Filter Jobs

Experience:

7 years required

Skills:

Assurance, Compliance, ISO 9001, English

Job type:

Full-time

• Provide Quality supports to PTTEP Well Engineering and Operations Division (OWO) and its departments ensuring that the Quality contractual requirements are fulfilled.
• Perform continual review of suppliers Quality Plans and Quality Control Plans to ensure that the Goods and Services to be procured with specific reference to the application severity level, are in accordance with the contract requirements.
• Perform continuous review of suppliers Quality related documentation, ex. WPS/PQR, NDT, coating, leak testing, and other agreed procedures stated in the contract to ens ...
• Coordinate third-party inspection (TPI) activities related to service contract operational bases.
• Perform audits and assessments where applicable both inside Thailand and at suppliers/contractors bases worldwide.
• Ensure all Quality records are archived and documented into a Quality database system in OWO Division.
• Assist in preparing Quality related Call for Tender (CFT) and participate in bids evaluation and contracting process.
• Key Accountabilities.
• Manage the TPI personnel on contract to PTTEP.
• Manage the OWO s Quality database system to ensure that any record required is properly archived and retrievable.
• Perform the review of suppliers Quality documentation to ensure suitability to Scope of Work/Service.
• Perform Quality technical audits and assessments.
• Lead Quality and technical meetings as necessary.
• Review supplier reports from a Quality point of view.
• Follow Up NCR reports issued by PTTEP and suppliers/contractors with respect to corrective actions presented by suppliers/contractors.
• Lead monthly contract meetings with service providers from a Quality perspective.
• Demonstrate a personal commitment to Safety, Security, Health and Environment (SSHE) by following:Thailand Statutory SSHE regulations.
• PTTEP Corporate SSHE Policy.
• Supplier s/Contractor s SSHE Management Systems.
• Key Accountabilities (Cont.).
• Interface with OWO Division and its departments in Bangkok and the Logistics Base in Songkhla for all matters concerning the Quality issues on OWO s goods, equipment, and services.
• Interface with the PTTEP Quality representatives in Songkhla, or in other locations where PTTEP equipment or services are being performed.
• Keep regular contact with goods, equipment, and service suppliers and local service providers.
• Remain competent to represent PTTEP in the presence of the regulator as required.
• Contribute to preparation of OWO QA/QC budget including follow-up and control of expenditures for the assigned contract management.
• Supervise, coach, and mentor the junior engineers on technical and operational issues related to QA/QC.
• Professional Knowledge & Experiences.
• Bachelor s degree in any engineering discipline from a recognized University.
• Hold certificate for ISO 9001 Version 2015 training (or API Q1 or Q2 training).
• Possess working knowledge in the NDT methods of Magnetic Particle Inspection, Liquid Penetrant, Ultrasonic Testing and Radiography.
• Possess working knowledge of the facilities equipment and services being purchased by PTTEP OWO Departments.
• Have minimum 7 years working in a Quality Department of any engineering/manufacturing industries (preferably in Oil & Gas business especially with practical experience in managing Quality issues on drilling, completion, and intervention equipment).
• Advantageous if with good knowledge and familiarity with the most advanced QA/QC requirements and procedures for inspection/auditing, matured in a major oil company.
• Flexible attitude to stay in operational bases, manufacturing facilities for short periods.
• Critical aptitude and the ability to analyse processes quickly, methodically, and effectively.
• PC literacy with MS Office basic applications in a Windows environment.
• Team player skills, capable of working with professionals from different partner companies.
• Fluency in English language, both verbal and written.
• Shall demonstrate attitude and experience in working in a multi-national/multi-cultural environment; and must show the sensibility and capability to understand and harmonize with people from different cultural and experience background.
• Must be aware of and commit himself/herself to the Company s Operating Instructions as far as his/her personal behaviour is concerned during all the time of his working commitment.
• Must be aware of the local working condition, both at the designated office and on-site(s), with respect to social, seasonal, and environmental constraints.

Skills:

Purchasing, Production planning, Product Development

Job type:

Full-time

• Design and implement production standards: Oversee all stages of production, from raw material preparation, production scheduling, workforce planning, production processes, to product delivery, ensuring efficiency and effectiveness.
• Manage and utilize appropriate technology: Ensure cost-effective use of technology while continuously seeking opportunities for improvement, standardization, and process development to enhance production efficiency.
• Set production operation standards: Align production practices with product quality ...
• Coordinate with various departments: Work closely with purchasing, production planning, quality control, and product development teams to achieve production goals, product quality, and delivery requirements.
• Bachelor s degree in Industrial Engineering, Food Engineering, Food Technology, or related fields.
• 5+ years of experience in production roles.
• Able to generate creative ideas, work as a team, maintain a positive attitude, and communicate effectively to build understanding.
• Capable of analyzing data, opportunities, risks, and impacts, thinking outside the box, and offering unique perspectives.
• Evaluate the feasibility of innovations, motivate the team, plan to drive innovation, lead change, and foster a culture of creative thinking and working.
• CP AXTRA | Lotus's
• CP AXTRA Public Company Limited.
• Nawamin Office: Buengkum, Bangkok 10230, Thailand.
• By applying for this position, you consent to the collection, use and disclosure of your personal data to us, our recruitment firms and all relevant third parties for the purpose of processing your application for this job position (or any other suitable positions within Lotus's and its subsidiaries, if any). You understand and acknowledge that your personal data will be processed in accordance with the law and our policy.

