including gas turbines, solar panal, and wind turbines), transformers, switchgear, motor control centers, uninterruptible power supply, DC chargers, batteries, variable frequency drives, motors, solar and wind power generation, explosion proof equipment, cables, and electrical control system, interface requirements, specifications, codes & standards.
• Good command of both written and spoken English.
• Ability to use engineering detailed design and analysis software such as Smart Plant Electrical and ETAP.
• Good communication, interpersonal and presentation skills.
• Additional Desirable Qualification.
• CORE Competencies.

ทักษะ:

Mechanical Engineering

ประเภทงาน:

งานประจำ

• Responsible for understanding the customer s technical roadmap and identifying and managing all new customer-specific process development projects.
• Manage technical aspects for all new customer-specific process development projects.
• Develop the scope of all technical work, coordinate the team, direct work assignments and assist with problem resolution for the full customer product life cycle support for all manufacturing technical issues related to the customer s product(s) from product conception to product obsolescence.
• Evaluate potential manufacturing impact for each design concept.
• Responsible for the best practice standard development, participate in Industry organizations for developing the standards and provide training and application support globally.
• Set yearly plans and goals for their department and give direction on expected performance and provide regular performance evaluations and ongoing feedback. Accountable for all department objectives and achieving agreed targets for key performance indicators.
• Defines process problems that lead to throughput or quality issues, evaluates cause of problem, implements solutions to stabilize processes, evaluates results.
• Acts as the focal point for all product-related technical issues.
• Interacts with customers to resolve problems and increase the quality and yield of the product and/or the product data release process.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Typical Experience.
• 7-10 years of working experience in new project and engineering management.
• Typical Education.
• Bachelor s Degree in Mechanical Engineering or related fields.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Contracts, Compliance, Procurement, English

ประเภทงาน:

งานประจำ

• Plan and develop operational programs, procedures and schedules assuring technical and cost justification with SSHE consideration.
• Design well intervention in accordance with requirements from Assets; and with regard of well integrity.
• Contribute to preparation of budget and the Authorization for Expenditure (AFE) including follow-up and control of expenditures.
• Coordinate with Workshop function in preparation of subassemblies, equipment and tools required for all related operations.
• Coordinate with Superintendent/Supervisor, Well Operations and contractors to ensure preventive maintenance of operating units/equipment is properly carried out as per agreed schedule.
• Coordinate with Superintendent/Supervisor, Well Operations during preparation of operations and execution phase.
• Manage and control the operations, and establish logistical needs in collaboration with concerned personnel/parties.
• Serve as Contract Holder to initiate bidding and/or negotiating for third party services as well as prepare and manage drilling contracts in compliance with Company's Procurement Process and SSHE Contractor Management Standard.
• Assist, advice, and support concerned parties on technical/operational aspects regarding to solve the problems and avoid delays in work schedule.
• Prepare end of well reports and capture lessons learnt at the end of the campaign or after troubleshooting for operations improvement.
• Supervise, coach and mentor the junior engineers on technical and operational issues.
• Review technical analysis/justification of recommendation to ensure proper engineering design and operation execution.
• Ensure compliance with all applicable legal and company s SSHE MS requirements in all work under responsibility.
• Professional Knowledge & Experiences.
• Bachelor s Degree of Engineering in Process/Petroleum/Mechanical or education certificate with 5-10-years experience in well intervention.
• Well Control certificate for Well Intervention or drilling operations.
• Knowledge of contractual terms and conditions, contracts management, detailed operational structure, decision making process, and company/industry standards and practices, well integrity, and plug and abandonment.
• Good command of written and spoken English.
• Offshore experience.
• Contract management skills.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Automation, Assembly, AutoCAD, English

ประเภทงาน:

งานประจำ

• Concept and architect automation stations and assembly lines.
• Analysis and the creation of User Requirement Specification (URS) in order to determine feasibility of using one or more machines.
• Perform engineering calculations with respect to cycle time, strength of materials, speeds, horsepower, temperature, pressure, force, etc.
• Analyze engineering drawings (mechanical and electrical) and specifications to determine if it meets process and products specifications.
• Formalize and update drawing documentation.
• Work with Celestica Global Machinery Standards.
• Liaise with vendors (local and abroad) for technical information and specifications.
• Communicate all requested design changes to various teams (within Celestica).
• Knowledge of AutoCAD and SolidWorks is an asset.
• Understanding of machinery safety and safety devices.
• Understanding of the use of pneumatics and hydraulics.
• Understanding of the use of electrical and motion devices (i.e. servo, VFDs, switches, load cells, etc.).
• Experience with robotic programming is an asset.
• An understanding of machine vision (2D, 3D and machine learning) as it applied to automation stations for identification, quality, robotic offset and alignment.
• Concept and architect automation stations and assembly lines.
• Analysis and the creation of User Requirement Specification (URS) in order to determine feasibility of using one or more machines.
• Perform engineering calculations with respect to cycle time, strength of materials, speeds, horsepower, temperature, pressure, force, etc.
• Analyze engineering drawings (mechanical and electrical) and specifications to determine if it meets process and products specifications.
• Formalize and update drawing documentation.
• Work with Celestica Global Machinery Standards.
• Liaise with vendors (local and abroad) for technical information and specifications.
• Communicate all requested design changes to various teams (within Celestica).
• Knowledge of AutoCAD and SolidWorks is an asset.
• Understanding of machinery safety and safety devices.
• Understanding of the use of pneumatics and hydraulics.
• Understanding of the use of electrical and motion devices (i.e. servo, VFDs, switches, load cells, etc.).
• Experience with robotic programming is an asset.
• An understanding of machine vision (2D, 3D and machine learning) as it applied to automation stations for identification, quality, robotic offset and alignment.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Typical Experience.
• Minimum 5 years in automation design at a machine integrator, or equivalent, designing and concepting machines from small table top to large stations.
• Basic knowledge of printed circuit board assembly/electronics manufacturing are an asset.
• Fluent in English.
• Able to work based in Laem Chabang, Chonburi, Thailand.
• Typical Education.
• Degree in Mechanical Engineering/ Electrical Control Engineering / Robotics/ Mechatronics Automation Technology or related field.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Sales, Marketing Strategy, Business Development, Laos, English

ประเภทงาน:

งานประจำ

• Responsible for Professional Installed (Project) & Commercial (Distribution) sales, coordination of all sales activities with customers to reach the sales targets of Thailand and Laos.
• Growing business through channel expansion, distribution and geographical coverage within Thailand & Laos.
• Perform market & competitor analysis and product positioning.
• Propose, design and explain a complete Installed sound system to End User, Consultants and customer.
• Develop Distribution business, channel expansion, marketing strategy online/offline for commercial sound.
• Provide technical assistant for customers to support design and tender clarification.
• Conduct presentation of Installed sound system to end user, consultant, customer and during events.
• Qualifications Bachelor s degree in Electrical, Mechanical, Electronic Engineering or other related field.
• At least 5 years sales related experience in the Prosound Industry with proven sales record.
• Experienced in Prosound Industry is an advantage.
• Experienced in project business, channel management, distribution, marketing strategy for online/offline and business development.
• In depth knowledge of local markets, channels and competitors.
• Able to work independently to achieve the sales target.
• General project sales skills in Installed sound system Project.
• Fluency in both spoken and written English.
• Additional InformationBy choice, we are committed to a diverse workforce and are an equal opportunity employer. Robert Bosch welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in the selection process.