Filter Jobs

Experience:

5 years required

Skills:

Electronics

Job type:

Full-time

• Provide tester support to production.
• Monitor product test yields and feedback to related parties for corrective action in a prompt and timely manner.
• Collaborate with Debug team to find root cause of low yields.
• Verify that test equipment (hardware & software) is in proper working condition, and not the root cause of low yields.
• Participate in continuous improvement programs to improve test yield and reduce scraps.
• Document, control and maintain existing test production hardware and software (Including routine preventive maintenance and calibration on test equipment).
• Set up new test equipment (hardware & software), buy-off procedure before releasing to production.
• Document and update the test procedures. - Provide training of test process to production team.
• Provide training to functional test technicians on how to confirm test failures and maintain test equipment.
• Perform test line conversion (when applicable).
• Maintain in house test fixture.
• Review overall ICT test capacity of TEST ICT capacity vs demand analysis.
• Review ICT test requirement of NPI product.
• CCB coordinator.
• Perform other work-related assignments requested by supervisors.
• Change Management, ECO, limits, test steps, FW and ID programming.
• Knowledge/Skills/Competencies.
• Interpreting test requirements and documenting test procedures.
• Analyzing data to drive coverage enhancement and first pass yield improvement.
• Experience in Agilent 3070 and Flying Probe test platform supports/maintains.
• Capable to do test development on the Agilent 3070 machine and Flying Probe test platform.
• Ability to lead engineering projects and share the results.
• Typical Experience.
• Min. 5 years of hands-on working experience in large-scale In-circuit MFG ICT test support.
• Typical Education.
• Engineering Degree in Electronics or equivalent.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Skills:

Excel, Data Analysis, Product Development

Job type:

Full-time

• Manage my own category assortment and it implementation to reach targeted budget.
• Always seek opportunity to differentiate my own category. Keep update market trends, and customer feedback to identify opportunities for product assortment improvements.
• Understand store clustering and apply range, program to match with that, Review and update product by cluster and Range by cluster in own category to align with customer behavior, Store location and related market insight.
• Initial new product assortment on plan and execution with cross functional team and promoting product s brand in Lotus s.
• Work closely with cross-functional team and supplier to build impactful and viral promotion campaign, promotion strategy and promotion plan. Roll out in a right place and time.
• Improve the variety of space optimization and display range of each store cluster to increase product availability and also maximizing the return of profit regarding to space using. Propose idea to improve product display to attract customer.
• Monitor and analyze the periodic sales performance (daily, weekly and monthly). Finding solutions to close performance gaps with target.
• Manage stock (Stock provision, Know lost and clearance) to be the most benefit with company. Help Optimize space for stock.
• Manage other income from trade and in-store activity with integrity and accuracy.
• Work closely with other functions such as Customer, Trade Plan, Supply Chain, and Store Operations to ensure alignment and support E2E process and execution at store operation.
• A minimum of 5 years in Merchandiser experiences with Retail, FMCG or any other Dynamic Business company, Electronic company is welcome as well.
• Bachelor s degree or higher in any related fields.
• Extensive merchandiser experience would be an advantage.
• Product knowledge and passion.
• Excel (Expert level) skill.
• Report preparation and data analysis skill.
• Product range and trade planning.
• New product development.
• Presentation, Communication and team player skill.
• Category Development.
• Leadership skill and attribute.
• Growth Mindset.
• Entrepreneurial-ship mindset.
• Situation Leadership skill.
• Delegation skill.
• Agility and resilience.
• Initiative and creative thinking..
• CP AXTRA | Lotus's
• CP AXTRA Public Company Limited.
• Nawamin Office: Buengkum, Bangkok 10230, Thailand.
• By applying for this position, you consent to the collection, use and disclosure of your personal data to us, our recruitment firms and all relevant third parties for the purpose of processing your application for this job position (or any other suitable positions within Lotus's and its subsidiaries, if any). You understand and acknowledge that your personal data will be processed in accordance with the law and our policy. .

