Filter Jobs

Experience:

3 years required

Skills:

Purchasing, Automation, Assembly

Job type:

Full-time

• With minimal oversight, execute tasks in the equipment development project including the purchasing and implementation of standard off the shelf solutions and/or development of new standard automation equipment solutions.
• Execute the hardware and software improvements of automated lines and off the shelf equipment, via the analysis of Overall Equipment Efficiency (OEE) and other available data.
• Liaise with multiple stakeholders including solution providers for design, technical ...
• Support correcting of technical problems impacting equipment validation activities associated with Factory Acceptance Test (FAT) and Site Acceptance Test (SAT).
• Execute and optimize/improve maintenance plans and activities.
• Support customer product road map using Celestica Automation E2E process and tools such as User Requirement Specifications (URS) and Design for Automation Assembly (DFAA) and PM workbook.
• Drive problem solving and corrective actions related to causes of machine failures, speed loss or quality issues.
• Work with Process Engineering to ensure equipment is statistically capable of meeting the product manufacturing requirements.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 1 to 3 years of related experienc;Experience in similar job roles.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Skills:

Market Research, Research, Contracts, English

Job type:

Full-time

• Develop and implement purchasing and contract management instructions, policies, procedures and vendor selection criteria;.
• Direct and coordinate activities of staff engaged in buying and distributing goods and services for the relevant departments;.
• Control purchasing department budgets;.
• Forecast demand for services and products;.
• Conduct or get market research to ascertain the best products and suppliers in terms of best value, delivery schedules and quality. Forecast price trends and their impact on future activities;.
• Develop purchasing strategies to make sure that cost savings and supplier performance targets are met - or exceeded;.
• Represent company in negotiating trading terms, contracts and formulating policies with suppliers. Monitoring the quality of goods or services provided;.
• Develop and update the sources of vendors and market prices database;.
• Evaluate bids and make recommendations, based on commercial and technical factors;.
• Ensure suppliers are aware of business objectives. Undertake value-for-money reviews of existing contracts and agreements and lead the periodic performance review for vendors;.
• Liaise between suppliers, manufacturers and relevant internal departments;.
• Build and maintain good relationships with new and existing key suppliers;.
• Process payments and invoices in line with the agreed trading terms;.
• Resolve vendor or contractor claims disputes;.
• Keep contract files and use them as a reference for the future;.
• Keep a constant check on stock levels;.
• Prepare reports regarding market conditions and merchandise costs;.
• Provide reports and statistics on spending and saving.
• Any ad-hoc project as required.
• Bachelor or advanced degree.
• Business Administration, Trade, Finance.
• At least 7 years of experience in procurement field.
• Good command of spoken and written English and strong Excel/Powerpoint/database skills and ERP software.
• Strong analytical skills and logical thinking.
• Good interpersonal, and leadership skills.
• Strong communication, presentation, collaboration, negotiation, problem-solving and team management.
• Result-oriented with abilities to work well under ambiguity, changes, pressure, detailed information and tight deadlines.
• Highly committed to professional ethics.
• CP AXTRA | Lotus's
• CP AXTRA Public Company Limited.
• Nawamin Office: Buengkum, Bangkok 10230, Thailand.
• By applying for this position, you consent to the collection, use and disclosure of your personal data to us, our recruitment firms and all relevant third parties for the purpose of processing your application for this job position (or any other suitable positions within Lotus's and its subsidiaries, if any). You understand and acknowledge that your personal data will be processed in accordance with the law and our policy. .

Skills:

English

Job type:

Full-time

• ตรวจสอบระบบงานคลังน้ำมัน โรงกลั่น สถานีบริการ และงานอื่น ๆ ที่ได้รับมอบหมายตามแผนงาน.
• วางแผนการตรวจสอบ ปฏิบัติงานตรวจสอบภายในตามมาตรฐานการตรวจสอบภายใน และจัดทำกระดาษทำการสรุปผลการตรวจสอบ.
• นำเสนอผลการตรวจสอบและข้อเสนอแนะต่อผู้บริหาร.
• จัดทำรายงานการตรวจสอบเสนอผู้บริหารและคณะกรรมการตรวจสอบ.
• ติดตามการปฏิบัติตามข้อเสนอแนะ.
• งานตามที่ผู้บังคับบัญชามอบหมายซึ่งไม่ขัดต่อความเป็นอิสระ.
• ระดับการศึกษา ปริญญาโท ทางด้านวิศวกรรมศาสตร์ / วิทยาศาสตร์ (เคมี เครื่องกล ไฟฟ้า อุตสาหการ เครื่องมือวัด).
• ประสบการณ์ทำงาน งานตรวจสอบในอุตสาหกรรมปิโตรเลียม ปิโตรเคมี พลังงาน อย่างน้อย 2 ปี (Prefer).
• อื่น ๆ ใบประกอบวิชาชีพ/ประกาศนียบัตรวิชาชีพด้านวิศวกรรมควบคุม,Certificate ด้านการตรวจสอบ.
• Skill Computer Software and Application Knowledge, Good command of the English language, Engineering Standard Knowledge.

