Filter Jobs

Skills:

AutoCAD

Job type:

Full-time

• ออกแบบระบบวิศวกรรมเครื่องกล เพื่อให้อาคารสามารถใช้งานระบบได้อย่างมีประสิทธิภาพ ประหยัดพลังงาน ง่ายต่อการดูแลรักษาและประหยัดค่าใช้จ่ายในการซ่อมบำรุง และเพื่อให้ระบบมีความเสถียรมั่นคงและปลอดภัย ถูกต้องตามมาตรฐานและกฏหมายที่เกี่ยวข้อง.
• ประชุมและประสานงานด้านการออกแบบ กับผู้ออกแบบที่เกี่ยวข้อง และผู้บริหารและควบคุมโครงการและผู้รับเหมา และฝ่ายจัดซื้อ.
• งานอื่นๆ ตามที่ได้รับมอบหมาย.
• ปริญญาตรี สาขา วิศวกรรมเครื่องกล.
• มีประสบการณ์ในการทำงานที่เกี่ยวข้องอย่างน้อย 2-10 ปี ขึ้นไป ด้านออกแบบและควบคุมงานระบบเครื่องกล.
• มีความรอบรู้ในส่วนงานระบบประกอบอาคารอื่นๆ ที่เกี่ยวข้อง มีความเข้าใจระบบงานก่อสร้าง.
• มีทักษะในการใช้โปรแกรม AutoCAD เขียนแบบวิศวกรรมได้เป็นอย่างดี.
• มีทักษะตรวจสอบแบบงานระบบวิศวกรรมเครื่องกล.
• สามารถสื่อสารภาษาอังกฤษได้.

Experience:

3 years required

Skills:

Mechanical Engineering, AutoCAD, Instrument, English

Job type:

Full-time

• Preparing, maintaining, monitoring, analyzing, and troubleshooting of power plant equipment as rotating machine, accessories machine and piping.
• Controlling and reducing the maintenance costs to have production effectiveness within the specified limits.
• Analyzing and solving machinery problems in normal and urgent situations/cases or on-call for continuous operation of machinery.
• Studying to propose the most appropriate solution for maintenance activities to be further leveraged.
• Monitoring the environmental system.
• Job Qualifications.
• Bachelor s degree or higher in Mechanical Engineering.
• Minimum 3 years experience in mechanical maintenance (New graduate who is a high-potential and seeking for job challenging is also welcome).
• Experience in power plant would be an advantage.
• Good Mechanical understanding of Industrial plant and power plant.
• Proficiency in Auto CAD, PLC, DCS, Scada, instrument, control valve and analyzer.
• Good command in English (Minimum 500 TOEIC score).
• Ability to work on-call on weekends and holidays.
• Goal-Oriented, Unity, Learning, Flexible.

Experience:

5 years required

Skills:

Mechanical Engineering, AutoCAD, English

Job type:

Full-time

• Performing site selection and major equipment selection.
• Accomplishing conceptual plant layout, system process mechanical diagram and preliminary calculations.
• Participating in the review of EPC contract specification and negotiation.
• Writing and reviewing technical specifications for power plant equipment and systems.
• Undertaking and reviewing calculations for equipment and systems.
• Designing and reviewing the drawings.
• Performing equipment sizing and selection including bid evaluation.
• Conducting and reviewing specification to comply with EIA and environmental law/ regulation.
• Job Qualifications.
• Bachelor s degree or higher in Mechanical Engineering.
• Minimum 5 years experience inside the leading engineering consulting company or large engineering department and/ or large maintenance department in power plant, petroleum or petrochemical field.
• Ability to review mechanical system design, evaluate and select mechanical system and equipment in power plant, support project development and execution.
• Experience in construction work would be an advantage.
• Strong leadership skills and excellent communication skill.
• Proficiency in Auto CAD, PLC, DCS, Scada, instrument, control valve and analyzer.
• Good command in English (Minimum 500 TOEIC score).
• Ability to control safety in the existing plant and construction tasks.
• Goal-Oriented, Unity, Learning, Flexible.

