Filter Jobs

Skills:

Assurance, Cost Estimation, Procurement, English

Job type:

Full-time

• Provide technical solution, technical assurance, and consultation to Asset, on the new or modification project, with regards to Electrical Engineering discipline, including engineering study and evaluation (feasibility study, conceptual design, basic and detailed engineering) engineering cost estimation, problem analysis, field troubleshooting, as well as implementation of new technologies.
• Be representative in technical meeting for facility engineering part to provide advice/ recommendation in own expertise, including to any technical review sessions, HAZ ...
• Provide advice/ recommendation and perform necessary procurement process.
• Provide inputs to support the study of new technology and renewable energy.
• Provide inputs to support the development/review of related engineering standards, procedures, guidelines, etc.
• Ensure work quality to be aligned with Engineering standard, policy, procedures, and guidelines.
• Promote and ensure an effective implementation of SSHE rules and procedures as well as engineering best practices.
• Professional Knowledge & Experiences.
• Bachelor s Degree or higher in Electrical Engineering or related fields.
• Minimum 10 years experience in the engineering and design of the electrical systems preferably in the oil and gas or a similar industry.
• Experiences in working on construction and modification projects.
• Has strongly knowledge in the engineering/design, especially the electrical equipment, generators, transformers, switchgear, motor control centers, uninterruptible power supply, DC chargers, batteries, variable frequency drives, motors, solar and wind power generation, explosion proof equipment, cables, and electrical control system, interface requirements, specifications, codes & standards.
• Be able to design, select, and develop electrical document such as SLD, power generation and distribution sizing, cable sizing, load list, lighting and earthing layout, power layout, interconnection diagram, heat tracing diagram.
• Be able to select explosive protected equipment as per hazardous area classification.
• Be able to perform technical clarification, and technical bid evaluation.
• Be able to prepare material take off within project timeline.
• Be able to participate and supervise FAT, SAT, pre-commissioning, and the commissioning work of electrical equipment or package to comply with the applicable specifications, procedures, codes, and standards.
• Be able to prepare scope of work for construction.
• Ability to use engineering detailed design and analysis software such as ETAP.
• Good communication, interpersonal and presentation skills.
• Good command of both written and spoken English.

Experience:

5 years required

Skills:

AutoCAD, Visio, English

Job type:

Full-time

• Responsible for planning preventive maintenance schedules for the electrical system.
• Responsible for coordinating and managing vendors and suppliers to preventive maintenance and payment plans.
• 2nd Level support to Data Center Operation (FOC), on site to solve Incident and Problem management.
• 2nd Level support to engineer team all site, Data Center (TT1, TT2, MTG, BNA).
• To create & update reports and documents to comply with ISO 20k, 22k, 27k, 50k & TCOS standards.
• Review PUE, cost saving energy and report.
• Measured Efficiency air system and record annual report.
• Responsible for implementing Electrical such as MU, TR, MDB, GEN, UPS, RECT, BATT, ATS.
• Bachelor degree of Engineering, Electrical engineering or related field.
• More than 5 years of experience in maintenance of electrical systems such as RMU, TR, MDB, GEN, UPS, RECT, BATT, ATS: implement and support electrical systems in buildings or Data Centers.
• At least 1 years experience in designing electrical systems (such as RMU, TR, MDB, GEN, UPS, RECT, BATT, ATS). implement, and support for electrical systems in building.
• Able to use the program AutoCAD, Visio.
• Able to work as a team and work in and standby on call on holiday.
• Able to work overtime if required and a hotline arrives (Less than 1 hour on site from your home).
• Proficiency in English communication is beneficial for both reading and writing.
• Work Location: TrueIDC - Bangna Site (KM26).