Job type:

Full-time

• Responsible for daily monitoring of process unit/equipment, troubleshooting and set up operating targets to ensure that the units are operated safety, efficiently, well optimized, and meet environmental regulation.
• Provide process engineering studies, analyses and design for improving plant efficiency, safety, yield target with optimum energy consumption and in compliance with the government environmental regulation.
• Identify investment opportunities/projects for plant improvement; evaluate project e ...
• appropriation support; and provide technical support during detailed engineering until project start up..
• Bachelor's Degree in Chemical Engineering with GPAX 3.00 or more.
• 0-3 years of experience in Chemical Engineering or Refinery business.
• Desire to work upcountry (Sriracha, Chonburi).

Skills:

Compliance, AutoCAD, Revit, Malay

Job type:

Full-time

• Design and implement mechanical systems for data centers, including HVAC, cooling systems, fire suppression, and plumbing.
• Oversee the installation, testing, and commissioning of mechanical systems to ensure compliance with project requirements and industry standards.
• Perform regular maintenance and inspections on mechanical systems to ensure optimal performance and reliability.
• Diagnose and troubleshoot mechanical system issues to minimize downtime and maintain seamless data center operations.
• Maintain detailed records of mechanical system configurations, maintenance schedules, and compliance with safety regulations.
• Collaborate with vendors, contractors, and stakeholders to ensure all mechanical work meets project specifications and quality standards.
• Monitor and optimize the performance of cooling and ventilation systems to ensure energy efficiency and adherence to sustainability goals.
• Participate in emergency response efforts, providing technical support to resolve mechanical system failures quickly and effectively.
• Stay updated on the latest technologies and best practices in mechanical engineering for data centers through continuous learning and professional development.
• Provide input on mechanical system designs during project planning and contribute to the preparation of technical documentation and reports.
• Bachelor s degree in mechanical engineering or a related field is required. field. OR additional four (4) years of related experience. OR additional four (4) years of related experience.
• 10+ years of experience in mechanical engineering, preferably within a data center or critical environment.
• 3+ years of senior level construction management or design management experience.
• Basic understanding of HVAC systems, mechanical design principles, and relevant software tools (e.g., AutoCAD).
• Strong problem-solving abilities to identify issues and propose effective solutions.
• Good verbal and written communication skills for effective collaboration with team members and vendors.
• Ability to work well within a team environment while also being capable of taking initiative when necessary.
• Strong knowledge of industry standards such as ASHRAE, ISO, and NFPA related to mechanical systems.
• Experience with system performance monitoring, troubleshooting, and energy efficiency optimization.
• Proficiency in mechanical design tools such as AutoCAD, Revit, or other relevant software.
• Fluent in Thai, Malay (depending upon location) and English both written and verbal (Minimum 750 TOEIC score).
• Goal-Oriented, Unity, Learning, Flexible..

Skills:

Compliance, AutoCAD, Malay

Job type:

Full-time

• Assist in the design and development of mechanical systems including HVAC, Fire protection, and Hydraulic systems tailored for data center needs.
• Help plan and manage maintenance activities for mechanical systems, ensuring adherence to industry standards and operational efficiency.
• Maintain accurate records of mechanical system designs, maintenance activities, and compliance with safety regulations.
• Participate in site inspections to assess mechanical systems' condition and ensure compliance with design specifications.
• Assist in coordinating with third-party vendors for maintenance and upgrades, ensuring that all work meets established standards.
• Be available to respond to on-site incidents and assist senior engineers in troubleshooting mechanical failures.
• Engage in ongoing training and professional development opportunities to stay updated on the latest technologies in the data center industry.
• Bachelor s degree in mechanical engineering or a related field is required.
• 3-4 years of experience in mechanical engineering, preferably within a data center or critical environment.
• Basic understanding of HVAC systems, mechanical design principles, and relevant software tools (e.g., AutoCAD).
• Strong problem-solving abilities to identify issues and propose effective solutions.
• Good verbal and written communication skills for effective collaboration with team members and vendors.
• Ability to work well within a team environment while also being capable of taking initiative when necessary.
• Fluent in Thai, Malay (depending upon location) and English both written and verbal (Minimum 750 TOEIC score).
• Goal-Oriented, Unity, Learning, Flexible.