Experience:

5 years required

Skills:

Assembly, English

Job type:

Full-time

• Take ownership for Environmental, Health and Safety (EHS) issues on site for the company s undertaking.
• Lead and coordinate erection and assembly activities in accordance with time schedule and cost estimate.
• Coordinate erection/assembly activities in accordance with valid instructions, check lists, specifications and regulations.
• Reports technical investigations (non-conformance reports).
• Participate in order specific reviews for larger project.
• Reports or updates on product related faults and improvements and gives feedback to product line responsible.
• Supervision and co-ordination of consultants, contractors, and customer staff.
• Keep availability of all training courses and certificates e.g. LOTO, Electrical Safety at Work, H2S, Confined spaces, Hot work and First aid.
• be available for field service assignments.
• follow established safe work methods and ensure that the work is carried out in accordance with valid EHS regulations.
• always act as an ambassador within Siemens Energy. Always collaborate and communicate with our internal customers.
• collaborate with foreign colleagues, third party and customer personnel in a respectful and professional manner.
• practice Siemens ownership culture and take responsibility for a task or a fault until it is addressed accordingly.
• What You Bring.
• Bachelor s degree in mechanical engineering, Aerospace Engineering, Marine Engineering or any related field.
• Minimum 5 years working experience in gas turbine or related engineering field.
• Ability to handle pressure and have service mind.
• Communication and problem-solving skills.
• Good command of English both written & spoken skills and proficient in MS Office.
• Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet.
• Who is Siemens Energy?.
• At Siemens Energy, we are more than just an energy technology company. We meet the growing energy demand across 90+ countries while ensuring our climate is protected. With more than 94,000 dedicated employees, we not only generate electricity for over 16% of the global community, but we re also using our technology to help protect people and the environment.
• Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.
• Find out how you can make a difference at Siemens Energy: https://www.siemens-energy.com/employeevideo.
• Our Commitment to Diversity.
• Lucky for us, we are not all the same. Through diversity, we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character - no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences.
• https://jobs.siemens-energy.com/jobs.

Experience:

No experience required

Skills:

Mechanical Drawing, Electrical Engineering, English

Job type:

Full-time

• On duty and take responsibility when absence DC operation manager.
• Quality assurance of Technician work performed along with associated documentation.
• Maintenance of supply and tool inventory used by MEP system.
• Management and reporting of Technician hours worked.
• Ensure compliance of policies and procedures by Technicians.
• Mentoring and leadership on data center floor for technicians.
• Support of construction, research, and development activity.
• Good understanding of electrical and mechanical systems that may be employed in a data center environment. This may include electrical feeders, transformers, generators, switchgear, UPS systems, DC power systems, ATS/STS units, PDU units, air handling units, cooling towers, and fire suppression systems.
• Must be familiar with safety requirements and OSHA regulations governing a multi-megawatt facility.
• Interpret wiring diagrams, schematics, and electrical drawings.
• Job Qualifications.
• Familiar with Microsoft Suite, BMS, EPMS, CPMS and CMMS.
• Travel may be requested by GSA.
• The data center is a 24 hour/7 day operation.
• Excellent verbal, written, and interpersonal communication skills.
• Ability to express ideas clearly, concisely and effectively with contractors installing, performing maintenance or upgrade work on systems installed in the data center environment.
• Ability to analyze and make suggestions for problem resolution.
• Solve problems with good initiative and sound judgment.
• Make decisions independently with minimal guidance.
• Creativity, problem solving skills, negotiation and systematic thinking.
• Fluent in English both written and verbal (Minimum 500 TOEIC score).
• Goal-Oriented, Unity, Learning, Flexible.

Experience:

3 years required

Skills:

English

Job type:

Full-time

• Responsible for planning preventive maintenance schedules for air condition & Fire protection systems.
• Responsible for coordinating and managing vendors and suppliers to preventive maintenance and payment plans.
• 2nd Level support to Data Center Operation (FOC), on site to solve Incident and Problem management.
• 2nd Level support to engineer team all site, Data Center (TT1, TT2, MTG, BNA).
• To create & update reports and documents to comply with ISO 20k, 22k, 27k, 50k & TCOS standards.
• Review PUE, cost saving energy and report.
• Measured Efficiency air system and record annual report.
• Responsible for implementation of Mechanical such as comfort air, precision air.
• Responsible for implementation of Fire suppression such as FM200, NOVEC, CO2, Fire Sprinkler, Fire Pump, Fire alarm, and Vesda.
• Working period office time 9:00 - 18:00 and able to standby on call or onsite to work on holiday.
• Bachelor degree of Engineering, Mechanical engineering or related field.
• At Least 3 years experience in maintenance air conditioning such as comfort air, precision air, chiller air cool, water cool, pump motor: implement and support for mechanics-air condition systems in buildings or Data Centers.
• At least 1 years experience in designing air conditioners such as comfort air, precision air, chiller air cool, water cool, pump motor: implement, and support for mechanics-air condition systems in building.
• Able to Air - Diagram and Psychrometric chart knowledge.
• Able to work as a team and work in and standby on call on holiday.
• Able to work overtime if required and a hotline arrives (Less than 1 hour on site from your home).
• Proficiency in English communication is beneficial.
• Work Location: TrueIDC - Bangna Site (KM26).