Skills:

Compliance, Legal

Job type:

Full-time

• Handle all quality excursions, take effective actions and follow proper escalation.
• Support and follow up the product & material quality from NPI to mass production (FAI(First Article Inspection), IP(Inspection Plan), WI(Work Instruction), etc.). This includes following industry specific protocols as required.
• Assist to create the quality control plan for respective area (material/process/product).
• Analyze, monitor and report quality KPI for internal (factory) and external (customer). à €“ RFPY (Rolled First Pass Yield)/OBA(Out of Box Audit) - RMA (Returned Material Authorization)/DPQL(Delivered Product Quality Level) - Customer feedback - LRR(Line Reject Rate)/ RI Flag(Receiving Inspection Flag)/WWQA(World Wide Quality Alert).
• Drive continuous improvement to benefit customer, CLS and supplier.
• Draft internal quality system procedures, work instructions and workmanship standards.
• Assist process/product/system/supplier audit and improvement actions follow up. - Industry standards (e.g., ISO) - Compliance audit - Safety audit etc.
• Follow up the EC (Engineering Change), SPCN (Supplier Process Change Notification) to ensure the implementation of changes is timely and accurate (initiated both externally and internally).
• Enhance the quality skills and product knowledge through the training program.
• Accomplish the jobs assignment from the superior and participate in the quality strategy deployment.
• Knowledge/Skills/Competencies.
• Knowledge of quality tools, ISO and IPC standards and processes.
• Knowledge of software as used in generating reports capturing data & presenting data in an understandable format.
• Knowledge of manufacturing processes Understand quality tools such as FMEA, PMP, SPC, 8D methodology, etc.
• Understand Six Sigma and Lean Kaizen.
• Knowledge and understanding of the business unit and how decisions impact customer satisfaction product quality,on-time delivery and profitability of the unit.
• Ability to effectively communicate with a wide variety of internal and external customers.
• Physical Demands.
• Repetitive manual movements (e.g., keyboarding).
• Sustained visual concentration on small areas, such as monitors, screens.
• Sustained visual concentration on numbers, legal documents.
• The job works in a normal office environment with no undue exposure to noise, odours, dust, drafts, etc.
• Typical Experience.
• 4 to 6 years ( 2- 4 years).
• Typical Education.
• Bachelor's Degree.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Skills:

Automation, Digital Marketing, English

Job type:

Internship

• Study to improve Lubricants Blending processes and optimize energy and plant utilities consumption.
• Study to improve blending activities by applying Lean Manufacturing such as Spaghetti diagram, plant layout and man/machine movement.
• Study to develop digital form to deploy paperless tasks.
• Analyze data of pump in blending for project improvement.
• Support TPM (Total Productive Maintenance) and CI program.
• Department - Filling.
• Study to improve filling automation machine/loss time.
• Study to develop digital form to deploy paperless tasks.
• Study to improve products quality/engineering control/visual control.
• Study to improve machine breakdown and maintenance program.
• Support TPM (Total Productive Maintenance) and CI program.
• Department - Grease.
• Study to improve Grease production processes and optimize energy and plant utilities consumption.
• Study to improve batch cycle time of grease production.
• Study to improve grease activities by applying Lean Manufacturing.
• Who we are looking?.
• 1st - 4th year student or Master's student from Engineering background (Preferred Chemical Engineer, Mechanical / Mechatronic / Robotic Engineer, Industrial Engineer).
• Fluency in English (Both written and verbal).
• Strong leadership, analytical and systematic thinking skills.
• Good communication and coordination skills.
• Lubricants.
• A chance to show your talent, bring in new initiatives and contribute to a success of this new product launch.
• Conduct market visits to understand consumer behavior, competitor landscape & strategies, pricing and category movement.
• Analyze market data and consumer feedback to identify opportunities and barriers to growth.
• Gather consumer insights to drive repeated purchase and continuous product improvement.
• Develop and implement testimonial ideas from product samplings and purchase.
• Execute marketing campaigns, launch events and various marketing activities such as product sampling, digital marketing initiatives, in-store promotions.
• Sales & Distribution Strategy:Implement and execute strategies to drive product penetration and revenue growth.
• Monitor sales performance and monthly KPIs target.
• Monitor distribution expansion according to targets.
• Build strong relationships with key stakeholders (internal and external).
• Who we are looking?.
• 1st - 4th year student or Master's student from Business related background.
• Fluency in English (Both written and verbal).
• Strong leadership, analytical and systematic thinking skills.
• Good communication and coordination skills.