Skills:

Automation, DevOps, Python

Job type:

Full-time

• Works closely with Tech Leads and developers of various teams to develop automation pipelines and CI/CD.
• Develops self-serve tools/artefacts to development teams to support the SDLC (e.g. containerized dev env, testing env etc.).
• Configures the infrastructure using IaaS/PaaS products and own developed tools.
• Actively participates in deploying application artifacts to appropriate target environments using the supported technologies and infrastructure.
• Participates in planning delivery time, code quality, and process efficiency improvement projects.
• Performs maintenance tasks as infrastructure health checks and monitoring.
• Identifies bottlenecks in development and deployment processes and designs automation solutions to mitigate.
• Maintains and grows knowledge of platform configuration management, monitoring, and troubleshooting.
• Collaborates with the rest of DevOps team to deliver consistent and holistic solutions to the organization.
• RequirementsExcellent scripting skills (e.g. Python, Bash, Perl).
• Experienced with building and maintaining large scale, cloud-based container-based platforms (in IaaS and PaaS).
• Working knowledge of deployment automation solutions (i.e. Terraform, Puppet, Chef, Ansible).
• Experienced AWS platform (certification is a plus).
• Experienced with containers and Kubernetes.
• Experienced with continuous integration and related tools such as GitlabCI, Jenkins, Hudson, Maven, Ant, Git, Sonar, etc.
• Familiar with security automation tools such as static application security testing etc.
• Strong understanding of Agile methodologies.
• Experience as a DevOps or SRE Engineer on a cross-functional agile team preferred.
• BenefitsHealth Insurance - At Maknet, we care about your health! Group insurance from a top insurance company is included in your benefits OPD, IPD, Emergency OPD.
• Provident Fund - Maknet cares about your long-term plan! We offer 3% provident fund.
• Year-end bonus - We include variable and performance bonus for our employees.
• Gym Facilities - Our Head office has a fitness center, yoga room, and recreational space. Enjoy Bangkok scenery and work your body!.
• Attractive Vacations days - Enjoy our attractive annual leave. Let s say the minimum is 18 days!.
• Flexible working hours - We know people have different productive cycles. Choose your way of work whether you are a night owl or an early riser.
• No overtime - We work 5 days a week with. We set our own goals and deadlines.
• Cool hardware - New MacBook. The tool to help you be the best of yourself.
• Free car parking space - No more stress or extra cost if you drive to work. We offer free parking space for our employees.
• Best Culture.
• Clear focus.
• Diverse Workplace (Our members are from around the world!).
• Non-hierarchical and agile environment.
• Growth opportunity and career path.

Skills:

ETL, Compliance, SQL

Job type:

Full-time

• Design, develop, and maintain data pipelines to extract, transform, and load (ETL) data from various sources into a centralized data warehouse or data lake.
• Integrate data from different sources, such as databases, APIs, and third-party applications, ensuring data consistency and accuracy.
• Create and maintain data models and schemas to facilitate data storage and retrieval, following best practices for data warehousing and database management.
• Implement data quality checks and validation processes to ensure data accuracy, completeness, and consistency.
• Optimize data pipelines and systems for performance, scalability, and efficiency, making sure data processing meets business requirements.
• Implement data security measures to protect sensitive information and ensure compliance with data privacy regulations (e.g., GDPR, HIPAA).
• Document data engineering processes, data lineage, and system architecture to facilitate knowledge sharing and future maintenance.
• Set up monitoring and alerting systems to detect and address issues with data pipelines and systems proactively.
• Collaborate with cross-functional teams, including data scientists, analysts, and software engineers, to understand their data needs and provide the necessary infrastructure and support.
• Stay up-to-date with the latest data engineering technologies and tools, and evaluate their applicability to the organization's data stack.
• Bachelor's degree in computer science, information technology, or a related field. A master's degree is a plus.
• Strong proficiency in data engineering tools and technologies, such as SQL, ETL frameworks (e.g., Apache Spark, Apache Airflow, Apache Beam).
• Experience with Google BigQuery for data warehousing.
• Experience with Google Cloud Dataflow or Dataproc.
• Experience with programming languages like Python, Java, or Scala.
• Experience with building streaming data pipelines on Google Cloud.
• Knowledge of database design, data modeling, and data integration techniques.
• Familiarity with data governance, data security, and compliance standards.
• Problem-solving skills and attention to detail.
• Strong communication and collaboration skills.

Skills:

Compliance, AutoCAD, Revit

Job type:

Full-time

• Oversee and review the design and implementation of electrical distribution systems, including high voltage (HV), low voltage (LV), and DCIM or ECMS systems, ensuring alignment with the client's requirements and industry best practices.
• Monitor and ensure third-party vendors and contractors execute maintenance activities for electrical systems in compliance with established standards, operational efficiency, and project specifications.
• Identify and provide solutions for potential electrical issues to minimize risks, re ...
• Review and maintain detailed records of electrical system configurations, testing reports, and compliance documentation to support project milestones and regulatory requirements.
• Act as a liaison between the client and contractors to ensure all electrical works meet contractual obligations and high-quality standards.
• Support the client during emergency response efforts by providing technical insights and ensuring contractors follow established protocols to restore normal operations efficiently.
• Facilitate regular assessments to ensure energy efficiency and sustainability targets are met, recommending optimization strategies where applicable.
• Facilitate and coordinate training sessions or knowledge-sharing workshops to familiarize the client s operations team with new electrical technologies and systems.
• Oversee and validate the testing, commissioning, and handover of electrical systems to ensure seamless integration into the operational framework and alignment with the client s goals.
• Regularly inspect ongoing construction and installation activities, ensuring alignment with approved designs, codes, and project schedules.
• Bachelor s degree in electrical engineering or a related field. OR additional four (4) years of related experience. OR additional four (4) years of related experience.
• 10+ years of experience in electrical engineering, preferably in data centers. Internships or co-op experiences are advantageous.
• 3+ years of senior level construction management or design management experience.
• Basic knowledge of electrical systems, including transformers, switchgear, UPS systems, generators, DDC, PLC, and relevant software tools (e.g., AutoCAD, Revit, ETAP).
• Familiarity with electrical safety protocols and regulations.
• Strong problem-solving skills with the ability to quickly identify issues and propose effective solutions.
• Good verbal and written communication skills for effective collaboration with team members and external partners.
• Ability to work effectively in a team-oriented environment while being proactive in taking on responsibilities.
• Fluent in English, both written and verbal (Minimum 750 TOEIC score).

Skills:

Project Management

Job type:

Full-time

• Manage network-related projects and work with the IT team and 3rd parties on related IT projects.
• Designing and implementing new network solutions and/or improving the efficiency of current networks.
• Maintain, Optimize, troubleshooting and resolve system and network infrastructure to meet SLA Oversee and perform to fix various vulnerabilities of network, patch and upgrade to increase security.
• Manage network diagram, asset, component inventory and related documentation.
• Graduated from BSc/BA in computer science, engineering or relevant field.
• Understand network infrastructure (LAN/WLAN/WAN).
• Understand network vulnerability assessment.
• Proven experience with network capacity planning, network security principles, and general network management best practices.
• Experience at least 8 years with network design/planning/operation/troubleshooting.
• Network technical skill for switch, firewall, load balance, wireless, LAN/WAN/WLAN, network datacenter solution.
• Network design principles, best practices, and related technologies.
• Familiar with Cisco, Huawei equipment.
• Working in a team-oriented, collaborative environment.
• Strong analytical and troubleshooting skills.
• Strong IT project management.
• Strong interpersonal skill and service-oriented mindset.

Experience:

7 years required

Skills:

Nutrition, Product Development, Project Management

Job type:

Full-time

• Mainly responsible for process development and product qualifications for infant, children and adult nutrition products for Asean and South Asia manufactured at third party subcontractors and MJN plants.
• Responsible for process development, commissioning and qualification for equipment in R&D technology centers.
• Make use of internal and external technical resources, perform technical assessments, experiments and testing, implement process development from product concept, formu ...
• Prepare technical documents necessary for each phase of the development from initiation stage, process validation to post launch and handover for product maintenance after launch.
• Interactions with cross-functions include market, regional and global R&D functions of Regulatory Affairs, Product Development, Process Engineering, R&D Operations, Analytical Science, Sensory Teams, Packaging Managers, R&D Technical Centers Teams, Project Management, Quality Managers, Quality Laboratory Staff, Compliance Managers, Procurement, Finance, Supply Chain, Marketing, Suppliers, Technology Providers, Research Institutions, third-party service providers, R&D technicians/consultants/temp staff (leased).
• The experience we're looking for.
• B.S. in Engineering, such as and not limited to, Chemical Engineering, Food Engineering, Biochemical Engineering, Mechanical Engineering, or any other Engineering related course. Master s Degree is an advantage.
• At least 7 years of experience in food/pharmaceutical/beverage manufacturing industry in R&D, QA or production functions with at least 5 years of those spent working in aspects of manufacturing process, process engineering, or process development.
• At least 3 years of experience as Process Engineer operating key process technologies related to food and beverage manufacturing such as dry powder blending, powder conveying, liquid processing and spray drying; experience in any one of aseptic process and packaging, membrane filtration and separation technologies, enzymatic and hydrolysis processes is an advantage.
• Demonstrate working knowledge on key unit operations and process technologies used in food and beverage industry and its relationship to overall product functionality and quality.
• Demonstrate application of mass balance, heat transfer, process flow, process specification of one or more technology platforms.
• Applies statistical design concepts towards the execution of process studies.
• Demonstrate skill creating process flow diagrams and related engineering diagrams.
• Demonstrates understanding of technical and industry practices, manufacturing industries, relevant unit operations necessary for successful qualification of new and improved processes.
• The skills for success.
• Business Strategy, Task Execution Under Pressure, Makes strategic Business Decisions, Business Accumen, Commercial Awareness, Objective Setting, Accountability, Adaptability, Consumer Insight, Creative Direction, Consumer Needs, R&D, Product Lifecycle Management, Change Leadership, Intellectual Property, Business Partnership, Collaboration and partnership building, Collaborator, Relationship Management, Adapt to changes in technological development plans, Product vision and strategy development, Ability to challenge the status quo and propose improvement, Innovation Processes, Predictive Analytics, Digital transformation for R&D, Quality and Manufacturing.
• What we offer.
• With inclusion at the heart of everything we do, working alongside our four global Employee Resource Groups, we support our people at every step of their career journey, helping them to succeed in their own individual way.
• We invest in the wellbeing of our people through parental benefits, an Employee Assistance Program to promote mental health, and life insurance for all employees globally. We have a range of other benefits in line with the local market. Through our global share plans we offer the opportunity to save and share in Reckitt's potential future successes. For eligible roles, we also offer short-term incentives to recognise, appreciate and reward your work for delivering outstanding results. You will be rewarded in line with Reckitt's pay for performance philosophy.
• Equality.
• We recognise that in real life, great people don't always 'tick all the boxes'. That's why we hire for potential as well as experience. Even if you don't meet every point on the job description, if this role and our company feels like a good fit for you, we still want to hear from you.
• All qualified applicants will receive consideration for employment without regard to age, disability or medical condition; colour, ethnicity, race, citizenship, and national origin; religion, faith; pregnancy, family status and caring responsibilities; sexual orientation; sex, gender identity, gender expression, and transgender identity; protected veteran status; size or any other basis protected by appropriate law.