Job type:

Full-time

• Assortment planning & merchandising: develop portfolio in terms of assortment, styles and price points to understand the gaps and match demand and supply in the market
• Sellers management: acting as the main business advisor and account manager to a few of the biggest sellers on Lazada to ensure their sustainable growth on the platform through assortment and campaign planning as well as providing support and guidance to leverage platform tools
• Marketing & onsite management: working closely with cross-functional teams including ...
• Minimum of 1 years of professional experience, preferably in roles related to sales, account management, buyer, procurement, retail, or business development.
• Previous experience in industries related to commerce or sales, and direct client-facing roles are highly advantageous.
• Demonstrated proficiency in Microsoft Office suite, including Excel, Word, and PowerPoint, to effectively analyze data, create reports, and deliver compelling presentations.
• Possess a proactive "can-do" attitude, self-motivation, and a strong drive to achieve ambitious goals and targets.
• Excellent communication and interpersonal skills, with the ability to build and maintain strong relationships with SMEs partners and internal stakeholders.
• Strong in Negotiation skills and background of ecommerce and Account management
• Structure and Problem solving skills are a plus.
• Knowledge of Electronic Categories are a plus.

Experience:

8 years required

Skills:

Research, Product Design, Python, English

Job type:

Full-time

• 8 years experience in Test Development or related field.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Skills:

Electronics, Negotiation, Excel, English

Job type:

Full-time

• a mission we all believe in and aim towards achieving every day.
• To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always. At TikTok, we create together and grow together. That's how we drive impact.
• for ourselves, our company, and the communities we serve.
• Join us. The e-commerce industry has seen tremendous growth in recent years and has become a hotly contested space amongst leading Internet companies, and its future growth cannot be underestimated. With millions of loyal users globally, we believe TikTok is an ideal platform to deliver a brand new and better e-commerce experience to our users.
• Managing long-tail sellers (100+ Sellers) incubating them to become top GMV contribution sellers.
• Build and maintain relationship with merchants, negotiate and secure best deals based on campaign or seasonality.
• Develop seller capability in terms of contents and affiliate to accelerate seller's growth.
• Discover new collaborative opportunity fit into merchants' short-term and long-term development plan.
• Maintain service quality provided by seller.
• Lower cancelation and return rate, shipping LT, and other components to increase conversion rate and customer satisfaction.
• Minimum Bachelor's Degree or above.
• Excellent interpersonal and negotiation skills.
• Attention to detail, affinity with numbers and logical thinking.
• Proficient in English.
• Proficient in Excel and ppt.
• Preferred Qualifications.
• Fresh or up to 2 years experience in ecommerce; direct experience in relevant categories preferred; experience working with a mass group of sellers also preferred.
• Embracing a fast-paced environment in the E-commerce industry and flexibility.
• A good team player, fast learner and open to changes.
• Problem solving skills and a can-do attitude.
• TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Experience:

3 years required

Skills:

Electronics, English

Job type:

Full-time

• Under supervision and with assistance develop, qualify, and install test applications into manufacturing operations.
• Optimize the Test process focusing on productivity improvements to cycle time and yield.
• Debug of solutions provided by external vendors or customers based on training supplied.
• Assist with test optimization based on feedback from customers and operations partners based on a solid unstinting of the test coverage, diagnosability, reparability, firmware/diagnostics and user experience.
• Maintain with minimal supervision, the continuing performance of the Testers and participate in the OEE improvement plans, yield and test time optimization.
• Knowledge/Skills/Competencies.
• Good logical thinking and analytical skills.
• Good command of English and Thai speaking.
• Ability to work in Laem Chabang, Chonburi.
• Typical Experience.
• 0-3 years of working experience in testing and debug in both electrical and optical level.
• New graduated is welcome.
• Typical Education.
• Degree or higher in Telecommunication Engineering or Electronics Engineering.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

3 years required

Skills:

Research, Data Entry

Job type:

Full-time

• Work as a team member who understands/interprets technical problems and provides technical support.
• Solve assigned problems under guidance of more senior engineers.
• Research systems ideas and will draw up plans for these systems.
• Design, modify and implement systems that meet customer and Celestica needs.
• Create designs in line with Celesticas procedures, regulations and customer standards.
• Keep up to date with relevant industry knowledge and regulations.
• Solve complex problems.
• Liaison with suppliers, customers, contractors, and other internal teams.
• Recommend system modifications.
• Creation of an Electronic component library for simulation.
• Analysing and interpreting data and information.
• Creating Schematic simulation reports and documentation.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Knowledge in Analog circuit design and Digital circuit design.
• Knowledge in Electronic component.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 0-3 years of experience with hardware Design.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