Skills:

English

Job type:

Full-time

• Good command of English and computer literacy.
• Work @ Sriracha, Chonburi.
• ROLE & RESPONSIBILITY.
• Provide efficient process control, advanced process control, optimization support and new development to maximize GRM with due consideration to safe and stable operations while meeting product quality requirements.

Experience:

5 years required

Skills:

Compliance, Legal, Contracts

Job type:

Full-time

• Ensure compliance with all statutory reporting requirements, including the preparation and submission of financial statements and reports.
• Oversee the company s tax strategy, including the preparation and filing of tax returns, ensuring compliance with Thai tax laws. This further includes:Lead and manage special projects related to statutory, legal, and tax compliance.
• Site lead for tax defense.
• TP support.
• BOI initiatives.
• Manage and coordinate statutory audits, providing necessary documentation and information to auditors.
• Corporate Secretary & Corporate Legal partnering.
• Develop and implement internal controls and procedures to ensure compliance with legal and regulatory requirements.
• Monitor changes in financial regulations and tax laws, and provide guidance to senior management on their impact.
• Prepare and present reports to senior management on compliance and tax issues.
• Conduct regular reviews of the company s financial practices to identify and mitigate compliance risks. Including:Tax fillings & internal tax audit.
• Regulatory compliance reviews (registrations, licenses, permits).
• Bank signatories & regulations.
• Contracts review.
• Document financial processes and document desktop procedures for knowledge sharing and clear guidelines available for all team members are in place. Further develop and optimize this documentation, assuring the application of best practices in compliance with company s internal control framework.
• Provide training and support to finance and accounting staff on compliance and tax matters.
• Knowledge/Skills/Competencies.
• Bachelor s degree in Accounting, Finance, or related field; CPA or equivalent certification preferred.
• Minimum of 5+ years of experience in finance or accounting, with a focus on statutory reporting, legal compliance, and tax.
• Experience with a major audit firm (e.g., Big Four: Deloitte, PwC, EY, KPMG) is is highly desirable.
• Strong knowledge of financial regulations and tax laws.
• Proficiency in accounting software and Microsoft Office Suite (Excel, Word, PowerPoint).
• Analytical, problem-solving, and organizational skills.
• Attention to detail and accuracy.
• Communication and interpersonal skills.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Skills:

Project Management, Negotiation, Problem Solving

Job type:

Full-time

• Work as a team member who understands/interprets technical problems and provides technical support.
• Solve assigned problems under guidance of more senior engineers.
• Analyze, design and develop software to support the hardware validation.
• Design and develop a processing platform using various configuration management technologies.
• Provide ongoing maintenance, support and enhancements in existing systems and platforms.
• Collaborate cross-functionally with customers, users, project managers and other engineers including Peer-Reviews to achieve elegant solutions.
• Work alongside other engineers on the team to elevate technology and consistently apply best practices.
• Keep up to date with relevant industry knowledge and regulations.
• Knowledge/Skills/Competencies.
• Project Management - Ability to manage a single line engineering project with a limited number of participants. Create a project/change management plan, establish and distribute project roles, and communicate what is needed from the project participants in order to make the project successful..
• Leadership - Demonstrate "Individual Leadership Behaviors" as per Celestica Leadership Imperatives..
• The following competencies may also be required and performed with help or under supervision: Coaching/Mentoring; Communication/Negotiation/Presentation; Creative Problem Solving; Customer Interaction/Stakeholder Management; Quality & Lean; Working Effectively with Others; D/PFMEA; 8D/Corrective Action; Equipment Safety; Design of Experiments (DOE)..
• Knowledge of computer programming in C.
• Knowledge and understanding of open source development.
• Knowledge and understanding of cross platform development.
• Knowledge and understanding of the bootloader and Linux device driver development.
• Knowledge and understanding of the software revision control (git,svn).
• Ability to code review and pair development.
• Strong administrator knowledge of some or all of the following: UNIX, Linux.
• Typical Experience.
• 3 to 8 years.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Job type:

Full-time

• Under supervision and with minimal assistance define, specify, qualify, install, support and optimize test process and test equipment solutions for manufacturing.
• Lead test process optimization, with a focus on productivity improvements to cycle time and yield for a specific set of equipment within an Operations value stream.
• Debug of test process and equipment solutions using design of experiments, tools, and failure analysis methodologies.
• Collaborate with Quality, Process and Equipment engineers to detect and solve product and test yield and performance issues.
• Develop improvement roadmaps for test coverage, diagnosability, reparability, test time reductions and OEE.
• Analyze and interpret data and information from yield reports and equipment logs and product diagnostics to determine sources of yield loss.
• Provide solution support to process engineers to improve detection of known defect types as part of a Process Control plan.
• Support development of test equipment integration into Manufacturing Execution Systems including yield, tester log and product parametric information.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Typical Experience.
• 4 to 8 years.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Skills:

Data Entry

Job type:

Full-time

• Under supervision and with minimal assistance define, specify, qualify, install, support and optimize test process and test equipment solutions for manufacturing.
• Lead test process optimization, with a focus on productivity improvements to cycle time and yield for a specific set of equipment within an Operations value stream.
• Debug of test process and equipment solutions using design of experiments, tools, and failure analysis methodologies.
• Collaborate with Quality, Process and Equipment engineers to detect and solve product and test yield and performance issues.
• Develop improvement roadmaps for test coverage, diagnosability, reparability, test time reductions and OEE.
• Analyze and interpret data and information from yield reports and equipment logs and product diagnostics to determine sources of yield loss.
• Provide solution support to process engineers to improve detection of known defect types as part of a Process Control plan.
• Support development of test equipment integration into Manufacturing Execution Systems including yield, tester log and product parametric information.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 1 to 3 years.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Skills:

Chemical Engineering, Mechanical Engineering, Electrical Engineering

Job type:

Full-time

• On-Job-Training (OJT) at PTTEP field for familiarize with well operation.
• Attend classroom training on Drilling and Well Services including SSHE e.g. SSHE1, Basic First Aid, Basic Fire Fighting, BOSIET, etc.
• Attend evaluation session; prepare presentation to demonstrate knowledge learnt during OJT.
• Submit any homework or Syndicate work as per assigned by Focal Point Engineer.
• On 2nd - 3rd year
• For Drilling (responsible for NDSV).
• Assist Senior Drilling Supervisor to organize, coordinate and supervise the drilling contractor and service companies work to ensure a safe, smooth and efficient operations progress.
• Follow up the plan for the material, equipment and personnel movement to rig.
• Compile and summarize the drilling activities, anomalies and reports to Senior Drilling Supervisor.
• Follow up cost control, reporting and equipment inventory on the rig.
• Assist Senior Drilling Supervisor on communicating with drilling contractor and other PTTEP representatives as per emergency procedures in emergency situation and/or when lives and properties are endangered including medical evacuation, blow-out, emergency situation, etc. For Well Services (responsible for Well Operations Supervisor).
• Onsite supervision and assist Well Services Supt to coordinate work to ensure that all assigned well services operations are managed and conducted following Company s SSHE policy and industrial standards.
• Compile and summarize well services operations; and report any operation failures/problems to Superintendent for further decision-making for solutions.
• Contributing in implementation, enforcement, developing and updating of safety and operating procedures.
• Provide necessary inputs/feedbacks for technical improvements of well operations.
• Take overall responsibility for the condition of all equipment/tools used in operations under limitation, and ensure that equipment is properly rigged up and tested under pressure control principles and procedure.
• Conduct safety meeting, lead onsite JSA (Job Safety Analysis) and tool box meetings.
• Bachelor Degree in Engineering (Petroleum Engineering, Chemical Engineering, Mechanical Engineering, Electrical Engineering, Production Engineering, and Civil Engineering).
• Good command of both written and spoken English.
• Required TOEIC score 650 and up.

Skills:

Instrument

Job type:

Full-time

• To interface with customer on their Quality, Product and process requirement.
• To assist CQE manager to finalist with customer on Quality, Product and Process requirement in the factory after consultation with respective Product Core Teams and Factory Management.
• To provide customer with effective corrective, preventive actions on quality problems & issues.
• To act as instrument to oversee engineering changes and off spec authorizations for customer.
• To ensure product certification requirements of customers are met in the factory.
• To review, compile and submit First Article report (from NPI group ) to customer.
• To fulfills customer's quality reporting requirements.
• To assist CQE manager with all the data information in CI program.
• Design the Process Flow and Management Plan (PMP) to meet customer requirements.
• Review and understand workmanship std. Criteria, customer requirements or IPC-A-610.
• Monitoring In-process control per engineering specification and stop production when process out of control.
• Work with process engineer to conduct root cause analysis when discrepancy was observed in production line.
• Review daily and weekly quality report i.e Post-reflow inspection yield, In-circuit test,Functional test and Out-going report.
• Follow-up the corrective action ensure effectiveness of action plan.
• Create and revise the Quality checklist for Qality inspection at In-process and Out-going.
• Invole failure analysis of customer return board or unit.
• Organize material purge notice make sure non - conforming material not use inproduction.
• Invole product first article run with New Product Introduction (NPI) team.
• Conduct monthly base-line audit per Base-line audit procedure.
• Conduct process line buy-off before production.
• Conduct Gauge Capability study (GR&R) for critical equipments (if required).
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.
• Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Skills:

Assembly, Mechanical Engineering, AutoCAD

Job type:

Full-time

• Conduct Gemba walks to analyze and address stamping and body assembly quality issues using problem-solving methods and quality control (QC) tools.
• Ensure accuracy in body dimensions and production processes for new model development.
• Interpret and create 3D drawings to facilitate design changes and improvements.
• Enhance production processes to boost efficiency and quality in body assembly.
• Investigate defects and implement solutions to achieve quality targets (DPHU).
• Collaborate with cross-functional teams (CFT) with R&D, production, and automotive suppliers to meet project objectives.
• Track data and report key quality information and findings to cross-functional teams (CFT) and management.
• Provide technical support to the production team to maintain high standards in body assembly.
• Engage in continuous improvement (Kaizen) activities for body assembly.
• Adhere to safety, quality, and environmental regulations in all tasks.
• Qualifications: Bachelor's degree in Mechanical Engineering, Mechatronic Engineering, Automotive Engineering, or a related field.
• Strong problem-solving skills with experience in using QC tools.
• QC Tools Knowledge: Familiarity with QC tools such as Fishbone diagrams, Pareto charts, 5 Whys, Fault Tree Analysis (FTA), root cause analysis.
• Proficient in reading and creating 3D drawings using AutoCAD, CATIA, or similar software.
• Skilled in Microsoft Excel for data analysis and PowerPoint for presentations.
• Able to communicate, discuss, and present in English (TOEIC score of 550 or higher).
• Strong leadership and decision-making skills to support the team when needed.
• Strong collaboration / teamwork skills and the ability to work effectively with various departments.
• Logical thinking, analytical skills, problem solving skills & decision making, proactive approach to challenges and learn new things.
• If you are interested in this job role, please prepare your updated resume or LinkedIn profile for the application process through the Nissan Job Portal.
• Only shortlisted candidate will be contacted for an interview".
• For more information about Nissan's products, services, and commitment to sustainable mobility, visit nissan-global.com. You can also follow us on Facebook, Instagram, X and LinkedIn and see all our latest videos on YouTube.
• Why Nissan?.
• You will definitely get the right answers why you should join us through watching the video on YouTube.
• Samut Prakan Thailand

Experience:

6 years required

Skills:

Compliance, Legal

Job type:

Full-time

• Lead the team to handle all quality excursions independently, and take effective actions on time.
• Oversee the product & material quality from NPI to mass production.
• Develop the quality control plan for respective area (material/process/product).
• Monitor and report quality KPI for internal (factory) and external (customer).
• Drive continuous improvement to benefit customer, CLS and supplier.
• Develop and maintain internal quality system, procedures, work instructions and workmanship standards.
• Lead process/product/system/supplier audit and improvement actions follow up.Industry standards (e.g. ISO).
• Compliance audit.
• Safety audit etc.
• Follow up the EC(Engineering Change), SPCN(Supplier Process Change Notification) to ensure the implementation of changes is timely and accurate (initiated both externally and internally).
• Coach junior quality staff to improve their quality knowledge.
• Accomplish the jobs assignment from the superior and participate in the quality strategy deployment.
• Knowledge/Skills/Competencies.
• Strong knowledge of quality tools, ISO and IPC standards and processes.
• Knowledge of software and its uses in generating reports capturing data presenting data in an understandable format.
• Strong knowledge of product and manufacturing processes.
• Knowledge and understanding of the business unit and how decisions impact customer satisfaction product quality,on-time delivery and profitability of the unit.
• Knowledge of quality tools such as FMEA, PMP, SPC, 8D methodology, etc.
• Knowledge of Six sigma and Lean Kaizen.
• Ability to effectively communicate with a wide variety of internal and external customers.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require repetitive manual movements (e.g., keyboarding), carrying, pushing or pulling light objects, (under 5 kg.), carrying, pushing or pulling heavy objects (over 5 kg.), crouching, climbing.
• Sustained visual concentration on small areas, such as monitors, screens, precise eye/hand coordination, sustained visual concentration on numbers, legal documents.
• Typical Experience.
• 4 to 6 years in a similar role or industry.
• Typical Education.
• Bachelor's degree in related field, or consideration of an equivalent combination of education and experiency.
• Educational requirements may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

5 years required

Skills:

Compliance, Quality Assurance, Assurance, English

Job type:

Full-time

• Manage thread operations team, select, recruit and retain newcomers, develop induction and training plans with support from HR.
• Manage customers thread production orders, requests and possible complaints in agreement with your hierarchy.
• Review and consolidate monthly production forecast by coordinating with each customer and site teams.
• Review and approve monthly expenses and ensure adequation with budgeted resources & customer planning.
• Participate to site/projects meetings as and when necessary and required by the customer. Share MoM with your management.
• Organize internal thread operation meetings when required to ensure teams alignment on objectives and proper coordination with concerned operations team members, get feedback from site activities, suggest continuous improvement and corrective actions as needed.
• Provide regular feedback to team members (top/bottom) to promote a culture of transparency and continuous improvement.
• Manage and control eventual Overtime (O/Ts) and additional shifts with approval from your management.
• Reporting and data analysis Understand and analyze the P&L of each site operations.
• Monitor site expenses weekly, compare with standard budgeted costs, analyze variances, and take prompt corrective actions when necessary.
• Provide a monthly written report on threading operations within m+8 days, for the previous month.
• Quality & Safety Maintain strict compliance with threads quality requirements as specified in the Bar-end Quality Manual (BEPQM).
• Ensure that quantity of threads manufactured at site does not exceed the quantity stated in work orders as well as two times the quantity of couplers supplied, in coordination with Sales Operation Department.
• Ensure strict adherence to customer s safety rules and corporate safety policy.
• Continuously and strictly promote safety awareness across at all sites.
• Production Supervise the coordination of threading activities nationwide and ensure optimum production and utilization/allocation of manpower and equipment.
• Control overall tools and consumables consumption in line with standard budgeted tool life.
• Ensure that production and quality control standards as well as delivery commitment dates are respected whilst remaining within standard production costs.
• Analyze variances between actual and standard costs, highlight major variances and suggest corrective actions for approval.
• Review and analyze operations related reports and interact with concerned departments such as Sales Operation, maintenance (After Sales Services) and Quality Assurance to ensure timely resolution of production and QC problems as well as maintenance problems.
• Inventories Monitor inventories of tools and consumables at all stores and project sites in line with defined min/max stock levels. Based on actual inventories and short-term demand at each partner sites and project sites, review and approve stock transfer requests received from each site, communicate to planning and ensure timely dispatch of required tools from central store to partner sites and project sites.
• Follow up tools consumption report to ensure best usage of tools and propose improvement plan.
• Participate in monthly stock taking process following accounting department procedure.
• Maintenance Ensure strict application of the preventive maintenance program for all site equipment.
• Support close coordination between operations and maintenance teams (AFS) for the planning of equipment servicing as well as major preventive maintenance actions.
• Propose equipment and tools improvements.
• Coordination with other departments Keep regular and friendly communication as well as sharing of information with other departments of the company and ensure such principle is supported across the team.
• Approve reconcilement of invoices monthly considering actual quantity of threads manufactured and deductions towards outside threading and customer storage usage.
• Propose and coordinate with After Sales Service team the machine relocation and machine set up at the new sites.
• Ensure at all times that each set of equipment is producing enough threads to cover at least its depreciation cost. Initiate machine relocation and/or labor relocation if the targets are not met.
• Initiate and foster a spirit of cooperation within and between departments.
• Qualifications Requirement: Bachelors degree in Civil Engineering.
• At least 10 years of experience in the construction industry with 5 years working at a managerial/supervision level. Good knowledge of project planning and/or project management, quality assurance systems and maintenance are required.
• Team player with excellent interpersonal and communication skills.
• Ability to be effective both strategically and at a hands-on, operational level.
• Able to travel in Thailand when required.
• Written and verbal proficiency in English a must.
• Computer literate.
• Good command of English communication.
• Experience in Microsoft Office, Microsoft Project, and ERP.
• Ability to understand technical drawings.
• Understanding of common manufacturing techniques.

Skills:

Linux, Software Development, Git, English

Job type:

Full-time

• Design and develop high-performance embedded system for communication, industrial, medical devices, etc.
• Broad range of target system from BareMetal Firmware, DSP, RTOS, Embedded Linux and FPGA (Digital logic design).
• Analyze and understand user requirements and translate them into technical specifications, encompassing both software and.
• hardware functionalities.
• Develop and implement unit and integration tests for both software and hardware components.
• Deploy and monitor embedded systems in production, troubleshooting issues across both hardware and software domains.
• Stay up-to-date with the latest technologies and trends in embedded systems, software development, and relevant hardware advancements.
• Document code, technical decisions, and hardware integration details.
• Contribute actively to our collaborative and fast-paced environment, helping everyone reach new heights of success.
• Knowledge/Skills/Competencies.
• Proficient in C/C++ programming on embedded applications.
• Knowledge in Could (AWS or Azure), Mobile Application, FPGA or Cybersecurity is plus.
• Understanding of circuits and electronics, able to read schematics, electronic component datasheets.
• Excellent communication and collaboration skills.
• Good written and verbal English communication.
• Self-motivated with the capability to drive development efforts to completion.
• Passion for building innovative and reliable embedded systems that solve real-world problems.
• Typical Experience.
• Experience with version control systems (e.g., Git) and development methodologies.
• Exceptional problem-solving, analytical, and critical thinking skills.
• Typical Education.
• Bachelor s Degree in Computer, Electronics, Electrical Engineering or similar field.
• Fresh graduates are welcome to apply.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