Skills:

Research, Automation, Statistics

Job type:

Full-time

• Work on Data Architecture. They use a systematic approach to plan, create, and maintain data architectures while also keeping it aligned with business requirements.
• Collect Data. Before initiating any work on the database, they have to obtain data from the right sources. After formulating a set of dataset processes, data engineers store optimized data.
• Conduct Research. Data engineers conduct research in the industry to address any issues that can arise while tackling a business problem.
• Automate Tasks. Data engineers dive into data and pinpoint tasks where manual participation can be eliminated with automation.
• Automate Tasks. Data engineers dive into data and pinpoint tasks where manual participation can be eliminated with automation.
• Bachelor Degree in IT, computer science, statistics, mathematics, business, or related field.
• Minimum of 3 years' experience in data engineer roles.
• Experience in the data analytics lifecycle including problem identification, measurement/matrix, exploratory data analysis and data insight presentation.
• Experience with data tools and languages like CLOUD, Python, Java similar.
• Experience with data processing, ETL and workflow and messaging queue like Kafka.
• Data Warehousing.
• Data Structure.
• ETL Tools Programming Languages (Python, Java, Pyspark).

Skills:

Automation, Software Development, Project Management

Job type:

Full-time

• Manage the full lifecycle of digital automation projects from requirement gathering and process analysis to system design, development, testing, deployment, and post-launch support.
• Collaborate with business stakeholders to understand current processes, identify improvement opportunities, and document detailed requirements for automation solutions.
• Utilize low-code/no-code platforms, particularly Microsoft Power Platform, to design and develop digital solutions that streamline workflows and enhance integration bet ...
• Identify tasks suitable for automation and implement RPA solutions to optimize efficiency and reduce manual efforts.
• Develop and deliver training sessions and support materials to ensure successful user adoption of new digital solutions, addressing any feedback to continuously improve the system.
• Monitor the performance of implemented solutions, gather user feedback, and make iterative improvements to ensure they continue to meet business needs.
• Bachelor s degree in Computer Science, Information Technology, Business Information Systems, or a related field. Additional certifications in process automation or digital transformation are a plus.
• Experience:Prior experience or internships in digital automation, process improvement, or software development projects.
• Exposure to low-code/no-code platforms, preferably Microsoft Power Platform, and familiarity with RPA tools is highly desirable.
• Experience managing projects through the full software development lifecycle is a plus.
• Technical Skills:Solid understanding of digital process automation, workflow integration, and software development principles.
• Familiarity with agile methodologies and project management best practices.
• Quick learner with the ability to adapt to emerging technologies and tools.