Experience:

5 years required

Skills:

Legal, Purchasing, Research, English

Job type:

Full-time

• After a first phase during which you will become familiar with the functions and applications of our product ranges, as well as with their national and international legal and quality standards, you will be in charge of design and re-engineering.
• Establish the specification sheets for new products together with the marketing and quality departments.
• Evaluate the economic factors related to the manufacturing process and to the product performance objectives.
• Contribute to pre-design the products and select their manufacturing process together with the R&D and production departments.
• Follow the design process as specified by the company (ECR & PDR).
• Select the suitable materials together with the purchasing and quality departments.
• Research the selected materials mechanical properties and validate them with the quality department.
• Establish the calculation formulas and parameter the computation software.
• Calculate the mechanical performance by using scientific/mathematic computations.
• If necessary, outsource some calculations to universities or research centers.
• Optimize the design and complete the drawings.
• Document the design process to guarantee traceability and auditability.
• Coordinate with other departments to compare calculation results and test results.
• Become our Technical Expert Conduct researches in order to update our database of technical information.
• Verify the calculation notes of existing products whenever there is a change in their dimensions or material properties.
• Identify and analyze issues that may arise either during the manufacturing process or with the finished product.
• Define the resources (Human, software, hardware) that our Engineering Department needs to cope with the company s development plans.
• Qualification Requirements: Education: Bachelor or Master of mechanical engineering from university in local.
• Experience: At least 5 years in a research or technical design field.
• In-depth knowledge of continuum mechanics.
• Knowledge of steel and cast iron properties and materials mechanics equations.
• Knowledge of properties of other metals or composite materials would be a plus.
• Familiar with SolidWorks software (Finite elements method would be a plus).
• Good command of spoken and written English.
• Familiar with principles and methods for research.
• Problem solver, detail oriented and innovator.
• Ability to work in a team environment.
• Interpersonal and organizational skills.

Experience:

7 years required

Skills:

Compliance, Procurement

Job type:

Full-time

• Periodically review the static equipment/piping/pipeline/PSV inspection strategies and surveillance tasks for their effectiveness and efficiency to achieve integrity and cost-efficiency.
• Act as the owner of the static equipment/pipeline/PSV in the asset plan and maintenance reference plan.
• Develop inspection & maintenance program for static equipment, piping/flowline, pipeline, and PSV (Risk Based inspection and schedule corrective inspection).
• Ensure compliance of static equipment/piping/pipeline/PSV inspection activities against the integrated activity planning process.
• Plan, supervise and execute for vessel and heat exchanger cleaning, in-line inspection and PSV maintenance.
• Plan, supervise and control for corporate lifting color code, lifting equipment, cargo carrying unit and accessories.
• Ensure that the short and medium term plans are realistic and execute accordingly, including corrective inspection, for offshore and onshore facilities.
• Analyze, evaluate, and assess the integrity after in-service inspection, and update RBI program as evergreen process.
• Conduct Fitness-For-Service assessment level 1 and provide the recommendation.
• Manage, follow up and close out the anomaly rectification, and update in integrity management.
• Key Accountabilities (Continued).
• Apply continuous improvement tools to drive improvements in safety, technical Integrity, reliability, availability, cost within the discipline.
• Provide discipline input to related changes throughout the engineering, procurement, construction, and commissioning.
• Develop and update documents, procedures, guideline, work instruction.
• Coordinate inspection schedule with contractors, planners, site inspection supervisors and other related parties.
• Review work list, ITP, work procedure, and prepare related drawings & specifications for work execution.
• Prepare bid package and perform bidding evaluation.
• Manage services contract in related to inspection and/or integrity management.
• Supervise contractor for inspection, maintenance, repair, and operations activities including troubleshooting and support to site inspection team.
• Provide input in technical reviews including RBI, FRACAS (RCA), etc.
• Promote the implementation of company s SSHE policy and regulations in all works under responsibility.
• Professional Knowledge & Experiences.
• Bachelor s degree in mechanical or metallurgical engineering or any related.
• Minimum 7 years of experience in asset integrity management for in-service inspection, maintenance of static equipment, pipeline and PSV in oil and gas industry or petroleum or petrochemical industry.
• Experience working with static equipment and/or pipeline of which planning / in-service inspection / integrity assessment / anomaly management such as pressure vessel / heat exchanger / piping / pipeline inspection and integrity assessment, etc.
• Expertise in troubleshooting and failure analysis of static equipment and/or pipeline.
• Knowledge of static equipment and/or pipeline design principles, operation, and maintenance.
• Knowledge of Risk Based Inspection, General NDE and Advanced NDE.
• Knowledge in metallurgy, welding, and corrosion.
• Professional Knowledge & Experiences (Continued).
• Knowledge of applicable standards and codes such as ASME, API, ISO, e.g. API510, API570, API579-1/ASME FFS-1 and used widely for static equipment and/or pipeline.
• Able to develop work procedure / standard practice.
• Able to work in offshore/ onshore field during inspection campaign.
• Effective coordination skill to liaise with other functions.
• Good attitude, excellent communication, and collaboration skills.
• Good command of spoken and written English. Minimum TOEIC score 750.
• Be able to work up-country in company location such as Kamphaengpetch, Songkhla etc.