15 years required

Skills:

Research, Electronics, Data Entry

Job type:

Full-time

• Design, develop and implement technical solutions in two or more technical areas. Lead smaller projects and may coordinate with other engineers including reviews of their work.
• Review and interpret customer documentation, conduct appropriate research, analysis and experiments with minimal direction from senior staff.
• Creates technical proposals (solution and timelines) based on requirements.
• Research systems ideas and will draw up plans for these systems.
• Design, modify and implement systems that meet customer and Celestica needs.
• Create designs in line with Celesticas procedures, regulations and customer standards.
• Keep up to date with relevant industry knowledge and regulations.
• Solve complex problems.
• Liaison with suppliers, customers, contractors, and other internal teams.
• Recommend system modifications.
• PCB layout Design, Schematic by using Allegro Candence Software.
• Participate in HW/Layout review.
• PCB stack up review.
• Work with the Electrical and Mechanical Engineers to ensure the design meets all requirements from an electrical performance and mechanical enclosure perspective.
• Create and export manufacturing files ( drawing, gerber ) and review DFM/DFT with Manufacturing team.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Bachelor s degree in Electronics Engineering, or equivalent experience.
• 10+ years experience of PCB high speed layout design using industry standard PCB design.
• Experience with using Allegro Cadence software.
• Experience with high current density designs.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 10 to 15 years of related experienc;Experience in similar job roles.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

5 years required

Skills:

Project Management, Product Design, Compliance, English

Job type:

Full-time

• Design and develop the functional testers, including hardware & software elements, following the customer test specification/test requirement.
• Review equipment data sheets and select appropriate equipment based on requirements.
• Support creation of structural or functional test strategy and test plan to meet project goals and requirements.
• Support creation of technical proposals with costed BOM and hours estimates.
• Debug tester issues using the design of experiments, tools, and failure analysis methodologies.
• Ensure to deliver the goods and follow the project plan. Project management and cost planning.
• Provide high-level test hardware and software solution architecture.
• Provide technical support to the production team. For engineering change, fixing the fault failure issue.
• Review the tester concept design with the mechanical engineer and provide good feedback to meet the project goals and requirements.
• Collaborate with product design teams with feedback from product testability, test coverage, diagnosability, reparability, firmware/diagnostics, and user experience.
• Create reports and documentation.
• Perform tester commissioning on local / overseas.
• Drive problem-solving and corrective action related to the causes of the project issue.
• Able to support production work abroad at different times. In a necessary situation Whether it's remote control or answering emails.
• Responsible for overseeing project execution and ensuring timely completion by analyzing project scope and defining specifications.
• Develop test methods for product investigations, assess the adequacy and sequence of test programs, and examine samples to ensure compliance with requirements.
• Identify key factors [Risk/Mitigation plan ] for tester improvement and customer satisfaction enhancement.
• Prepare comprehensive reports documenting project proposals and outcomes estimation.
• Knowledge/Skills/Competencies.
• Bachelor s degree in Electronics, Industrial, Mechatronic engineering, or in a related field.
• Proficiency in developing programming languages such as Labview, Teststand, PLC, Python, Robot Framework, C and C++.
• Ability to read hardware schematic. Compare and understand equipment specifications. [Proficiency with Altium software/Easyeda is preferred.].
• Strong skill in wiring and equipment assembly.
• Have background experience in 3D/CAD review (SolidWork).
• Ability to work under pressure and with limited time, positive attitude, teamwork, and good interpersonal skills.
• Able to travel locally / overseas for test product implementation, and commissioning.
• Professional written and verbal communication skills in English.
• Males must be exempt from military service.
• Minimum of 5 years of working experience in test development or related industry.
• Strong analytical skills in innovative approaches to electrical circuit systems/PCB design development.
• Typical Experience.
• Minimum of 5 years of working experience in test development or related industry.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

5 years required

Job type:

Full-time

• Date: 3 Apr 2025 Location: Chonburi, Sriracha (ชลบุรี), Thailand, 20230
• ROLE & RESPONSIBILITY.
• Ensure and Maintain the availability and integrity of the system both hardware and software as a whole software based plant automation system which has multiple users and various parties involved in the maintenance and supporting.
• EDUCATION.
• Bachelor in Engineer - Instrumentation,Control Engineering, Mechatronic, Electronic, Automation.
• EXPERIENCE.
• At least 0-5 years in instrument field.
• OTHER REQUIREMENTS.