Skills:

Research, Product Design, English

Job type:

Full-time

• Develop and implement technical solutions in two or more technical areas. Lead smaller projects and may coordinate other engineers including reviews of their work.
• Reviews and interprets customer documentation, conducts appropriate research, analysis and experiments with minimal direction from senior staff.
• Creates technical proposals (solution and timelines) based on requirements.
• Provide high level test hardware and software solution architecture.
• Create structural or functional test strategy and test plan to meet project goals and requirements.
• Create technical proposals with costed BOM and hours estimates.
• Create product test requirements with guidance from senior staff and collaboration with customer designers.
• Provides Technical program management for small projects.
• Develop production test strategies based on product design specification.
• Design and develop test solutions including hardware & software elements and then system integration, qualification, and installation to meet product, quality and test requirements outlined in the test plan.
• Debug of tester issues using design of experiments, tools, and failure analysis methodologies.
• Execute all validation/qualification requirements by applying statistical and common industry methods.
• Stabilization of Test Solutions for manufacturing working to optimize with process teams focusing on cycle time and yield.
• Test developers may also work with product design teams with feedback from product testability, test coverage, diagnosability, reparability, firmware/diagnostics and user experience.
• Keeping up to date with relevant industry knowledge and regulations.
• Knowledge/Skills/Competencies.
• DIGITAL/LOGIC: Familiarity of EE-Embedded such as FPGA, DSP and Microcontroller 8-bit, 32-bit ARM Cortex, Familiarity of communications protocols such as RS-232, UART, SPI, I2C, USB and PCIE Gen 3 and higher,.
• Knowledge of Timming diagram of Digital signal analysis.
• POWER: EE-POWER Switching power supplies, Familiarity of Power efficiency in AC-DC converter, EE-POINT of Load Supplies, Power Integrity-CoreSim.
• PCB/LAYOUT: Signal Integrity, Power Integrity, Tolerance Analysis, Cadence, Mentor Xpedition, Mentor PADS, Altium Designer, Other Layout tools (Preferably Altium Designer), Print Circuit Board Fabrication.
• SCHEMATIC DESIGN/SIGNAL INTEGRITY: EE-Digital, EE-Analog, Tolerance Analysis, Static Timing, Schematic Modeling.
• ANALOG: EE-Analog, Tolerance Analysis, Mixed signals of digital and Analog, Grounding balance of multiple systems.
• RF: RF Design(20Ghz).
• Typical Experience.
• Minimum of 5+ yrs of experience Structural and Functional Test development / support for electronic / automotive industry.
• Strong knowledge on test development (SW and Test fixtures).
• Proven strong knowledge on test programming development.
• Familiarity with Altium Designer and PCB fabrication.
• Knowledge on fixtures design, setup/integration.
• Good verbal, and written communication skills in English.
• Must have experience with disciplined operations.
• Must have experience working with and coordinating well with multiple intercompany organizations.
• Typical Education.
• Degree or higher in Electronics Engineering or equivalent.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Skills:

English

Job type:

Full-time

• Good command of English and computer literacy.
• Be able to work at Sriracha, Chonburi.

Experience:

4 years required

Skills:

Electronics, English

Job type:

Full-time

• Under supervision and with minimal assistance define, specify, qualify, install, support and optimize test process and test equipment solutions for manufacturing.
• Lead test process optimization, with a focus on productivity improvements to cycle time and yield for a specific set of equipment within an Operations value stream.
• Debug of test process and equipment solutions using design of experiments, tools, and failure analysis methodologies.
• Collaborate with Quality, Process and Equipment engineers to detect and solve product and test yield and performance issues.
• Develop improvement roadmaps for test coverage, diagnosability, reparability, test time reductions and OEE.
• Analyze and interpret data and information from yield reports and equipment logs and product diagnostics to determine sources of yield loss.
• Provide solution support to process engineers to improve detection of known defect types as part of a Process Control plan.
• Support development of test equipment integration into Manufacturing Execution Systems including yield, tester log and product parametric information.
• Knowledge/Skills/Competencies.
• Good logical thinking and analytical skills.
• Good command of English and Thai speaking.
• Ability to work in Laem Chabang, Chonburi.
• Typical Experience.
• Min. 4 years of working experience in testing and debug in both electrical and optical level.
• Typical Education.
• Degree or higher in Telecommunication Engineering or Electronics Engineering.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

3 years required

Skills:

Electronics, English

Job type:

Full-time

• Under supervision and with assistance develop, qualify, and install test applications into manufacturing operations.
• Optimize the Test process focusing on productivity improvements to cycle time and yield.
• Debug of solutions provided by external vendors or customers based on training supplied.
• Assist with test optimization based on feedback from customers and operations partners based on a solid unstinting of the test coverage, diagnosability, reparability, firmware/diagnostics and user experience.
• Maintain with minimal supervision, the continuing performance of the Testers and participate in the OEE improvement plans, yield and test time optimization.
• Knowledge/Skills/Competencies.
• Good logical thinking and analytical skills.
• Good command of English and Thai speaking.
• Ability to work in Laem Chabang, Chonburi.
• Typical Experience.
• 0-3 years of working experience in testing and debug in both electrical and optical level.
• Welcome new graduated.
• Typical Education.
• Degree or higher in Telecommunication Engineering or Electronics Engineering.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