Skills:

Compliance, Research, Automation

Job type:

Full-time

• DataOps, MLOps, and AIOpsDesign, build, and optimize scalable, secure, and efficient data pipelines for AI/ML workflows.
• Automate data ingestion, transformation, and deployment across AWS, GCP, and Azure.
• Implement MLOps and AIOps for model versioning, monitoring, and automated retraining.
• Ensure performance, security, scalability, and cost efficiency in AI lifecycle management.
• Performance Optimization & SecurityMonitor, troubleshoot, and optimize AI/ML pipelines and data workflows to enhance reliability.
• Implement data governance policies, security best practices, and compliance standards.
• Collaborate with cybersecurity teams to address vulnerabilities and ensure data protection.
• Data Engineering & System IntegrationDevelop and manage real-time and batch data pipelines to support AI-driven applications.
• Enable seamless integration of AI/ML solutions with enterprise systems, APIs, and external platforms.
• Ensure data consistency, quality, and lineage tracking across the AI/ML ecosystem.
• AI/ML Model Deployment & OptimizationDeploy and manage AI/ML models in production, ensuring accuracy, scalability, and efficiency.
• Automate model retraining, performance monitoring, and drift detection for continuous improvement.
• Optimize AI workloads for resource efficiency and cost-effectiveness on cloud platforms.
• Continuous Learning & InnovationStay updated on AI/ML advancements, cloud technologies, and big data innovations.
• Contribute to proof-of-concept projects, AI process improvements, and best practices.
• Participate in internal research, knowledge-sharing, and AI governance discussions.
• Cross-Functional Collaboration & Business UnderstandingWork with business teams to ensure AI models align with organizational objectives.
• Gain a basic understanding of how AI/ML supports predictive analytics, demand forecasting, automation, personalization, and content generation.
• Bachelor s degree in Computer Science, Data Engineering, Information Technology, or a related field. Advanced degrees or relevant certifications (e.g., AWS Certified Data Analytics, Google Professional Data Engineer, Azure Data Engineer) are a plus.
• Experience:Minimum of 3-5 years experience in a data engineering or operations role, with a focus on DataOps, MLOps, or AIOps.
• Proven experience managing cloud platforms (AWS, GCP, and/or Azure) in a production environment.
• Hands-on experience with designing, operating, and optimizing data pipelines and AI/ML workflows.
• Technical Skills:Proficiency in scripting languages such as Python and Bash, along with experience using automation tools.
• Familiarity with containerization and orchestration technologies (e.g., Docker, Kubernetes) is desirable.
• Strong knowledge of data processing frameworks (e.g., Apache Spark) and data pipeline automation tools.
• Expertise in data warehouse solutions and emerging data lakehouse architectures.
• Experience with AWS technologies is a plus, especially AWS Redshift and AWS SageMaker, as well as similar tools on other cloud platforms.
• Understanding of machine learning model deployment and monitoring tools.

Experience:

10 years required

Skills:

DevOps, Software Development, Agile Development, Data Analysis, English

Job type:

Full-time

• Work with team to deliver software with quality and on plan.
• Work with stakeholder to solve blocking issue with team.
• Define technology roadmap/strategy based on direction and distribute to team level.
• Build team capability to follow technology roadmap/strategy.
• Do resource planning and recruit Developer/SA/BA staff based on hiring strategy.
• Understand and adapt Web Front End Architecture, Microservice Architect, Event-Driven Architecture, Container Orchestration and Cloud technology to deliver software.
• Understand and adapt Agile methodology/DEVOPS in software development.
• Build team culture to be great place to work.
• Supervise/mentor/coach team member to archive the goal/objective and improve skills as their personal development plan.
• Bachelor's in Computer Science or related field.
• 10+ years experience with proven track record of successfully leading teams in delivering high-quality software on schedule while ensuring adherence to project plans and specifications.
• Experienced in solution delivery process with proven record.
• Experienced in Agile methodologies, DevOps adaptation.
• Ability to define and articulate a clear technology roadmap and strategy that aligns with organizational goals, effectively communicating this vision to team members.
• Experience in fostering team capabilities to follow the technology roadmap, including organizing training sessions and providing resources for skill development.
• Strong background in resource planning and executing hiring strategies to recruit Developers, System Analysts, and Business Analysts, ensuring the team has the right mix of skills and expertise.
• Good English proficiency.
• CP AXTRA | Lotus's
• CP AXTRA Public Company Limited.
• Nawamin Office: Buengkum, Bangkok 10230, Thailand.
• By applying for this position, you consent to the collection, use and disclosure of your personal data to us, our recruitment firms and all relevant third parties for the purpose of processing your application for this job position (or any other suitable positions within Lotus's and its subsidiaries, if any). You understand and acknowledge that your personal data will be processed in accordance with the law and our policy. .