Experience:

5 years required

Skills:

Electronics, Assembly

Job type:

Full-time

• Be responsible for DB, WB, Alignment, test equipment setup, buyoff, repairing and maintenance.
• Reporting to Equipment & Maintenance engineer to drive equipment technical problem resolution.
• Perform equipment PM, Equipment Calibration.
• Installation, modification, upgrade manufacturing equipment.
• Improve equipment performance and reliability.
• Reduce equipment downtime.
• Onsite trouble shooting and repairing when equipment down.
• Required Qualification Associate Degree of Engineering or above in optical Fiber communication, electrical, electronics, computer or related field.
• Minimum 5 years of experience as equipment/process technician in semiconductor assembly or optical products.
• Experience must related with die attach, wire bonding, mechanical alignment and test. MRSI, Datacon, ASM Amicra, 4T die bonder, KNS, ASM wire bonder is preferred.
• Can accept day and night shift rotating working in cleaning room.
• Working with team and under pressure of some situation.
• Machine Preventive Maintenance Utilize preventive maintenance and resolve technical issue of operation machines to reduce downtime and/or break down of production processes.
• Experienced for alignment process and optical test process.
• Equipment of alignment and test module.
• We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

Experience:

6 years required

Skills:

Electronics, Excel, Data Entry

Job type:

Full-time

• Good knowledge of an electronics manufacturing environment, material and processes.
• Good understanding of specific customers' business, organization, products and processes.
• Knowledge of basic computer applications such as WORD, Excel, PowerPoint and multiple business applications.
• Good presentation skills.
• Good analytical and statistical skills.
• Good leadership and coaching skills.
• Ability to handle multiple tasks while maintaining attention to detail and accuracy and working under tight time deadlines.
• Ability to evaluate, prioritize and problem solve a variety of tasks to ensure their timely and accurate completion.
• Ability to communicate effectively, both verbally and in writing, with a wide variety of internal and external customers.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional overnight travel may be required.
• Typical Experience.
• Four to six years of relevant experience.
• Typical Education.
• Bachelor's degree in related field, or consideration of an equivalent combination of education and experience. Educational requirements may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

2 years required

Skills:

Assembly, Electronics

Job type:

Full-time

• Reads and analyzes schematic diagrams, circuit descriptions and similar technical information.
• Troubleshoots and repairs failed products. Inspects for physical and visual quality requirements.
• Isolates and replaces faulty components.
• Sets up, operates, and adjusts test sets and auxiliary equipment.
• Proves tests and test sets.
• Troubleshoots and repairs test equipment/fixture problems.
• Performs reactive maintenance on electromechanical surface mount assembly equipment.
• Provides basic product technical data setup support for printed circuit boards, subassemblies, or other related company products.
• Reads and analyzes schematic diagrams, Bills of Materials, Component Data, Engineering Change Order and similar technical information.
• Inspects for standard quality requirements.
• Maintains records for technical product data availability, data integrity, and data completeness.
• Schedules and performs preventative maintenance.
• Maintains records for equipment availability, failure analysis and maintenance.
• Maintains equipment spare parts database.
• Tracks spare parts usage and maintains inventory of equipment spare parts.
• Helps move, install, set up and refurbish equipment.
• Knowledge/Skills/Competencies.
• Engineering Foundation Competencies.
• Knowledge of mechanical design methods, procedures and processes.
• Knowledge of and ability to use MCAD systems.
• Knowledge of SMT placement equipment, specifications and operation.
• Basic knowledge of computer programming.
• Knowledge of tooling design and vendor fabrication of mechanical assemblies.
• Strong math skills.
• Ability to manipulate textual data, edit files and use E-Mail with HP-UX tools.
• Ability to compile data, compute quantities, determine materials needed, and prepare cost estimates.
• Knowledge of quality standards.
• Ability to effectively communicate with a variety of internal customers.
• Knowledge of electrical, electromechanical and pneumatic systems and principals of operation.
• Knowledge of production operations and operator responsibilities.
• Ability to analyze equipment and systems, troubleshoot problems and make appropriate repairs.
• Knowledge of digital electronics and repair methodologies.
• Knowledge of personal computers and Windows applications.
• Knowledge of quality standards.
• Ability to effectively communicate with a variety of internal customers.
• Physical Demands.
• Duties of the position are performed in a manufacturing environment with frequent exposure to noise, dust, chemicals, operating machinery, temperature extremes, hazardous substances, etc.
• Duties require extended periods of sustained visual concentration on detailed documentation and product assemblies.
• Duties of the position require periodic light physical effort and exertion including prolonged repetitive motions, sitting in confined workspaces, using tools and equipment, and moving and handling materials.
• Duties may require periodic heavy manual effort including lifting objects over 20 pounds.
• Typical Experience.
• Zero to two years of relevant experience.
• Typical Education.
• Two or three year community college diploma in a related field, or an equivalent combination of education and experience.
• Educational requirements may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Skills:

Risk Management, Research, Electronics, English

Job type:

Full-time

• Sales Opportunity Pursue: Collaborate closely with the sales team to identify and secure sales opportunities, ensuring we meet our annual sales and order targets.
• Sales Support & Training: Provide ongoing support to the sales team, including training on Digital Energy solutions for Data Centers, to enhance their capabilities and customer interactions.
• Technical Proposal Preparation: Prepare detailed technical proposals and support the tendering process to ensure competitive and compelling submissions.
• Technical Governance & Risk Management: Offer technical governance and risk management during the sales (S2 review) and project execution stages, ensuring solutions meet quality and safety standards.
• Complex Solution Development: Support third-party system integration and assist in the development, testing, and implementation of complex solutions.
• Engineering Standardisation: Provide expertise in system design, engineering, and implementation for complex upgrade projects, utilizing engineering software tools and application standards.
• Collaboration with Offer Management & R&D: Work with Offer Management and R&D teams to identify offer gaps, product requirements, and contribute to the roadmap.
• System Architect Community Animation: Foster a cohesive and collaborative System Architect community, encouraging the sharing of domain knowledge and leveraging experiences for customer success.
• Pre-sales Activity Support: Engage in pre-sales activities, including prospecting, lead qualification, research, demonstrations, proposal preparation, and high-level system architecture for strategic and targeted accounts.
• Engineering Leadership & Development: Lead by example in developing personal skills and competencies to become a Trusted Advisor. Provide coaching and mentoring to team members to enhance their professional growth.
• Electrical & Electronics Engineering, Mechanical Engineering, Instrumentation & Control Engineering or related Degree\.
• Working Experience.
• 8 - 10 years of working experience.
• System integration, building and power systems design, facility management, energy management.
• Others.
• English spoken.
• Innovative and has strong passion for Building and Power Management solutions.
• Pro-active and self-motivated team player.
• Go-getter, over achievers and great aptitude for sales winning.
• Good Communication and interpersonal skills.
• Good presenter and able to communicate fluently with customers.
• Able to work independently.
• IT system and network system know-how.
• Exposure to projects sales and/or execution in country.
• Good sense of customer service.
• Leadership skills.
• Analytical skills.
• End User and Solution Approach.
• Primary Location: TH-10-Bangkok.
• Schedule: Full-time Unposting Date: Ongoing

Experience:

8 years required

Skills:

Product Design, Procurement, Electronics

Job type:

Full-time

• Support development of production test strategies based on product design specification.
• Develop test plans and requirements for customer products including both hardware and software elements.
• Lead the procurement, qualification, and installation support for manufacturing for a large customer.
• Be accountable for the test process optimization with a focus on productivity improvements to cycle time and yield within a CFT or across a large equipment set serving multiple customers.
• Provide project leadership, including management of (and communication with) team members, suppliers for comprehensive test deployments including structural, functional, system, stress and final test applications for a large customer.
• Support sales process by providing support to the quoting process.
• Work with Design to enhance solutions with feedback from product testability, test coverage, diagnosability, reparability, firmware/diagnostics and user experience.
• Keep up to date with relevant industry knowledge and regulations.
• Lead and drive complex problems related to product yield or test performance.
• Support sales process by providing support to the quoting process.
• Set yearly plans and goals for the department, give direction on expected performance, provide regular performance evaluations and ongoing feedback. Accountable for all department objectives and achieving agreed targets for key performance indicators.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Typical Experience.
• Over 8 years of working experience in Test Manufacturing in Electronics industry.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