3 years required

Skills:

Production planning, Excel, ERP, English

Job type:

Full-time

• Possess basic knowledge of supply chain activities, including the transformation of natural resources, raw materials, and components into a finished product that is delivered to the end customer.
• A material planner has responsibility for the planning and smooth running of the production process. Pian, schedule, release, and control material delivery based on MRP time-phased requirements.
• Incorporate methods and techniques involved in lean and Just-in-Time (JIT) managemen ...
• Schedule, co-ordinate, and expedite of material between supplier and warehousing to meet the production schedule.
• Communicate with the Production Planning, Production, Quality Control, Engineering, and Sales departments on a regular basis to resolve potential schedule interruptions.
• Effectively sets priorities with an appropriate sense of what is most important. Manages time effectively to meet schedules and deadlines.
• Monitor day to day work progress and prepare the weekly and monthly program and report.
• Uses systems to keep track of information; keeps detailed records as necessary.
• Bachelor's Degree or higher in engineering or any related fields.
• Experience at least 3 -5 years in the planning.
• To speak and understand business English applied to company working situations.
• To use Outlook, Word, PowerPoint, Excel, intranet, internet, ERP (as applicable) at the level needed for the work application (kinds of documents and speed of the work).
• Project work experience.
• Great communication skills.
• Planning and analytical skills.
• Have good problem-solving skills and decisions making.

Experience:

6 years required

Skills:

Problem Solving, Teamwork, English

Job type:

Full-time

• Ensures that the processes are carried out and comply with the specifications required by customers and that it complies with the local requirements of the organization and the requirements of MPS (Manufacturing Process Standards).
• Ensures that the specifications, the acceptance criteria of the products by the operational staff are known and respected; ensures that operators comply with product quality inspection procedures in accordance with customer requirements.
• Provides support in order to optimize processes, identifies and initiates opportunit ...
• Prepares and collects data from the key points of the processes and prepares the internal quality reports.
• Monitors product yields, process (yield) and scrap rate (scrap) or other quality indicators.
• Participates in the activities of PFMEA analysis and elaboration of Control Plan.
• Assesses and updates working instructions for specific products.
• Knowledge/Skills/Competencies.
• PC operating knowledge - Ms Office.
• Knowledge of English - intermediate level.
• Knowledge and understanding of ISO9001, ISO13485, ISO19011, ISO14001, ISO 50001 and ISO 14971 management systems knowledge and understanding of quality and process improvements techniques and tools good analytical and problem solving skills ability to effectively communicate with a wide variety of internal and external customers teamwork skills.
• Strong knowledge in manufacturing operations Understand quality tools such as FMEA, PMP, SPC, 8D methodology, etc.
• Physical Demands..
• Typical Experience.
• 4 to 6 years in a similar role or industry.
• Typical Education.
• Bachelor's Degree.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Skills:

Software Development, Git, Electrical Engineering, English

Job type:

Full-time

• Design and develop high-performance embedded system (Firmware and FPGA) for communication, industrial and medical devices.
• Analyze and understand user requirements and translate them into technical specifications, encompassing both software and hardware functionalities..
• Develop and implement unit and integration tests for both software and hardware components..
• Troubleshooting issues across both hardware and software domains..
• Stay up-to-date with the latest technologies and trends in embedded systems, software development, and relevant hardware advancements..
• Document code, technical decisions, and hardware integration details..
• Contribute actively to our collaborative and fast-paced environment, helping everyone reach new heights of success..
• Knowledge/Skills/Competencies.
• Knowledge in at least one programming language (C, C++, VHDL or Verilog), more than one is plus.
• Understanding of circuits and electronics, able to read schematics, electronic component datasheets.
• Experience with version control systems (e.g., Git) and development methodologies.
• Excellent problem-solving, analytical, and critical thinking skills.
• Excellent communication and collaboration skills.
• Good written and verbal English communication.
• Self-motivated with the capability to drive development efforts to completion.
• Passion for building innovative and reliable embedded systems that solve real-world problems (from hardware, digital logic design to firmware).
• Typical Experience.
• 0 to 6 years.
• Typical Education.
• Bachelor s Degree in Computer, Electronics, Electrical Engineering or similar field.
• Fresh graduates are welcome to apply.
• On-boarding training and workshop will be provided for Embedded C, FPGA Design, Embedded Security, and SDLC..
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

2 years required

Skills:

Public Relations, Legal, Computer Security, English

Job type:

Full-time

• Executes cybersecurity engineer tasks including, but not limited to, security patch management, security vulnerability management, and security configuration management.
• Tests, implements, deploys, maintains, reviews, and administers the cybersecurity tools.
• Assist in identifying, prioritizing, and coordinating the protection of critical cyber defense infrastructure and key resources.
• Coordinate with Cyber Defense Analysts to manage and administer the updating of rules and signatures (e.g., intrusion detection/protection systems, antivirus, and content blacklists) for specialized cyber defense applications.
• Identify potential conflicts with the implementation of any cyber defense tools (e.g., tool and signature testing and optimization).
• Operates and maintains production information security systems.
• Ensures proper cybersecurity documentation is in place regarding standard operating procedures.
• Monitors the industry and external environment for emerging threats and advises relevant stakeholders on appropriate courses of action.
• Oversees incident response planning and the investigation of security breaches and assists with any associated disciplinary, public relations, and legal matters.
• Applies expert knowledge and skills to resolve problems, including support concepts and methods, problem isolation and troubleshooting procedures, system and file recovery processes, and operating system and network configurations.
• Prepares and presents cogent and cohesive analyses and briefings advising management on new technological developments, techniques, and enhancements that result in increased time and cost efficiencies.
• Provides advice and assistance to troubleshoot the most complex problems in a manner that minimizes interruptions in the ability to carry out critical business activities.
• Supports rapid response teams in response to customer service problems resulting from catastrophic events such as virus infections or widespread power outages.
• Supports the development of a formal cyber security risk assessment program.
• Supports and assists in maintaining a vulnerability/gap/response assessment program.
• Supports the ongoing maintenance of the cyber-Kill Chain for the company, focusing on phases of cyber-attack and remediation/mitigation for each phase.
• Supports ongoing activities to develop, communicate, and support appropriate standards and risk controls associated with digital data.
• Supports the development and maintenance of a company Data Protection program.
• Responds to cybersecurity alerts.
• Cascade and leverage cybersecurity control and practice to the entire company group.
• Bachelor s or Master s degree in Computer Engineering, MIS, IT, or a related field.
• At least 2 years experience in computer security and 5 years in IT infrastructure.
• Have a foundation in good information security practices.
• Knowledge of International Security frameworks, Standards, and Guidelines, e.g., COBIT, NIST-800, ISO 27001, PCI-DSS, OWASP, etc.
• Experience in Security tools, e.g., EDR, ATP, WAF, IPS/IDS, Deception, TI/TIP, Anti DDoS.
• Experience in Cloud Environments, e.g., Google Cloud, AWS, Microsoft Azure.
• Experience with system and application security management and control.
• Experience with system, network, and OS hardening techniques. (e.g., remove unnecessary services, password policies, network segmentation, enable logging, least privilege, etc.).
• Experience with facilitating information security risk assessments.
• Technical writing, documentation development, process mapping, and visual communication skills.
• Hands-on experience with computer programming languages and/or scripting languages such as Python, Java, and Shell for automation.
• Professional certificates related to work (e.g., CISSP, CISM, AWS Certified Security, or similar general security certification) are desirable.
• Talent to identify and create a broad vision for a security solution and to execute it;.
• Systems Thinking - the ability to see how parts interact with the whole (big picture thinking).
• Proven experience of acting as an expert in project teams.
• A positive, can-do attitude who naturally expresses a high degree of empathy to others.
• Ability to explain your thoughts or findings also to non-technical professionals.
• Strong problem-solving and analytical abilities Able to work under minimal supervision, detail oriented.
• Excellent English (Spoken and Written).
• Location: True Digital Park, Punnawithi.

Experience:

1 year required

Job type:

Full-time

• Measure and improve line balance, and produce flow charts.
• Analyze and find solutions for production process problems.
• Improve productivity and efficiency by solving bottlenecks on the production line.
• Evaluate production capacity, manpower, and equipment needs for each model.
• Enhance production capacity and reduce production costs.
• Conduct time and motion studies to improve standard time and reduce labor costs.
• Plan, control, and improve manpower.
• Lead Kaizen activities and collaborate with related functions.
• Improve and introduce IE tools.
• Perform assignments as directed by the supervisor.
• Qualifications: Bachelor of Engineering in Industrial Engineering or related field.
• 1-5 years of experience as an industrial engineer in the automotive industry or related fields.
• Knowledge of IE technical tooling improvement.
• Strong Logical thinking, analytical skills, problem solving skills & decision making.
• Good command of both spoken and written English, Able to communicate, discuss, and present in English (TOEIC score of 550 or higher).
• Excellent time management skills for working within established timelines and schedules.
• If you are interested in this job role, please prepare your updated resume or LinkedIn profile for the application process through the Nissan Job Portal.
• Only shortlisted candidate will be contacted for an interview".
• For more information about Nissan's products, services, and commitment to sustainable mobility, visit nissan-global.com. You can also follow us on Facebook, Instagram, X and LinkedIn and see all our latest videos on YouTube.
• Why Nissan?.
• You will definitely get the right answers why you should join us through watching the video on YouTube.
• Samut Prakan Thailand