1 year required

Skills:

Research, Project Management, Problem Solving

Job type:

Full-time

• Research & Develop Electronics-related matters such as audio, meter, body control module, air back control unit to meet the specifications & project's timeline and improve quality cars matching regional market requirements.
• Develop Electronics component parts of a vehicle project from physical stage through production according to Nissan development methodologies and processes for vehicle development.
• Develop component parts to meet all engineering requirements, create and Green Belt ...
• Benchmark of competitor vehicles related electronic parts related matters.
• Validate and confirm supplier's drawing.
• Cross functional collaboration with Nissan Japan, suppliers and related parties to meet project target.
• Quality improvement Analyze market issue to investigate root cause of issue.
• Establish the countermeasure to resolve the issues in actual production.
• Participate in quality evaluation and manufacturing activities.
• Cost improvementCreate value analysis & value engineering (VA&VE) activities to optimize processes and cost to achieve target as a plan.
• Manage localization parts to achieve quality, cost and delivery target.
• Benchmark of competitor & Nissan global model to achieve cost competitive.
• Qualifications Bachelor's degree in Electrical, Electronics, or Mechatronics Engineering.
• 1-3 years of experience in engineering field in automotive industry.
• Experience working in a multicultural environment is an advantage.
• Project Management, Problem Solving, Presentation.
• Car Driving.
• Good English communication, TOEIC score: above 600.
• If you are interested in this job role, please prepare your updated resume or LinkedIn profile for the application process through the Nissan Job Portal.
• Only shortlisted candidate will be contacted for an interview".
• For more information about Nissan's products, services, and commitment to sustainable mobility, visit nissan-global.com. You can also follow us on Facebook, Instagram, Twitter and LinkedIn and see all our latest videos on YouTube.
• Why Nissan?.
• You will definitely get the right answers why you should join us through watching the video on YouTube.
• Samut Prakan Thailand

Experience:

5 years required

Skills:

Compliance, Legal, ERP, English

Job type:

Full-time

• Ensure compliance with legal and company safety and environmental regulations to provide a safe, eco-friendly working environment.
• Integrate sustainability practices into health, safety, and environmental policies and procedures.
• Lead by example to achieve accident-free workplace.
• Develop and execute health and safety plans, incorporating preventative measures and addressing risks proactively.
• Lead initiatives to reduce the plant s carbon footprint and energy consumption, aligning operations with corporate sustainability goals.
• Develop and implement programs to minimize waste, increase recycling, and optimize resource usage.
• Cultivate a culture of safety and environmental responsibility through employee training, awareness programs, policy enforcement and community engagement initiatives.
• Monitor and address safety risks or incidents, taking corrective and preventive actions promptly.
• Regularly monitor and report on environmental impact metrics, driving continuous improvement in sustainability performance.
• Collaborate with internal and external stakeholders to explore innovative solutions for sustainable manufacturing processes.
• Plant Operations and Production Management Plan, organize, and oversee daily plant operations to meet production goals and customer expectations.
• Optimize production capacity, flexibility, and asset utilization while minimizing unnecessary costs.
• Ensure equipment availability, reliability, and sustainability to maintain seamless operations.
• Oversee production output, product quality, and on-time delivery, ensuring alignment with company standards.
• Lead and coordinate maintenance activities to minimize equipment downtime, maximize capacity utilization, and optimize production output. Focus on reducing Mean Time Between Failures (MTBF) by effectively utilizing our Maintenance Management software.
• Collaborate with other department managers to achieve manufacturing objectives effectively.
• Monitor operational performance, analyze data, and implement corrective actions as needed.
• Develop and manage operational budgets (OPEX), ensuring cost control and financial accountability.
• Maintain and update operational ERP modules (e.g., BOM, routes, costs) for process efficiency.
• Process Improvement and Innovation Analyze production processes to improve safety, quality, productivity, and reliability while reducing waste and costs.
• Implement Lean Manufacturing, Just-In-Time (JIT), and other efficiency-enhancing methodologies.
• Propose and execute continuous improvement initiatives, modernization projects, and CAPEX investments.
• Oversee the implementation, testing, and performance measurement of new equipment and tools.
• Drive the industrialization of new products and modifications to existing processes.
• Quality Control Collaborate with Quality Managers to understand customer requirements and ensure high-quality production standards.
• Implement and enforce Quality Management Systems (QMS) aligned with Group standards.
• Promote a zero-defect mindset through effective quality control practices and continuous training.
• Resolve quality issues impacting production or customer satisfaction swiftly and effectively.
• Management and Leadership Lead internal communication by sharing company strategy, goals, and plant performance updates with employees.
• Enforce the company s Performance Management System, including setting KPIs, regular feedback, and career development plans.
• Work with HR to create learning and development pathways for team members.
• Develop workforce technical skills in key areas: robotics, industrial IT, preventive maintenance, advanced electrical and mechanical maintenance.
• Propose and implement organizational changes, staffing plans, and payroll budgets aligned with strategic goals.
• Build a culture of collaboration, continuous improvement, and accountability within the team.
• Nuclear Safety Ensure that nuclear safety is taken into account in decision making and actions, and that it always takes precedence over any other consideration.
• Use a balanced, rigorous, and prudent approach to decision making with respect to quality, cost, and schedule such that nuclear safety is never compromised.
• Ensure that involved personnel understand not only their own responsibilities and the consequences of mistakes, but also those of their immediate colleagues and how these responsibilities complement each other.
• Ensure that key operational and technical positions are filled by competent and knowledgeable persons that are empowered to speak openly.
• Adopt and encourage a questioning attitude, particularly when choices, or lack thereof, are presented.
• Challenge unsafe decisions, acts, behaviors, and conditions.
• Take prompt conservative and preventive actions when an incident that could affect nuclear safety is reported, even if not yet fully understood or documented.
• Communicate transparently to the Board of Directors any issue which might compromise nuclear safety, including any human, technical or organizational issue.
• IT and Systems Integration Standardize and harmonize operational modules (e.g., BOM, routes) across industrial sites.
• Develop and deploy standardized reports to monitor performance and enhance data-driven decision-making.
• Leverage ERP and IT systems to support operational efficiency and reporting.
• Automation and Smart Manufacturing Develop and implement automation strategies to improve operational efficiency, productivity, and safety.
• Identify and prioritize opportunities for robotics, artificial intelligence (AI), and advanced manufacturing technologies to enhance plant performance.
• Lead the integration of smart manufacturing systems, ensuring seamless operation with existing equipment and IT infrastructure.
• Collaborate with cross-functional teams to automate repetitive tasks, reduce human error, and streamline workflows.
• Monitor and evaluate the performance of automated systems, driving continuous improvement through data analytics and predictive maintenance.
• Build technical expertise within the team to support the implementation and maintenance of automation technologies.
• Stay informed of emerging trends in Industry 4.0 and smart manufacturing, proposing initiatives to maintain a competitive edge.
• Ensure automation solutions align with sustainability goals by optimizing energy use and reducing waste.
• Qualifications Master s degree in Mechanical, Industrial, Manufacturing, Production Engineering, or related field.
• Additional certifications in Lean Six Sigma, Supply Chain Management, or Production and Inventory Management (e.g., CPIM) are a plus.
• A minimum of 10 years of experience in plant management or similar roles, including at least 5 years of proven success in team leadership in a manufacturing environment.
• Extensive knowledge of production processes, quality control systems, safety protocols, and supply chain management.
• Demonstrated success in implementing productivity enhancements, cost-saving measures, and safety improvements.
• Hands-on experience with Lean Manufacturing and Just-In-Time principles.
• Familiarity with technical drawings and the ability to translate them into actionable production plans.
• Experience in budget management, CAPEX planning, and resource allocation.
• Excellent command of English, both written and spoken, with the ability to communicate effectively at all organizational levels.
• Proficient in ERP systems for manufacturing operations and inventory management.
• Advanced skills in Microsoft Office Suite.
• Familiarity with production planning software and other digital tools used for process optimization is a plus.
• Key competencies: Exceptional leadership, communication, and organizational skills, with the ability to inspire and guide teams toward strategic goals.
• Strong analytical skills with a track record of data-driven decision-making and continuous improvement initiatives.
• Ability to manage multiple priorities effectively, adapt to dynamic environments, and meet tight deadlines.
• Strategic thinking and problem-solving skills to align plant operations with company objectives.