Experience:

3 years required

Skills:

Assembly, CAD

Job type:

Full-time

• Supervise Technician to support company goals.
• WI, Control plan, PFMEA and FA documents support.
• Continuous process improvement activities utilizing wide variety of analytical techniques (such as SPC, DOE, Gauge R&R), lean manufacturing and six sigma concepts.
• Leader in Product quality improvement, DFM, DFA, Engineering Evaluation.
• Process out control for problem solving.
• Evaluation of new material or component part use in production.
• Evaluation and develop Process and new Technology.
• Overseas travel is required, ~30% work load.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Typical Experience.
• 3+ years Experience in die bonding, flip chip attach, glob top, underfill, and die attach process development.
• Work Experience and understand in optoelectronics assembly, microelectronics assembly.
• Strong Knowledge of transceiver, modulator is an advantage.
• Hands-on experience in machine set-up and operation for die bonders (DataCon, MRSI, Finetech, Amicra) is an advantage.
• Proficient in root cause and failure mode Analysis.
• Familiar with cleanroom and ESD protocols.
• Knowledge of Auto CAD 2D, 3D or Solid work program.
• Excellent interpersonal skills and demonstrated communication skills.
• Self-motivated, proactive and innovative problem-solving capabilities, Management skill and Presentation skill.
• Typical Education.
• Bachelor or Master degree in Mechanical, Mechatronic, Electronics or relates Engineering degree.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Skills:

Project Management, Problem Solving, Assembly, English

Job type:

Full-time

• Review process, product and identify the new technology, new component, new process. Then provide a solution and development for the new component/ new process/ new technology for PCBA..
• Project management for the development and key contact for customers and internal communication..
• Work closely with the design team, customers, supplier, and CTH internal team..
• Centralize for chemical qualification across the site..
• Work with CFT and customer on NPI development, process validation with FA lab technique to make successful transfer from NPI to mass production..
• Work with CFT on problem solving, root cause analysis to improve quality yield and prevent in field failure..
• Provide the technical consultant / FA lab result to CFT and customer for process/ material issue / Reliability.
• Knowledge/Skills/Competencies.
• Knowledge in NPI, new product, new process and new component qualification..
• Skilled in lab analysis and able to interpret the result link to PCBA and/or material issues..
• Good leadership and self-motivation.
• Fluent in English and communicate well..
• Typical Experience.
• 7-10 years of work experience in PCBA manufacturing with good knowledge of SMT, wave soldering, pressfit and mechanical assembly..
• Typical Education.
• Bachelor degree or Master degree in Material engineer, Chemical Engineer or Mechanical Engineer.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

5 years required

Skills:

Automation, Assembly, AutoCAD, English

Job type:

Full-time

• Concept and architect automation stations and assembly lines.
• Analysis and the creation of User Requirement Specification (URS) in order to determine feasibility of using one or more machines.
• Perform engineering calculations with respect to cycle time, strength of materials, speeds, horsepower, temperature, pressure, force, etc.
• Analyze engineering drawings (mechanical and electrical) and specifications to determine if it meets process and products specifications.
• Formalize and update drawing documentation.
• Work with Celestica Global Machinery Standards.
• Liaise with vendors (local and abroad) for technical information and specifications.
• Communicate all requested design changes to various teams (within Celestica).
• Knowledge of AutoCAD and SolidWorks is an asset.
• Understanding of machinery safety and safety devices.
• Understanding of the use of pneumatics and hydraulics.
• Understanding of the use of electrical and motion devices (i.e. servo, VFDs, switches, load cells, etc.).
• Experience with robotic programming is an asset.
• An understanding of machine vision (2D, 3D and machine learning) as it applied to automation stations for identification, quality, robotic offset and alignment.
• Concept and architect automation stations and assembly lines.
• Analysis and the creation of User Requirement Specification (URS) in order to determine feasibility of using one or more machines.
• Perform engineering calculations with respect to cycle time, strength of materials, speeds, horsepower, temperature, pressure, force, etc.
• Analyze engineering drawings (mechanical and electrical) and specifications to determine if it meets process and products specifications.
• Formalize and update drawing documentation.
• Work with Celestica Global Machinery Standards.
• Liaise with vendors (local and abroad) for technical information and specifications.
• Communicate all requested design changes to various teams (within Celestica).
• Knowledge of AutoCAD and SolidWorks is an asset.
• Understanding of machinery safety and safety devices.
• Understanding of the use of pneumatics and hydraulics.
• Understanding of the use of electrical and motion devices (i.e. servo, VFDs, switches, load cells, etc.).
• Experience with robotic programming is an asset.
• An understanding of machine vision (2D, 3D and machine learning) as it applied to automation stations for identification, quality, robotic offset and alignment.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Typical Experience.
• Minimum 5 years in automation design at a machine integrator, or equivalent, designing and concepting machines from small table top to large stations.
• Basic knowledge of printed circuit board assembly/electronics manufacturing are an asset.
• Fluent in English.
• Able to work based in Laem Chabang, Chonburi, Thailand.
• Typical Education.
• Degree in Mechanical Engineering/ Electrical Control Engineering / Robotics/ Mechatronics Automation Technology or related field.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

3 years required

Skills:

Assembly

Job type:

Full-time

• Design, develop, and implement new manufacturing processes to support customer products.
• Develop application software and tooling for a comprehensive set of complex machines and mechanical process steps within a manufacturing sector.
• Implement plan and lead the assessment of the capability of machines and process applications using Design of Experiments and statistical methods across the full manufacturing process, ensuring maximum utilization of critical resources, maximum through ...
• Lead disciplined process for solving complex single stage or multistage product, process, component, and related problems that affect the efficient operation and/or manufacture of products through the full manufacturing process.
• Initiate and lead the assessment and provide feedback to product designers on suitability of designs for manufacturability.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Typical Experience.
• 1 to 3 years of related experienc;Experience in similar job roles.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

5 years required

Skills:

Contracts, Compliance, Project Management

Job type:

Full-time

• Oversee and coordinate the maintenance and operation of critical infrastructure systems, including but not limited to HV and LV distribution systems, associated plant/equipment, HVAC mechanical cooling/heating systems, fire protection and suppression systems, and electrical and mechanical systems within the portfolio of buildings.
• Manage maintenance contracts and monitor contractor performance to ensure compliance with service level agreements.
• Provide technical support to the maintenance and operations teams, ensuring that all ...
• Monitor and optimize the performance of critical infrastructure systems, ensuring that they operate at peak efficiency and reliability.
• Develop and implement maintenance programs and procedures to ensure that critical infrastructure systems are maintained in accordance with best practice standards.
• Prepare and maintain accurate records of all maintenance and engineering work, including maintenance schedules, work orders, and engineering drawings.
• Develop and maintain relationships with key stakeholders, including Facilities Managers, the Client's staff and representatives, contractors, and suppliers.
• Participate in emergency call-out roster providing cover for weekend and team member absences, as required.
• Volunteer ideas/initiatives that contribute to the service levels and delivery.
• Undertake other tasks, as required by the Client, in accordance with experience and competencies.
• Diploma or Bachelor's degree in Mechanical/Electrical Engineering or related field.
• Minimum of 5 years of experience in critical environment operations and maintenance.
• Experience in managing maintenance contracts and monitoring contractor performance.
• Strong technical knowledge of critical infrastructure systems, including but not limited to HV and LV distribution systems, associated plant/equipment, HVAC mechanical cooling/heating systems, fire protection and suppression systems, and electrical and mechanical systems.
• Excellent problem-solving skills, with the ability to identify, diagnose and solve technical issues.
• Excellent communication skills, with the ability to communicate technical information to non-technical stakeholders.
• Strong project management skills, with the ability to manage multiple projects simultaneously.
• Knowledge of safety and environmental regulations and standards.
• Ability to work under pressure and in a fast-paced environment.

