Filter Jobs

Experience:

7 years required

Skills:

Contracts, Procurement, AutoCAD

Job type:

Full-time

• Maintain and assure the asset integrity, maintenance and inspection for subsea facilities, topside structure, and equipment by professional execution of subsea work as planned with best practice implementation.
• Support lead Subsea Engineer to prepare, negotiate, manage and execute all subsea Contracts (Service Standards, Competencies, Quality, SSHE, Costs and Audits).
• Create, update, and implement a Structural Integrity Management and Risk Base Inspection (SIM-RBI) program acceptable to Company and DMF in order to reduce and optimize ...
• Create, update, and implement a Pipeline External Integrity Management and Risk Base External Inspection (RBEI) program acceptable to Company and DMF in order to reduce and optimize all costs.
• Manage, update the database of SIM-RBI study reports, subsea inspection report, subsea anomaly list and dashboard.
• Review the technical dossier of any new contractors asking to be pre-qualified.
• Manage and execute all offshore operations on the vessels as a Superintendent, Offshore Manager and/or Company Site Representative.
• Supervise the cost control of the intervention of subsea works and participate in budget preparation.
• Ensure that all works are conducted along the recommendations of the IMCA.
• Design, fabricate and test specific ROV or diving tool. Conduct the relevant audits on vessels, ROV and diving systems.
• Keep up to date on new regulations in the ROV and diving industry as well as cost saving and new technologies.
• Execute subsea maintenance and inspection campaign using ROV, saturation, air diving and any other new technologies.
• Prepare short and long term planning of routine inspection programs. Evaluate and demonstrate that subsea inspection program is done in a cost-effective manner.
• Key Accountabilities (Continued).
• Prepare and conduct the offshore campaigns.
• Report on findings and issue all relevant work orders for corrective action.
• Maintain the Underwater Inspection Database of all anomalies, repairs and modifications.
• Prepare and process the procurement for the routine and specific contracts of subsea inspection.
• Technically assist asset in the engineering analysis of damages of incidents.
• Provide recommendation on mitigation plan for reported anomalies/damages/ incidents and follow up with concerned parties to close out all the needed actions.
• Design and update the EPRS philosophy, identify the possible worst case scenarios and their corrective actions.
• Identify the needed equipment, materials and specialized tools.
• Prepare budget, stock and maintenance of all purchased EPRS items.
• Locate, contract and mobilize the marine spread for initial inspection at the best cost.
• Participate in the establishment/review of related procedures.
• Participate in the technical review as well as the operability/security audits.
• Promote the implementation of company s SSHE policy and regulations in all works under responsibility.
• Professional Knowledge & Experiences.
• Bachelor s degree in any field with a preference in Subsea, Civil, Mechanical or Offshore Engineering.
• A minimum of 7 years working experience.
• A minimum of 5 years working in the offshore and/or Oil and Gas industry with a cumulated offshore time of no less than 2 years.
• Possess AutoCAD skills and full computer proficiency.
• Capable of drafting the specific contractual clauses in an ROV and/or diving contract.
• Well up to date and connected with all known Sub Sea contractors and vendors, capable of selecting the right marine spread and equipment for each specific operation. Keep up to date on the pre-qualification program of Contractors.
• Fully conversant on all Sub Sea inspection and NDE techniques, tools and equipment.
• Fully competent on all EPRS equipment and tools.
• Fully conversant on all ROV and diving techniques, rules and regulation and the IMCA.
• Have prepared, organized and conducted alone a minimum of 2 full routine inspection campaigns.

Skills:

AutoCAD

Job type:

Full-time

• วางแผนและควบคุมการดำเนินงานโครงการก่อสร้างโรงแรมขนาดใหญ่ให้เสร็จสิ้นตามกรอบเวลา งบประมาณ และคุณภาพที่กำหนด.
• กำกับดูแลผู้รับเหมาหลักและผู้รับเหมาช่วงให้ปฏิบัติงานตามแผนและมาตรฐานที่กำหนด.
• ประสานงานกับฝ่ายออกแบบ วิศวกร สถาปนิก และที่ปรึกษาโครงการ เพื่อให้การดำเนินงานเป็นไปอย่างราบรื่น.
• จัดทำและนำเสนอรายงานความคืบหน้าของโครงการต่อผู้บริหารและผู้มีส่วนได้ส่วนเสีย.
• ควบคุมและจัดการความเสี่ยง รวมถึงแก้ไขปัญหาหน้างานอย่างมีประสิทธิภาพ.
• ตรวจสอบคุณภาพงาน (QA/QC) และความปลอดภัยในการทำงานตลอดระยะเวลาการก่อสร้าง.
• ปริญญาตรีหรือโทในสาขาวิศวกรรมโยธา สถาปัตยกรรม หรือสาขาอื่นที่เกี่ยวข้อง.
• มีประสบการณ์ในตำแหน่ง Project Manager ในโครงการก่อสร้างโรงแรมขนาดใหญ่ (300 ห้องขึ้นไป) อย่างน้อย 5-7 ปี.
• มีประสบการณ์การควบคุมและบริหารงานก่อสร้างโรงแรมระดับ 4-5 ดาว หรืออาคารเชิงพาณิชย์ขนาดใหญ่.
• มีทักษะการบริหารจัดการโครงการขนาดใหญ่และการแก้ไขปัญหาเฉพาะหน้าได้ดี.
• สามารถอ่านและตีความแบบก่อสร้างได้อย่างแม่นยำ รวมถึงมีความเชี่ยวชาญในซอฟต์แวร์บริหารโครงการ เช่น MS Project, AutoCAD, Primavera.
• มีความเข้าใจในมาตรฐานสากลด้านการก่อสร้างโรงแรมและข้อกำหนดของอาคาร.
• หากมีใบอนุญาตประกอบวิชาชีพวิศวกรรม (กว.) หรือ Certified Project Manager จะได้รับการพิจารณาเป็นพิเศษ.
• มีความสามารถในการบริหารทีมและประสานงานกับหลายฝ่ายในเวลาเดียวกัน.

Experience:

3 years required

Skills:

Product Design, SOLIDWORKS, AutoCAD, English

Job type:

Full-time

• Develop the most efficient ways to use people, machines, materials, information, and resources to make our products.
• Help the company to increase productivity by optimizing methods and processes.
• Perform mathematical calculations to define manufacturing processes (cycle time, machine capability, productivity, production).
• Calculate and analyze production costs.
• Propose the most viable and productive factory layout, and design of workspace environment (ergonomics).
• Study and rearrange org charts, material flow, and operations sequence.
• Develop manufacturing and information systems to improve efficiency.
• Evaluate effects of product design changes, process design change.
• Contribute to resolve production problems.
• Evaluate effects of product design changes.
• Qualification Requirements: Bachelor's degree or higher in an Industrial Engineer.
• 3-5 years of experience preferably with the automotive industry in the field of continuous improvement.
• Good command of written and spoken English.
• Knowledge of SolidWorks, AutoCAD.
• Knowledge of SPC/KAIZEN/LEAN method.
• Excellence in MS Office especially MS Excel.
• Inquisition mind / Creative Thinking / Problem Solving.

Experience:

5 years required

Skills:

Automation, Assembly, AutoCAD, English

Job type:

Full-time

• Concept and architect automation stations and assembly lines.
• Analysis and the creation of User Requirement Specification (URS) in order to determine feasibility of using one or more machines.
• Perform engineering calculations with respect to cycle time, strength of materials, speeds, horsepower, temperature, pressure, force, etc.
• Analyze engineering drawings (mechanical and electrical) and specifications to determine if it meets process and products specifications.
• Formalize and update drawing documentation.
• Work with Celestica Global Machinery Standards.
• Liaise with vendors (local and abroad) for technical information and specifications.
• Communicate all requested design changes to various teams (within Celestica).
• Knowledge of AutoCAD and SolidWorks is an asset.
• Understanding of machinery safety and safety devices.
• Understanding of the use of pneumatics and hydraulics.
• Understanding of the use of electrical and motion devices (i.e. servo, VFDs, switches, load cells, etc.).
• Experience with robotic programming is an asset.
• An understanding of machine vision (2D, 3D and machine learning) as it applied to automation stations for identification, quality, robotic offset and alignment.
• Concept and architect automation stations and assembly lines.
• Analysis and the creation of User Requirement Specification (URS) in order to determine feasibility of using one or more machines.
• Perform engineering calculations with respect to cycle time, strength of materials, speeds, horsepower, temperature, pressure, force, etc.
• Analyze engineering drawings (mechanical and electrical) and specifications to determine if it meets process and products specifications.
• Formalize and update drawing documentation.
• Work with Celestica Global Machinery Standards.
• Liaise with vendors (local and abroad) for technical information and specifications.
• Communicate all requested design changes to various teams (within Celestica).
• Knowledge of AutoCAD and SolidWorks is an asset.
• Understanding of machinery safety and safety devices.
• Understanding of the use of pneumatics and hydraulics.
• Understanding of the use of electrical and motion devices (i.e. servo, VFDs, switches, load cells, etc.).
• Experience with robotic programming is an asset.
• An understanding of machine vision (2D, 3D and machine learning) as it applied to automation stations for identification, quality, robotic offset and alignment.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Typical Experience.
• Minimum 5 years in automation design at a machine integrator, or equivalent, designing and concepting machines from small table top to large stations.
• Basic knowledge of printed circuit board assembly/electronics manufacturing are an asset.
• Fluent in English.
• Able to work based in Laem Chabang, Chonburi, Thailand.
• Typical Education.
• Degree in Mechanical Engineering/ Electrical Control Engineering / Robotics/ Mechatronics Automation Technology or related field.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Skills:

Assembly, Excel, Compliance

Job type:

Full-time

• Quality Issue Resolution: Address body assembly quality issues using effective problem-solving methods and quality control (QC) tools.
• New Model Development: Support the development of new models by ensuring precision in body dimensions and production processes.
• 3D Drawing Proficiency: Read and create 3D drawings to facilitate design changes and improvements.
• Process Improvement: Enhance production processes to boost efficiency and quality in body assembly.
• Defect Investigation: Investigate defects and implement solutions to achieve quality targets (DPHU).
• Cross-Functional Collaboration: Work with cross-functional teams from R&D, production, and suppliers to meet project objectives.
• Data Tracking and Reporting: Track and report key quality data using Microsoft Excel, and present findings using PowerPoint.
• Technical Support: Provide technical assistance to the production team to uphold high standards in body assembly.
• Continuous Improvement: Participate in Kaizen activities to foster ongoing improvements in body assembly.
• Safety and Compliance: Adhere to safety, quality, and environmental regulations in all tasks.
• Qualifications Bachelor's degree in Mechanical Engineering, Mechatronic Engineering, Automotive Engineering, or a related field.
• Strong problem-solving skills with experience in using QC tools.
• QC Tools Knowledge: Familiarity with QC tools such as Fishbone diagrams, Pareto charts, 5 Whys, Fault Tree Analysis (FTA), root cause analysis.
• Proficient in reading and creating 3D drawings using AutoCAD, CATIA, or similar software.
• Skilled in Microsoft Excel for data analysis and PowerPoint for presentations.
• Able to communicate, discuss, and present in English (TOEIC score of 550 or higher).
• Strong collaboration skills and the ability to work effectively with various departments.
• Excellent interpersonal relations, positive attitude, punctuality, responsibility, and the ability to work under high pressure.
• Logical thinking, analytical skills, problem solving skills & decision making, proactive approach to challenges and learn new things.
• If you are interested in this job role, please prepare your updated resume or LinkedIn profile for the application process through the Nissan Job Portal.
• Only shortlisted candidate will be contacted for an interview".
• For more information about Nissan's products, services, and commitment to sustainable mobility, visit nissan-global.com. You can also follow us on Facebook, Instagram, X and LinkedIn and see all our latest videos on YouTube.
• Why Nissan?.
• You will definitely get the right answers why you should join us through watching the video on YouTube.
• Samut Prakan Thailand

Skills:

Budgeting, Microsoft Office, Excel

Job type:

Full-time

• Responsible as role of a project Management, taking care network development plan, a new distribution center and a new project for existing operations, the main area response is expansion of the distribution network for supporting the rapid growth of new stores opening. End- to-End control from the beginning of warehouse development to the end handover. Including propose a proposal, budgeting, contract and registration, process design, system design, project implementation, and operation running in migration phase.
• Co-ordinates with internal & external team members to serve demands in the future supply chain & logistics management focusing in networking development & warehousing part.
• Collect and analyze data relating to logistics operations and determine optimal logistics operating solutions focusing in networking development & warehousing part. Include improving warehouse processes and layout design.
• To ensure that all recommended solutions, implementation plans, meet the requirements. Manages project implementations with all stakeholders and related parties as a project manager.
• Keep up with the latest trends and innovations in warehousing and logistics.
• Other projects or feasibility studies upon assignment.
• Bachelor Degree of Supply Chain, Logistic, Economic and other relate filed (Supply chain management, warehousing design is an advantage.).
• Have Experience 3-5 Years in DC Network Planning, Hub Network Planning, Warehouse operations, Project implementation and WMS.
• Have Experience of Control End-to-End for a new Distribution center is an advantage.
• Strong analytical and numerical skill is mandatory.
• Proficient in Microsoft Office Applications. (Excel, PowerPoint and Visio), AutoCAD, and Microsoft Project is an advantage.

Job type:

Full-time

• Good project Management and construction Management skills in project tracking and construction work process.
• Create and control pre-construction and construction work checklists to meet standards and quality.
• Follow up on pre-construction and construction work processes and immediately notify the team of any delays
• ability to communicate clearly and concisely, both orally and in writing.
• Basic skills in AutoCAD, Microsoft Word, Excel, PowerPoint and Microsoft Project.