Skills:

Salesforce, Cloud Computing, English

Job type:

Full-time

• Manage enterprise organisations across a range of industries to understand their challenges and goals through focused discovery sessions and workshops in both Thai and English.
• Work closely with current customers and prospective customers as a trusted advisor to deeply understand their unique company challenges and goals.
• Build trusted relationship with senior executives and key decision makers across Business and Technology.
• Able to create the first level of Business Architecture and engage Business/ IT on it.
• To develop and deliver innovative custom solutions, including solution concepts to key decision makers to address their business issues and needs aligned to business value.
• Coordinate and lead the entire solution cycle through close collaboration with a broad range of supporting technical and business resources.
• To fully understand and clearly articulate the unique benefits of Salesforce to a wide range of customer stakeholders from front line staff right up to C-level executives.
• Present compelling Salesforce & partner solutions while supporting relationships with customers and partners.
• Display initiative, self motivation and deliver high quality results along with meeting all expectations for both internal and external customers.
• Have a strong interest in growing your career and participating in our internal training programs and mentorship initiatives.
• Must have a proven track record in the development and delivery of differentiated custom solutions and presentations, including technical concepts, to key decision makers to address their business issues and needs.
• Ability to orchestrate a sales cycle which requires involvement of multiple internal and external resources.
• B.S. Computer Science, Software Engineering, MIS or equivalent work experience.
• Exposure to Design Thinking, Consulting methodologies and Enterprise Architecture would be an added advantage.
• A broad understanding of and ability to articulate the benefits of Cloud Computing, SFA, Service & Support, Marketing and Mobile solutions.
• Business case/value engineering experience to drive compelling points of view.
• Knowledge of related applications, relational database and web technology.
• Solid oral, written, presentation, collaboration and interpersonal communication skills and relationship skills.
• Ability to work as part of a team to solve technical problems in a varied environment.
• Translate these needs into a compelling vision and roadmap for our customers.
• Translating/Presenting/Understanding the unique business requirements of customers within multiple industries.
• Track record of solution engineering, consultancy, delivery or training success for a software solution organisation. We are open to a variety of backgrounds for the role.
• Proven time management skills in a dynamic team environment.
• Ability to work as part of a team to solve problems in varied, fast paced environments.
• Inquisitive, practical and passionate about technology and sharing knowledge.
• Good at searching out information and experimenting, likes to concentrate on a particular topic and to solve puzzles.
• Good at explaining ideas and finding ways to keep people s attention.
• Knowledge of Salesforce will be an added advantage.
• Fluency in Thai and English is a must to communicate with customers.
• Accommodations.
• If you require assistance due to a disability applying for open positions please submit a request via this Accommodations Request Form.
• Posting Statement.
• At Salesforce we believe that the business of business is to improve the state of our world. Each of us has a responsibility to drive Equality in our communities and workplaces. We are committed to creating a workforce that reflects society through inclusive programs and initiatives such as equal pay, employee resource groups, inclusive benefits, and more. Learn more about Equality at www.equality.com and explore our company benefits at www.salesforcebenefits.com.
• Salesforce is an Equal Employment Opportunity and Affirmative Action Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender perception or identity, national origin, age, marital status, protected veteran status, or disability status. Salesforce does not accept unsolicited headhunter and agency resumes. Salesforce will not pay any third-party agency or company that does not have a signed agreement with Salesforce. .
• Salesforce welcomes all.

Job type:

Full-time

• Date: 25 Jan 2025 Location: Chonburi, Sriracha (ชลบุรี), Thailand, 20230
• EXPERIENCE.
• Experience in furnace and boiler on previous aspect such as operation/generation, hardware components, controlling & safeguarding short coming etc.
• Good teamwork, communication, motivation, cross functional collaboration and adaptability.
• Good skill of MS. Office program.
• Good skill of English language.
• EDUCATION.
• Bachelor or higher in Chemical Engineering, Chemical Technology., Petrochemical Engineering. or equivalent.
• OTHER REQUIREMENTS (FOR RECRUITMENT).
• ROLE & RESPONSIBILITY (FOR RECRUITMENT).
• To provide comments, advice and guidance on operation or fired heaters/boilers and other relate equipments in order to achieve the most efficient, safe and economic operating.
• To initiate a test in order to improve fired heaters and boilers to achieve the most efficient in terms of energy & loss, safety and environment concerns, and control/maintain equipment at engineering standard design and safety requirement.
• To provide and update combustion information system and also initiate improvement project on fired heaters/boilers.

Skills:

Software Development, TypeScript, MongoDB, English

Job type:

Full-time

• Collaborate with the product team to ensure effective implementation of products.
• Perform full lifecycle software development, from design to testing.
• Take ownership and accountability for assigned tasks and projects.
• Design, code, document, and test software using accepted languages and frameworks.
• Follow established coding standards and processes.
• Commit to delivering high-quality products to end-users.
• Bachelor's degree in Computer Science, Engineering, or related field.
• At least 3-5+ years of relevant work experience in software development.
• Professional proficiency in written and verbal English.
• Demonstrated track record in building efficient and scalable architectural solutions.
• Strong expertise with Javascript, ECMAScript, and Typescript.
• Strong expertise with backend technologies and Node.js runtime.
• Strong expertise with React and frontend technologies.
• Preferred experience with NestJS and Next.js.
• Knowledge of design patterns, object-oriented programming (OOP), and functional programming concepts.
• Experience with backend performance optimization.
• Experience in handling, configuring, optimizing, and monitoring MongoDB, PostgreSQL, Elasticsearch.
• Experience in test automation techniques.
• Experience in REST and third-party API integrations.
• Familiarity with secure software development practices.
• Exposure to DevOps practices.
• Exposure to collaborating tools like GitHub, JIRA, Confluence.
• Compensation and Benefits.
• Competitive base salary.
• 10 days of annual leave in the first year, growing by 1 day per year to 15 days per year.
• 5 days of business leave.
• 10 - 20% Share of commission from owner and client referral.
• Health insurance on top of standard social security.
• BOI-sponsored visa & work permit for expats.
• Work Culture.
• International work environment and culture.
• 5 work days per week with 2 days work-from-home.
• Open communication that encourages feedback and idea-sharing.
• Innovative mindset that empowers creativity and new ideas.
• Established and defined career paths.
• Monthly Celebration & Parties.
• Company Values.
• Customers & Partners First.
• Integrity & Reliability.
• Team Collaboration & Innovation.
• Proactive Ownership.
• Performance Culture: Work hard, have fun, make history.
• Send your application now!.
• Please email your updated English CV to [email protected] using the format below.
• Email Subject: Senior Software Engineer - [Your Name].
• Please introduce yourself and answer the following questions in English.
• Relocation is mandatory. Are you comfortable relocating to Thailand?
• Why is this position interesting for you?
• What experience and skills will you bring to make you successful in this position?
• What is your current salary and your expected salary range?
• When can you start?.

Job type:

Full-time

• วางแผน ควบคุม และดำเนินการโครงการที่ได้รับมอบหมายให้แล้วเสร็จตามแผน.
• ศึกษา, ออกแบบและดำเนินงานก่อสร้างงานปรับปรุงอุปกรณ์ต่างๆ ตาม Engineering Request.
• จัดทำและปรับปรุง Terminal Standard ให้ทันสมัยเหมาะสมกับการใช้งาน.
• วางแผนงานซ่อมบำรุงรักษาเครื่องจักร, อุปกรณ์ต่างๆ, ถังบรรจุน้ำมัน เพื่อรองรับงานปฏิบัติการภายในคลังและให้เป็นไปตามมาตรฐานและกฎหมายกำหนด.
• ประเมิน วิเคราะห์ข้อมูล และนำมาปรับปรุงพัฒนากระบวนการให้มีประสิทธิภาพ.
• รับผิดชอบต่ออาชีวอนามัย และความปลอดภัยของตนเองและเพื่อนร่วมงานตลอดจนตระหนักถึงผลที่เกิดขึ้นจากการปฏิบัติและไม่ปฏิบัติที่มีผลต่อประสิทธิผลของงานการจัดการด้านอาชีวอนามัย ความปลอดภัย สิ่งแวดล้อม และพลังงาน.
• ปริญญาตรีหรือปริญญาโทวิศวกรรมศาสตร์ สาขาวิศวกรรมเครื่องกล หรือสาขาที่เกี่ยวข้อง.
• มีประสบการณ์ในการออกแบบ ก่อสร้าง และแก้ไขปัญหาทางวิศวกรรมของอุปกรณ์ในโรงกลั่นน้ำมัน หรือโรงงานปิโตรเคมี หรืองานด้านวิศวกรรมที่เกี่ยวข้อง เป็นเวลา 2 - 4 ปี.
• มีทักษะเกี่ยวกับงานออกแบบ ระบบ/อุปกรณ์ในอุตสาหกรรมปิโตรเลียมหรือปิโตรเคมี มีความสามารถในการทำงานเป็นทีมด้วยใจบริการ มีความเป็นผู้นำ มุ่งมั่นอุทิศเพื่อองค์กร ใฝ่รู้ สามารถปรับตัวและสร้างสรรค์สิ่งใหม่ ตระหนักถึงความปลอดภัย อาชีวอนามัย สิ่งแวดล้อมและสังคม.
• หากมีใบประกอบวิชาชีพวิศวกรรมจะได้รับการพิจารณาเป็นพิเศษ.

Skills:

Cloud Computing, RESTful, JSON

Job type:

Full-time

• Bachelor or master s degree in computer and Telecommunication Engineering, Computer Science, IT or in a related field.
• 8 - 13 years of experience in the Computer or Telecommunication field.
• Good Knowledge on cloud computing & edge computing technology.
• Good understanding on infrastructure technic that related of TCP/IP, Switch, Router, Firewall, LBS, and DNS.
• Good understanding technic that related of IoT/M2M/MEC Network Protocols - HTTP, HTTPS, Restful, MQTT, COAP, JSON objects, API, SNMP.
• Operating System knowledge: Linux-Redhat, CenOS, Windows Server.
• Database knowledge - Mongo DB, NoSQL DB, SQL, PostgreSQL.
• Good understanding of Docker and Kubernetes operations.