4 years required

Skills:

YouTube, Business Development, Electronics, English

Job type:

Full-time

• Bachelor's degree or equivalent practical experience.
• 4 years of experience in business development, partnerships, management consulting, or investment banking, in the Consumer Electronics, Auto, OEMs, Telecom, E-Commerce/Retail, Apps, Ads, Gaming, or Technology industries.
• Experience working with C-level executives and cross-functionally across all levels of management.
• Experience with data or business analytics.
• Ability to communicate in English and Thai fluently to support client relationship management in the region.
• Preferred qualifications:Experience working in consulting or strategy and operations/go-to-market roles within the e-commerce industry.
• Ability to identify potential business opportunities, assess financial/business benefit, structure agreements, and discuss terms with strategic partners.
• Ability to be a fast learner, highly motivated, and versatile player.
• Excellent analytics, logical, and problem- solving skills with attention to detail.
• Track record of project management and cross-functional collaborations.
• In this role, you will lead and establish a video commerce venture on YouTube. You will build profitable and long lasting business opportunities for YouTube creators while revolutionizing the e-commerce landscape in Thailand. You will drive and own a comprehensive strategy to establish YouTube as a preferred shopping destination, while conducting in-depth shopping data analysis to gain valuable insights. You will also help educate creators, brands, and other internal teams on best practices to enhance shopping initiatives.At YouTube, we believe that everyone deserves to have a voice, and that the world is a better place when we listen, share, and build community through our stories. We work together to give everyone the power to share their story, explore what they love, and connect with one another in the process. Working at the intersection of cutting-edge technology and boundless creativity, we move at the speed of culture with a shared goal to show people the world. We explore new ideas, solve real problems, and have fun and we do it all together.
• ResponsibilitiesDrive adoption of YouTube Shopping in Thailand with a focus on critical business metrics (e.g., Gross Merchandise Value (GMV) and Earning channels).
• Analyze campaign performance, sales data, video commerce market reports, and Key Performance Indicators (KPIs) to inform market shopping strategies.
• Collaborate across various cross-functional teams to bring the best of YouTube to partners and keep our cross-functional teams updated on partner and market developments to aid decision making.
• Support development of go-to-market strategy and long-term strategies across product categories aligned with overarching business goals.
• Develop knowledge of the market segment and global trends/events, and continually monitor performer, participant efforts, develop and build relationships with commerce focused Multi-Channel Networks (MCNs)/agencies to help them succeed on YouTube, and develop new business opportunities.
• Google is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. We also consider qualified applicants regardless of criminal histories, consistent with legal requirements. See alsoGoogle's EEO Policy andEEO is the Law. If you have a disability or special need that requires accommodation, please let us know by completing ourAccommodations for Applicants form.

Skills:

Electronics, English

Job type:

Full-time

• a mission we all believe in and aim towards achieving every day.
• To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always. At TikTok, we create together and grow together. That's how we drive impact.
• for ourselves, our company, and the communities we serve.
• Join us. The e-commerce industry has seen tremendous growth in recent years and has become a hotly contested space amongst leading Internet companies, and its future growth cannot be underestimated. With millions of loyal users globally, we believe TikTok is an ideal platform to deliver a brand new and better e-commerce experience to our users.
• We are looking for passionate and talented people to join our product and operations team, together we can build an e-commerce ecosystem that is innovative, secure and intuitive for our users. In this role you will be responsible for developing the education program that inspires, motivates and connects TikTok Shop creator community. Join us as we drive the future of e-commerce here at TikTok.
• Identify path to successes for brands across all categories, including FMCG, Electronics, Lifestyle, and Fashion.
• Work with Category Strategists, Account Managers, and Brands directly to ensure brands' growth once they start selling with TikTok Shop.
• Manage Merchant Policy budget to be most effectively and efficiently use to grow platform's and brands' key metrics.
• Work with TSP (TikTok Shop Partner) to get brands through cold start.
• Work with TSP (TikTok Shop Partner) to identify best practices in generating GMV at scale.
• Minimum Bachelor's Degree or above.
• Stakeholder management skill.
• Logical, Data, and Analytical skill.
• Fluent in English and Thai.
• Preferred: Experienced in E-commerce role or Strategy role.
• Experience in small team or medium management (2-5 people) with high caliber team members.
• TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Experience:

3 years required

Skills:

Compliance, Quality Assurance, Assurance

Job type:

Full-time

• Develop, configure and optimize processes.
• Assess processes, take measurements and interpret data.
• Design, run, test and upgrade systems and processes.
• Develop best practices, routines and innovative solutions to improve production rates and quality of output.
• Perform process simulations.
• Manage cost and time constraints.
• Perform risk assessments.
• Provide process documentation and operating instructions.
• Solve complex problems.
• Interface effectively with customers and other functional teams within Lumentum such as R&D, Product Engineering and Product Line Management to validate requirements and ensure process or technology milestones are clearly defined and achieved.
• Ensure compliance to quality assurance processes and industry best practice.
• Coach, mentor and motivate team members.
• RequirementsBachelors in engineering, or appropriate sciences.
• 3 years of experience in a fast paced electronics manufacturing environment, preferably in semiconductor or opto-electronics.
• Familiarity with the design of experiments (DOE) and statistical process control (SPC).
• Creative thinker, with strong analytical and problem solving, and project management skills.
• Ability to work in a cross-functional team and interact with all levels of management.
• Strong leadership and inter-personal, written and oral skills.
• Willing to participate in calls in multiple time zones, and occasional overseas.
• We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

Experience:

5 years required

Skills:

Problem Solving, Negotiation, English

Job type:

Full-time

• Pursue market leadership via understanding the value chain of online and traditional businesses and secure market leadership by managing market distribution trends.
• Manage product portfolios (range, exclusivity), sell-in and sell-out platforms (Trade in / Up, EIP, EPP), logistic methodologies, and inventory management and control weekly, monthly, and annual sales revenue by account to drive sales of the assigned function.
• Initiate sales and trade plan to meet sale target by developing Strategy for Short-t ...
• Plan demand forecast to make sure that stock is available for sale.
• Increase the number of customers by optimizing performance through e-shop development and management.
• Understand the market and consumer and be able to analyze and propose promotions that match each target group.
• Administrative of the price approval process. Serve as a liaison and primary point of contact within the e-Commerce organization for cross-functional partners acting as a project manager to evaluate, prioritize, develop, manage, implement, and e-Commerce initiatives.
• Build and direct a cohesive team of internal and external personnel to effectively develop e-Commerce solutions.
• Explore new channel expansion to build new revenue.
• Qualifications A degree in business or a related degree is essential.
• At least 5-7 years working experience in online FMCG, Pure Player, and e-Commerce capacity.
• Specific knowledge of the online store and / or e-Commerce.
• Knowledge of the internet, e-commerce, direct sales and marketing, and familiarity with best practices and web-based marketing is essential.
• A systematic and logical approach to problem solving and a capacity to work around problems.
• Ability to adapt and respond quickly to a fast changing environment.
• Well-organized project management approach.
• Strong communication, negotiation, and presentation skills in Thai and English.
• Ability to influence, manage stakeholders and take on needs across the business.
• Skills and Qualifications

Experience:

3 years required

Skills:

Risk Management, Compliance, Accounting, English

Job type:

Full-time

• Analyze and evaluate business processes to manage risk and identify best practices for process improvement and efficiency enhancement.
• Design and implement an internal audit program, and conduct internal audits.
• Collaborate with relevant stakeholders to recommend appropriate changes in processes or approaches.
• Conduct and review self-audits as designed by Regional Headquarters (RHQ) or Headquarters (HQ).
• Develop training materials and provide training to relevant teams.
• Monitor key performance indicator (KPI) data related to operational risks.
• Review compliance policies and encourage employees to adhere to them.
• Perform other duties as assigned by supervisors or RHQ/HQ.
• QualificationsBachelor s degree in Accounting.
• A minimum of 3 years of experience in internal or external auditing.
• Experience in an audit firm is an advantage.
• Strong understanding of business processes, workflows, and operations; must possess logical thinking skills and attention to detail.
• Skilled in multitasking, prioritization, problem-solving, and adapting to dynamic business changes.
• Excellent command of English (written, spoken, and reading).
• Proficient in Microsoft Word, Excel, PowerPoint, and Outlook (experience with SAP is preferable).
• Skills and Qualifications