Experience:

5 years required

Skills:

Contracts, Compliance, Project Management, English

Job type:

Full-time

• Oversee and coordinate the maintenance and operation of critical infrastructure systems, including but not limited to HV and LV distribution systems, associated plant/equipment, HVAC mechanical cooling/heating systems, fire protection and suppression systems, and electrical and mechanical systems within the portfolio of buildings.
• Manage maintenance contracts and monitor contractor performance to ensure compliance with service level agreements.
• Provide technical support to the maintenance and operations teams, ensuring that all ...
• Monitor and optimize the performance of critical infrastructure systems, ensuring that they operate at peak efficiency and reliability.
• Develop and implement maintenance programs and procedures to ensure that critical infrastructure systems are maintained in accordance with best practice standards.
• Prepare and maintain accurate records of all maintenance and engineering work, including maintenance schedules, work orders, and engineering drawings.
• Develop and maintain relationships with key stakeholders, including Facilities Managers, the Client's staff and representatives, contractors, and suppliers.
• Participate in emergency call-out roster providing cover for weekend and team member absences, as required.
• Volunteer ideas/initiatives that contribute to the service levels and delivery.
• Undertake other tasks, as required by the Client, in accordance with experience and competencies.
• Bachelor's degree in Mechanical/Electrical Engineering or related field.
• Minimum of 5 years of experience in critical environment or data centre operations and maintenance.
• Experience in managing maintenance contracts and monitoring contractor performance.
• Strong technical knowledge of critical infrastructure systems, including but not limited to HV and LV distribution systems, associated plant/equipment, HVAC mechanical cooling/heating systems, fire protection and suppression systems, and electrical and mechanical systems.
• Excellent problem-solving skills, with the ability to identify, diagnose and solve technical issues.
• Excellent English & Thai communication skills, with the ability to communicate technical information to non-technical stakeholders.
• Strong project management skills, with the ability to manage multiple projects simultaneously.
• Knowledge of safety and environmental regulations and standards.
• Ability to work under pressure and in a fast-paced environment.

Experience:

No experience required

Skills:

Windows Server, Microsoft Office, English

Job type:

Full-time

• Install & Pre-install legacy and enterprise computer systems and their peripherals.
• Take calls from customers, deliver on-site support services and initiate the right response.
• Maintain & Service on legacy and enterprise computer systems and their peripherals.
• Perform PM as schedule.
• Stand-by service as request.
• Ability to work with multiple jobs.
• Able to work under time pressure./ able to work under pressure.
• Driving your own car.
• Bachelor's degree in Computer Engineering, Electronics, Electrical Engineer or related field.
• Male only.
• 0 - 3 years experience in computer field or related work.
• Computer skills: Window, Server, Storage, Basic Network, Microsoft Office and etc.
• Willing to participate in non-standard working time models (Willing to work on a flexible time including after office hours, holidays and weekend.

Skills:

Python, Git, Electrical Engineering, English

Job type:

Full-time

• Design and develop digital logic and firmware for FPGA-based systems.
• Lead the bring-up and verification of functionality in new FPGA-based systems.
• Collaborate closely with hardware and software teams throughout the design and integration phases.
• Provide support to Integration Testing and Product Verification teams.
• Ensure that all designed modules meet required specifications and integrate seamlessly with the overall system architecture.
• This role offers the chance to work alongside world-class experts in multiple disciplines, contributing to high-impact design applications.
• Knowledge/Skills/Competencies.
• Proficiency in Verilog or VHDL programming.
• Proficiency in Python or C programming is a plus.
• Practical experience with hardware (e.g., soldering, oscilloscopes, power supplies, wiring, troubleshooting).
• Solid understanding of circuits and electronics, with the ability to read schematics and component datasheets.
• Experience with version control systems (e.g., Git) and development methodologies.
• Exceptional problem-solving, analytical, and critical thinking skills.
• Excellent documentation skills.
• Proficiency in English, both written and verbal.
• Passion for emerging technologies and enthusiasm for tackling new challenges.
• Self-motivated and capable of driving development projects to completion.
• Ability to work in Laemchabang, Chonburi.
• Typical Experience.
• 0 to 6 years.
• Typical Education.
• Bachelor's degree in Computer Engineering, Electronics Engineering, Electrical Engineering, or a related field.
• Fresh graduates are encouraged to apply.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