Experience:

5 years required

Skills:

Compliance, Legal, ERP, English

Job type:

Full-time

• Ensure compliance with legal and company safety and environmental regulations to provide a safe, eco-friendly working environment.
• Integrate sustainability practices into health, safety, and environmental policies and procedures.
• Lead by example to achieve accident-free workplace.
• Develop and execute health and safety plans, incorporating preventative measures and addressing risks proactively.
• Lead initiatives to reduce the plant s carbon footprint and energy consumption, aligning operations with corporate sustainability goals.
• Develop and implement programs to minimize waste, increase recycling, and optimize resource usage.
• Cultivate a culture of safety and environmental responsibility through employee training, awareness programs, policy enforcement and community engagement initiatives.
• Monitor and address safety risks or incidents, taking corrective and preventive actions promptly.
• Regularly monitor and report on environmental impact metrics, driving continuous improvement in sustainability performance.
• Collaborate with internal and external stakeholders to explore innovative solutions for sustainable manufacturing processes.
• Plant Operations and Production Management Plan, organize, and oversee daily plant operations to meet production goals and customer expectations.
• Optimize production capacity, flexibility, and asset utilization while minimizing unnecessary costs.
• Ensure equipment availability, reliability, and sustainability to maintain seamless operations.
• Oversee production output, product quality, and on-time delivery, ensuring alignment with company standards.
• Lead and coordinate maintenance activities to minimize equipment downtime, maximize capacity utilization, and optimize production output. Focus on reducing Mean Time Between Failures (MTBF) by effectively utilizing our Maintenance Management software.
• Collaborate with other department managers to achieve manufacturing objectives effectively.
• Monitor operational performance, analyze data, and implement corrective actions as needed.
• Develop and manage operational budgets (OPEX), ensuring cost control and financial accountability.
• Maintain and update operational ERP modules (e.g., BOM, routes, costs) for process efficiency.
• Process Improvement and Innovation Analyze production processes to improve safety, quality, productivity, and reliability while reducing waste and costs.
• Implement Lean Manufacturing, Just-In-Time (JIT), and other efficiency-enhancing methodologies.
• Propose and execute continuous improvement initiatives, modernization projects, and CAPEX investments.
• Oversee the implementation, testing, and performance measurement of new equipment and tools.
• Drive the industrialization of new products and modifications to existing processes.
• Quality Control Collaborate with Quality Managers to understand customer requirements and ensure high-quality production standards.
• Implement and enforce Quality Management Systems (QMS) aligned with Group standards.
• Promote a zero-defect mindset through effective quality control practices and continuous training.
• Resolve quality issues impacting production or customer satisfaction swiftly and effectively.
• Management and Leadership Lead internal communication by sharing company strategy, goals, and plant performance updates with employees.
• Enforce the company s Performance Management System, including setting KPIs, regular feedback, and career development plans.
• Work with HR to create learning and development pathways for team members.
• Develop workforce technical skills in key areas: robotics, industrial IT, preventive maintenance, advanced electrical and mechanical maintenance.
• Propose and implement organizational changes, staffing plans, and payroll budgets aligned with strategic goals.
• Build a culture of collaboration, continuous improvement, and accountability within the team.
• Nuclear Safety Ensure that nuclear safety is taken into account in decision making and actions, and that it always takes precedence over any other consideration.
• Use a balanced, rigorous, and prudent approach to decision making with respect to quality, cost, and schedule such that nuclear safety is never compromised.
• Ensure that involved personnel understand not only their own responsibilities and the consequences of mistakes, but also those of their immediate colleagues and how these responsibilities complement each other.
• Ensure that key operational and technical positions are filled by competent and knowledgeable persons that are empowered to speak openly.
• Adopt and encourage a questioning attitude, particularly when choices, or lack thereof, are presented.
• Challenge unsafe decisions, acts, behaviors, and conditions.
• Take prompt conservative and preventive actions when an incident that could affect nuclear safety is reported, even if not yet fully understood or documented.
• Communicate transparently to the Board of Directors any issue which might compromise nuclear safety, including any human, technical or organizational issue.
• IT and Systems Integration Standardize and harmonize operational modules (e.g., BOM, routes) across industrial sites.
• Develop and deploy standardized reports to monitor performance and enhance data-driven decision-making.
• Leverage ERP and IT systems to support operational efficiency and reporting.
• Automation and Smart Manufacturing Develop and implement automation strategies to improve operational efficiency, productivity, and safety.
• Identify and prioritize opportunities for robotics, artificial intelligence (AI), and advanced manufacturing technologies to enhance plant performance.
• Lead the integration of smart manufacturing systems, ensuring seamless operation with existing equipment and IT infrastructure.
• Collaborate with cross-functional teams to automate repetitive tasks, reduce human error, and streamline workflows.
• Monitor and evaluate the performance of automated systems, driving continuous improvement through data analytics and predictive maintenance.
• Build technical expertise within the team to support the implementation and maintenance of automation technologies.
• Stay informed of emerging trends in Industry 4.0 and smart manufacturing, proposing initiatives to maintain a competitive edge.
• Ensure automation solutions align with sustainability goals by optimizing energy use and reducing waste.
• Qualifications Master s degree in Mechanical, Industrial, Manufacturing, Production Engineering, or related field.
• Additional certifications in Lean Six Sigma, Supply Chain Management, or Production and Inventory Management (e.g., CPIM) are a plus.
• A minimum of 10 years of experience in plant management or similar roles, including at least 5 years of proven success in team leadership in a manufacturing environment.
• Extensive knowledge of production processes, quality control systems, safety protocols, and supply chain management.
• Demonstrated success in implementing productivity enhancements, cost-saving measures, and safety improvements.
• Hands-on experience with Lean Manufacturing and Just-In-Time principles.
• Familiarity with technical drawings and the ability to translate them into actionable production plans.
• Experience in budget management, CAPEX planning, and resource allocation.
• Excellent command of English, both written and spoken, with the ability to communicate effectively at all organizational levels.
• Proficient in ERP systems for manufacturing operations and inventory management.
• Advanced skills in Microsoft Office Suite.
• Familiarity with production planning software and other digital tools used for process optimization is a plus.
• Key competencies: Exceptional leadership, communication, and organizational skills, with the ability to inspire and guide teams toward strategic goals.
• Strong analytical skills with a track record of data-driven decision-making and continuous improvement initiatives.
• Ability to manage multiple priorities effectively, adapt to dynamic environments, and meet tight deadlines.
• Strategic thinking and problem-solving skills to align plant operations with company objectives.