5 years required

Skills:

Automation, Assembly, AutoCAD, English

Job type:

Full-time

• Concept and architect automation stations and assembly lines.
• Analysis and the creation of User Requirement Specification (URS) in order to determine feasibility of using one or more machines.
• Perform engineering calculations with respect to cycle time, strength of materials, speeds, horsepower, temperature, pressure, force, etc.
• Analyze engineering drawings (mechanical and electrical) and specifications to determine if it meets process and products specifications.
• Formalize and update drawing documentation.
• Work with Celestica Global Machinery Standards.
• Liaise with vendors (local and abroad) for technical information and specifications.
• Communicate all requested design changes to various teams (within Celestica).
• Knowledge of AutoCAD and SolidWorks is an asset.
• Understanding of machinery safety and safety devices.
• Understanding of the use of pneumatics and hydraulics.
• Understanding of the use of electrical and motion devices (i.e. servo, VFDs, switches, load cells, etc.).
• Experience with robotic programming is an asset.
• An understanding of machine vision (2D, 3D and machine learning) as it applied to automation stations for identification, quality, robotic offset and alignment.
• Concept and architect automation stations and assembly lines.
• Analysis and the creation of User Requirement Specification (URS) in order to determine feasibility of using one or more machines.
• Perform engineering calculations with respect to cycle time, strength of materials, speeds, horsepower, temperature, pressure, force, etc.
• Analyze engineering drawings (mechanical and electrical) and specifications to determine if it meets process and products specifications.
• Formalize and update drawing documentation.
• Work with Celestica Global Machinery Standards.
• Liaise with vendors (local and abroad) for technical information and specifications.
• Communicate all requested design changes to various teams (within Celestica).
• Knowledge of AutoCAD and SolidWorks is an asset.
• Understanding of machinery safety and safety devices.
• Understanding of the use of pneumatics and hydraulics.
• Understanding of the use of electrical and motion devices (i.e. servo, VFDs, switches, load cells, etc.).
• Experience with robotic programming is an asset.
• An understanding of machine vision (2D, 3D and machine learning) as it applied to automation stations for identification, quality, robotic offset and alignment.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Typical Experience.
• Minimum 5 years in automation design at a machine integrator, or equivalent, designing and concepting machines from small table top to large stations.
• Basic knowledge of printed circuit board assembly/electronics manufacturing are an asset.
• Fluent in English.
• Able to work based in Laem Chabang, Chonburi, Thailand.
• Typical Education.
• Degree in Mechanical Engineering/ Electrical Control Engineering / Robotics/ Mechatronics Automation Technology or related field.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

3 years required

Skills:

Automation, XML, JSON, English

Job type:

Full-time

• Coding and test programming for software of automation machine applications.
• Develop and deploy software applications for automation machine controlling.
• Execute code builds to test and production environments.
• Fix bugs in existing code.
• Collaborate with product, design, and automation/operation teams.
• Maintain documentation and provide machine instruction manual and training.
• Provide testing, documentation, training, and support for third-party software products.
• Resolve user-submitted problems and questions.
• Knowledge/Skills/Competencies.
• Knowledge and experience with good programming language with C#, C++, xml, API, JSON.
• Additional experience with JavaScript, HTML, VB.NET, Python, database is a plus.
• Track record of successful application development is a plus.
• Ability to write clean, well-documented code.
• Excellent complex problem solving and critical thinking skills.
• Solid troubleshooting and communication skills.
• Demonstrated analytical and critical thinking abilities.
• Basic Knowledge with image processing/machine vision, robot programming for automation is a plus.
• Have a passion for this automation job.
• Result-oriented, hard-working, and reliable person.
• Good command of speaking, writing and reading in Thai and English.
• Typical Experience.
• 0-3 years of experience in software development.
• Typical Education.
• Bachelor's Degree or Master's Degree in Computer Science or Electrical Engineering, or related filed.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

5 years required

Skills:

Research, Linux, Data Entry

Job type:

Full-time

• Design and develop technical solutions without assistance in a limited number of technical fields supporting common segments/technologies. May also solve complex problems in cooperation with a team of other engineers.
• Attend and interact in technical customer meetings.
• Research systems ideas and will draw up plans for these systems.
• Design, modify and implement systems that meet customer and Celestica needs.
• Create designs in line with Celesticas procedures, regulations and customer standards.
• Keep up to date with relevant industry knowledge and regulations.
• Solve complex problems.
• Design hardware circuit by using Allegro Cadence Concept HDL tool.
• BOM / ECO /DVN Management.
• Support Hardware bring up in NPI phase and validation of Networking, Storage, and Server products per Design Test Plan.
• Qualify alternative components for compatibility, cost-effectiveness and benchmarking.
• Work with cross-function teams to identify root cause of the design issue.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Familiar with electrical design tools such as Cadence, OrCad.
• Knowledge in Analog circuit design and Digital circuit design ( low speed and high speed ).
• Hands-on lab debugging and troubleshooting.
• Knowledge of Network switch product, x86 or ARM platform.
• Knowledge of BOM structure and Engineering change process.
• Knowledge of Linux command.
• Self-motivated with a strong multidisciplinary background.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 3 to 5 years of related experienc;Experience in similar job roles.
• Typical Education.
• Bachelors Degree in Electronic Engineering or equivalent.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

No experience required

Skills:

Mechanical Engineering, Electrical Engineering, English

Job type:

Full-time

• Provide day to day installation, maintenance, and repair of all facilities in the data center.
• 24x7 shift work responsibility when qualified and designated.
• Provide requested reporting and documentation.
• Support of facility, development, and construction teams.
• Perform tasks as assigned by DC operation manager.
• Respond to customer requests, power, cooling, and facility audits.
• First tier investigate any power, communication, or cooling anomalies.
• Attend assigned meetings and training.
• Assist in ensuring customer compliance with GSA Acceptance Usage Policy (AUP).
• Provide technical escort when needed.
• Job Qualifications.
• Must be familiar with safety requirements and OSHA regulations or Thailand safety regulations.
• Basic understanding of electrical and mechanical systems that may be employed in a data center environment. This may include electrical feeders, transformers, generators, switchgear, UPS systems, DC power systems, ATS/STS units, PDU units, air handling units, cooling towers, and fire suppression systems.
• Familiar with Interpret wiring diagrams, schematics, and electrical drawings.
• Ability to express ideas clearly, concisely, and effectively with contractors performing maintenance or upgrades on systems installed in the data center environment.
• Excellent verbal, written, and interpersonal communication skills.
• Ability to analyze and make suggestions for problem resolution.
• Solve problems with good initiative and sound judgment.
• Creativity, problem solving skills, negotiation and systematic thinking.
• Fluent in English both written and verbal (Minimum 500 TOEIC score).
• Goal-Oriented, Unity, Learning, Flexible.

Experience:

No experience required

Skills:

Mechanical Drawing, Electrical Engineering, English

Job type:

Full-time

• On duty and take responsibility when absence DC operation manager.
• Quality assurance of Technician work performed along with associated documentation.
• Maintenance of supply and tool inventory used by MEP system.
• Management and reporting of Technician hours worked.
• Ensure compliance of policies and procedures by Technicians.
• Mentoring and leadership on data center floor for technicians.
• Support of construction, research, and development activity.
• Good understanding of electrical and mechanical systems that may be employed in a data center environment. This may include electrical feeders, transformers, generators, switchgear, UPS systems, DC power systems, ATS/STS units, PDU units, air handling units, cooling towers, and fire suppression systems.
• Must be familiar with safety requirements and OSHA regulations governing a multi-megawatt facility.
• Interpret wiring diagrams, schematics, and electrical drawings.
• Job Qualifications.
• Familiar with Microsoft Suite, BMS, EPMS, CPMS and CMMS.
• Travel may be requested by GSA.
• The data center is a 24 hour/7 day operation.
• Excellent verbal, written, and interpersonal communication skills.
• Ability to express ideas clearly, concisely and effectively with contractors installing, performing maintenance or upgrade work on systems installed in the data center environment.
• Ability to analyze and make suggestions for problem resolution.
• Solve problems with good initiative and sound judgment.
• Make decisions independently with minimal guidance.
• Creativity, problem solving skills, negotiation and systematic thinking.
• Fluent in English both written and verbal (Minimum 500 TOEIC score).
• Goal-Oriented, Unity, Learning, Flexible.