Skills:

Compliance, Assembly, Purchasing, English

Job type:

Full-time

• Specialist in plastic component and associated tool / mould: specifying, implementing, and qualifying the tool & manufacturing process in compliance with Schneider Performance System principles.
• Ensure the pourability and manufacturability of plastic components used in the assembly or fabricated process. Design choices based on industrial and technological capabilities to meet customers and Schneiders requirements (quality / delivery / cost).
• For new offer, ensures the manufacturability of the plastic component and tool. For ...
• Select, validate, introduce, and standardize new technologies/processes locally in plastic components domain.
• Define needs of new tool (renewal, capacity, productivity, localization) each year and review quarterly.
• Launch tools with technical and financial study then follow up according to the needs and schedule.
• Continuously monitor execution of projects,.
• Buy off tools, keep all related document and establish maintenance plan.
• Follow tool condition and perform tooling appraisal periodically with follow up actions.
• Maintain & manage tooling database via Vendor Tooling Management system.
• Support CS&Q, SCM, Production, Technical and Purchasing team for tooling aspects.
• Provide technical support to the factories.
• Ensure the robustness of our parts and tooling developed.
• Bachelor's degree in Tooling, Manufacturing, Mechanical Engineering, or related field or equivalent.
• 5 years or above experience in Molding / tooling industry in international manufacturing company.
• Tools/Molds management skills, Tooling issue solving skill, Tools/Molds structure, Stamping/Plastic/Die Casting process,.
• Material selection, Engineering drawing (ISO8015).
• Good command in Thai and English.
• Location: Bangpoo Industrial Estate, Samutprakarn, Thailand.
• Primary Location: TH-11-Samut Prakan.
• Schedule: Full-time Unposting Date: Ongoing

Skills:

Safety Management, Assurance, Sound Engineering, English

Job type:

Full-time

• Brenntag Safety, Health & Environmental and Process Safety Management Guidelines and Processes.
• Lead the local team in establishing process safety management system, standards, procedure and practices on-site.
• Provide on-site guidance and steers in new projects with good safety engineering and chemical knowledge, experience and skill sets.
• Support the Managing Director / Supply Chain Team in engineering and technical decisions through technical report / engineering specifications / engineering vendor packages reviews.
• Coordinate all process safety related and asset integrity works and activities according to Brenntag and International standards.
• Collaborate with local Operations/Logistics/QSHE Teams by providing process safety guidance in acquisitions, projects, modification and vendor/service provider/3PL/ contractor sourcing.
• Drives Brenntag Path-to-Assurance (PtA) program to successful implementation.
• Reports to Regional PSM Manager on site/facility s progress of process safety implementations.
• Set up and perform internal site process safety assurance program.
• Verify engineering and technical documents for safety assurance.
• Facilitate or organize process hazard analysis sessions.
• Provide guidelines on controls and safety requirements for HAC/ATEX zoning areas.
• Work closely with Operations / Logistics departments in maintaining all technical and engineering drawings are standardized and according to sound engineering practices and protocols.
• Conduct customer/contractors/3PL/service vendors audits with other departments, providing process safety and engineering perspectives.
• Conduct PSM trainings and investigations.
• Provide advice on maintenance regime (Preventive, Predictive, Corrective) management to ensure asset integrity, functionality and its availability for use.
• Implement process safety performance metrics and provide analysis for continuous improvement.
• Legal and Compliance.
• Liaison personnel for external interfaces e.g. with government agencies, to ensure license-to-operate that is process safety dependent be registered and renewed in timely manner. E.g. MHI / CIMAH / MHF licenses.
• Work closely with local QSHE Manager on process safety related matters such as fire safety, dust explosivity, toxic or hazardous releases, chemical reactivity/compatibility storage and handling, environmental control and protection compliance concerns.
• Govern the asset integrity requirements through mandatory inspections, statutory examination and professional services.
• YOUR PROFILE.
• Education: Minimum a Bachelor degree in Chemical / Process / Safety / Mechanical Engineering
• Minimum 15 years and above working experience.
• rack record of engineering design, Process controls and project management experiences.
• Experience in process safety management, human factors, design safety, HAC/ATEX, PHA facilitation, fire safety, hazardous materials and DG management.
• Working experience in the oil/gas/chemicals industry an advantage.
• Understanding of batch manufacturing process is a plus.
• Working experience in distribution and/or logistics an advantage.
• Experience in safety case regime an advantage.
• Adaptable to changes and has passion in SHE.
• Ability to inspire/influence and spearhead new initiatives and changes.
• Ability to work independently with minimum supervision.
• Good team player.
• Good planning, analytical, coordination and presentation skills.
• Good people management and communication skills.
• Good command in spoken and written English.
• INTERESTED?.
• We look forward receiving your application.

Experience:

No experience required

Skills:

Mechanical Engineering, Electrical Engineering, English

Job type:

Full-time

• Provide day to day installation, maintenance, and repair of all facilities in the data center.
• 24x7 shift work responsibility when qualified and designated.
• Provide requested reporting and documentation.
• Support of facility, development, and construction teams.
• Perform tasks as assigned by DC operation manager.
• Respond to customer requests, power, cooling, and facility audits.
• First tier investigate any power, communication, or cooling anomalies.
• Attend assigned meetings and training.
• Assist in ensuring customer compliance with GSA Acceptance Usage Policy (AUP).
• Provide technical escort when needed.
• Job Qualifications.
• Must be familiar with safety requirements and OSHA regulations or Thailand safety regulations.
• Basic understanding of electrical and mechanical systems that may be employed in a data center environment. This may include electrical feeders, transformers, generators, switchgear, UPS systems, DC power systems, ATS/STS units, PDU units, air handling units, cooling towers, and fire suppression systems.
• Familiar with Interpret wiring diagrams, schematics, and electrical drawings.
• Ability to express ideas clearly, concisely, and effectively with contractors performing maintenance or upgrades on systems installed in the data center environment.
• Excellent verbal, written, and interpersonal communication skills.
• Ability to analyze and make suggestions for problem resolution.
• Solve problems with good initiative and sound judgment.
• Creativity, problem solving skills, negotiation and systematic thinking.
• Fluent in English both written and verbal (Minimum 500 TOEIC score).
• Goal-Oriented, Unity, Learning, Flexible.